Samsung Sgh I997 Update Download

Copy and paste this link to your website, so they can see this document directly without any plugins.


Keywords

your, allows, Home, that, phone, with, From, from, screen,, will, this, page, more, device, Settings, when, screen, information,, then, refer, following, using, Your, This, mobile, have, displays, information, Google, Note:

Transcript

P O R T A B L E Q U A D - B A N D
M O B I L E P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
ATT_SGH_i997_Dempsey_UM_KD5_WC_050911_F8
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
2011 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone? For 24 hour information and assistance, we offer a new FAQ/ARS System
(Automated Response System) at: http://www.samsung.com/us/support
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Toll Free Tel:
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc., or its
affiliates in the United States and/or other countries.
ACCESS® and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Openwave® is a registered Trademark of Openwave, Inc.
and are trademarks of SRS Labs, Inc. CS Headphone and WOW HD technologies are incorporated under license from
SRS Labs, Inc.
, DivX®, DivX Certified® and associated logos are registered trademarks of DivX, Inc. and are used under license. DivX
Certified® to play DivX® video up to HD 720p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video.
Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information
on how to complete your registration.
Google, the Google logo, Android, the Android logo, Android Market, Gmail, Google Mail, Google Apps, Google Calendar, Google Checkout,
Google Earth, Google Latitude, Google Maps, Google Talk, Picasa, and YouTube are trademarks of Google Inc.
Wi-Fi is a registered trademark of the Wireless Fidelity Alliance, Inc.
Swype and the Swype logos are trademarks of Swype, Inc. © 2011 Swype, Inc. All rights reserved.
Devices purchased for use on AT&T's system are designed for use exclusively on AT&T's system. You agree that you won't make any
modifications to the Equipment or programming to enable the Equipment to operate on any other system. A voice plan is required on all
voice-capable devices, unless specifically noted otherwise in the terms governing your agreement. Some devices or plans may require you
to subscribe to a data plan.
TM
Your phone is designed to make it easy for you to access a wide variety of content. For your protection, AT&T wants you to be aware that
some applications that you enable may involve the location of your phone being shared. For applications available through AT&T, AT&T
offers privacy controls that let you decide how an application may use the location of your phone and other phones on your account.
However, AT&T's privacy tools do not apply to applications available outside of AT&T. Please review the terms and conditions and the
associated privacy policy for each location-based service to learn how location information will be used and protected.
Your phone may be used to access the Internet and to download, and/or purchase goods, applications, and services from AT&T or
elsewhere from third parties. AT&T provides tools for you to control access to the Internet and certain Internet content. These controls may
not be available for certain devices which bypass AT&T controls.
AT&T may collect certain types of information from your device when you use AT&T services to provide customer support and to improve
its services. For more information on AT&T's Privacy Policy, visit http://www.att.com/privacy.
Dynamic Noise Suppression from Audience™
Your phone is equipped with an advanced voice processing chip that delivers clear mobile calls by suppressing background noise,
intermittent sounds (like a siren or nearby conversation), and echoes, allowing you to hear and be heard nearly anywhere.
How Does It Work?
Based on the intelligence of the human hearing system, the technology:
• Captures, evaluates and distinguishes all the sound signals surrounding your phone, and the person you're speaking with.
• Then isolates the primary voice in conversation and filters out the background noise - so the person you're calling hears only your voice, without
disturbing background noise.
• Dynamically equalizes and adjusts voice volume to optimize your calling experience, so you can hear clearly and don't need to speak louder to overcome
surrounding noise.
The noise suppression technology is built-in and already enabled in your new mobile phone. So it's ready to provide unsurpassed voice
clarity with every call.
Open Source Software
This product includes certain free/open source software. The exact terms of the licenses, disclaimers, acknowledgements and notices are
available on the Samsung's website http://opensource.samsung.com.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
1
Table of Contents
Section 1: Getting Started ..............................................5
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Charging a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Switching the Phone On or Off . . . . . . . . . . . . . . . . . . . . . . . . 10
Locking and Unlocking the Touch Screen . . . . . . . . . . . . . . . . 10
Setting up your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Creating a New Google Account . . . . . . . . . . . . . . . . . . . . . . . 12
Retrieving your Google Account Password . . . . . . . . . . . . . . . 12
Setting Up Your Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Section 2: Understanding Your Phone .........................14
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Side Views of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Rear View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Display Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Customizing Your Home Screen . . . . . . . . . . . . . . . . . . . . . . . 31
Notification Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Section 3: Call Functions .............................................40
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . 40
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Making a Call Using Speed Dial . . . . . . . . . . . . . . . . . . . . . . . 41
Making a Call from the Address Book . . . . . . . . . . . . . . . . . . . 42
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Prefix Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Call Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Call Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Options During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Using the Speakerphone During an Active Call . . . . . . . . . . . . 49
Section 4: Entering Text ............................................... 52
Text Input Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Entering Text Using the Samsung QWERTY Keypad . . . . . . . . 52
Changing the Text Input Mode - Keypad . . . . . . . . . . . . . . . . . 53
Using Abc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Using Symbol/Numeric Mode . . . . . . . . . . . . . . . . . . . . . . . . . 54
Using XT9 Predictive Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Entering Text Using the Android Keyboard . . . . . . . . . . . . . . . 55
Entering Text Using Swype . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using the Handwriting Feature . . . . . . . . . . . . . . . . . . . . . . . . 57
Using the Voice to Text Feature . . . . . . . . . . . . . . . . . . . . . . . 58
Section 5: Contacts and Your Address Book .............. 60
AT&T Address Book Activation . . . . . . . . . . . . . . . . . . . . . . . . 60
Adding a New Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Editing an Existing Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Joining Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
2
Synchronizing Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Address Book Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Address Book Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Managing Address Book Entries . . . . . . . . . . . . . . . . . . . . . . . 71
Section 6: Multimedia .................................................. 73
Media Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Using Playlists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Live TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Video Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Using the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Using the Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Section 7: Messaging ................................................... 91
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Creating and Sending Messages . . . . . . . . . . . . . . . . . . . . . . 91
Message Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Viewing New Received Messages . . . . . . . . . . . . . . . . . . . . . 94
Deleting Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Message Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Using Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Using Gmail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Google Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Section 8: Changing Your Settings ............................ 100
Wireless and Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Location and Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Accounts and Synchronization . . . . . . . . . . . . . . . . . . . . . . . 117
Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Android System Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Safe Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
SD card and phone storage . . . . . . . . . . . . . . . . . . . . . . . . . 119
Locale and text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Voice Input and Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Accessibility Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
About Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Section 9: Connections .............................................. 126
Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
PC Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Media Playback on HD TV . . . . . . . . . . . . . . . . . . . . . . . . . . 139
3
Using your TV Remote for Media Playback . . . . . . . . . . . . . . 140
Section 10: Applications ............................................142
AllShare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Angry Birds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
AT&T Code Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
AT&T FamilyMap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
AT&T Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Facebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Gmail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Google Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Latitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Live TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Market . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Media Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Mini Diary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
My Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
myAT&T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
News & Weather . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Places . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Quickoffice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Task Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Video Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Voice Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Voice Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Write and Go . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
YPmobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Section 11: Health and Safety Information ............... 166
Exposure to Radio Frequency (RF) Signals . . . . . . . . . . . . . . 166
Specific Absorption Rate (SAR) Certification Information . . . . 170
Smart Practices While Driving . . . . . . . . . . . . . . . . . . . . . . . 172
Battery Use and Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 174
UL Certified Travel Charger . . . . . . . . . . . . . . . . . . . . . . . . . 175
Display / Touch-Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
GPS & AGPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
4
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
FCC Hearing Aid Compatibility (HAC) Regulations for
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Restricting Children's Access to Your Mobile Device . . . . . . . 184
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Other Important Safety Information . . . . . . . . . . . . . . . . . . . 184
Section 12: Warranty Information ............................. 186
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 186
End User License Agreement for Software . . . . . . . . . . . . . . 189
Section 13: Samsung Product Registration ..............195
Index ............................................................................196
5
Section 1: Getting Started
This section explains how to start using your phone by first
configuring your hardware, activating your service, and then
setting up your voice mail.
Setting Up Your Phone
Prior to use it is necessary to install both the battery and SIM into
their corresponding internal compartments. The microSD™ card
slot is also located in this same internal area.
1. Remove the back cover by inserting a fingernail into the
slot on the bottom side of your phone (1).
2. Lift the cover up (2) and away from the phone (3).
Installing the SIM Card
When you subscribe to a cellular network, you are provided with
a plug-in SIM card loaded with your subscription details, such as
your PIN, available optional services, and many others features.
Getting Started 6
Important!: The plug-in SIM card information and its contacts can be easily
damaged by scratching or bending, so be careful when handling,
inserting, or removing the card. Keep all SIM cards out of reach
of small children.
 Carefully slide the SIM card into the SIM card socket (as
shown) until the card locks into place.
• Make sure that the card’s gold contacts face into the phone and
that the upper-left angled corner of the card is positioned as shown.
Note: If the card is not inserted correctly, the phone will not detect the SIM
card. Re-orient the card back into the slot if the SIM is not detected.
Removing and Installing the Memory Card
Your device comes with a 2GB memory card already inserted.
You can use another microSD™ (SD) or microSDHC™ card to
expand available memory space if you desire. This secure digital
card enables you to exchange images, music, and data between
SD-compatible devices. This type of memory card is designed for
use with this mobile phone and other devices.
Note: Your phone has been tested to support up to a 32GB memory card.
Removing the Memory Card
1. Remove the battery. Use your thumbnail or a sharp object
to lift the battery up (1) and then away from the device (2).
Correct
Incorrect
7
2. Push on the memory card until it clicks and is released.
3. Grasp the memory card and remove it from the phone.
Installing the Memory Card
1. Remove the battery. For more information, refer to
“Removing the Memory Card” on page 6.
2. Push the microSD card into the slot until it clicks (as
shown).
• Make sure the microSD’s gold contact pins face upward and the
card is securely inserted.
For more information on Memory Cards, see “Memory Card” on
page 37.
Incorrect
Correct
Getting Started 8
Installing the Battery
1. Insert the battery into the opening on the back of the
phone, making sure the connectors align (1).
2. Gently press down to secure the battery (2).
Installing the Back Cover
1. Place the battery cover onto the back of the phone (1) and
press down (2).
9
2. Press along the edge of the back cover (3) until you have a
secure seal.
Note: Make sure the battery is properly installed before switching on the
phone.
Charging a Battery
Your device is powered by a rechargeable Li-ion battery. The
Travel Charger that is used to charge the battery, is included with
your device. Use only Samsung-approved batteries and chargers.
Note: Long backlight settings, searching for service, vibrate mode, web
browser use, and other variables may reduce the battery’s talk and
standby times.
Although you can use the phone while the battery is charging,
doing so will require additional charging time.
Note: You must fully charge the battery before using your phone for the first
time. A discharged battery recharges fully in approximately 4 hours.
Using the Travel Charger
Important!: Verify that the handset battery is installed prior to connection. If
the battery is not properly installed and the wall charger is
connected, the handset may power off and on continuously,
preventing proper operation.
1. Plug the flat end of the Travel Charger into the Power/
Accessory Interface connector and the other end into a
standard AC wall outlet.
IncorrectCorrect
Getting Started 10
2. When charging is finished, remove the flat end from the
interface connector jack on the phone.
Warning!: If your handset has a touch screen display, please note that a
touch screen responds best to a light touch from the pad of your
finger. Using excessive force or a metallic object when pressing on
the touch screen may damage the tempered glass surface and
void the warranty. For more information, refer to “Standard
Limited Warranty” on page 186.
Note: Failure to unplug the wall charger before you remove the battery, can
cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon ( ) blinks and the device sounds a
warning tone at regular intervals. In this condition, your phone
conserves its remaining battery power, not by turning off the
backlight, but by entering the dimming mode. For a quick check
of your battery level, glance at the battery charge indicator
located in the upper-right corner of your device’s display. Solid
color ( ) indicates a full charge.
When the battery level becomes too low, the phone automatically
turns off.
Switching the Phone On or Off
1. Press and hold (on the upper right side of the
phone) until the phone switches on.
2. Sweep your finger across the screen to unlock the phone.
Note: The display language is preset to English at the factory. To change the
language, use the Language menu. For more information, refer to
“Changing Your Settings” on page 100.
3. To switch off the phone, press and hold , until the
Phone options screen displays.
4. Tap Power off.
The Power off screen is displayed.
5. Tap Yes to switch off the phone.
Locking and Unlocking the Touch Screen
1. Press to lock the touch screen.
2. Press again to display the main screen then
sweep your finger across the screen to unlock the touch
screen.
11
Setting up your Phone
When you first turn on your phone, you will need to set up a few
things.
1. The Welcome! screen of the Setup Wizard is displayed. Tap
Next to continue.
Note: If at any time during the Setup procedure you need to quit to make an
emergency call, tap Emergency call from any of the five Setup Wizard
pages.
2. At the Set up Wi-Fi screen, the available Wi-Fi networks are
displayed. Tap the network you want to connect to. For
more information, refer to “Wi-Fi” on page 132.
3. Tap Next.
4. At the Set up accounts screen, tap one of the following
options or tap Next to continue. You can set up accounts
later if you prefer.
• Google account: allows you to set up a Google account. For more
information, refer to “Creating a New Google Account” on
page 12.
• Exchange account: allows you to set up email with an exchange
server. For more information, refer to “Synchronizing a
Corporate Email Account” on page 97.
• Other email accounts: allows you to set up other email accounts
such as Yahoo, Hotmail, etc. For more information, refer to “Using
Email” on page 96.
5. Tap Next.
6. At the Set up Social Networks screen, tap a Social Network
that you would like to connect to. Choose Facebook,
Twitter, or MySpace. You can set up Social Networks later if
you prefer. For more information, refer to “Synchronizing
Accounts” on page 67.
7. Tap Next.
8. At the Use Google location screen, a green checkmark
appears next to the text that explains that you allow
Google’s location service to collect anonymous location
data from your phone. If you disagree, tap the checkmark
to remove it.
9. Tap Finish.
Note: If you do not have a network connection, the Set up accounts screen
and the Set up Social Networks screen will be skipped.
Getting Started 12
Creating a New Google Account
In order to utilize your device to the fullest extent, you will need
to create a Google™ Account when you first use your device.
With a Google Account, Google applications will always be in
sync between your phone and computer.
After you start your phone for the first time, follow these steps:
1. From the Home screen, tap Applications ➔
Gmail .
The Add a Google Account screen displays.
2. Tap Next to continue.
3. Follow the on-screen instructions to create Google
Account.
Note: If you already have a Google account, you only need to sign in.
Retrieving your Google Account Password
A Google account password is required for Google applications. If
you misplace or forget your Google Account password, follow
these instructions to retrieve it:
1. From your computer, use an Internet browser to navigate
to http://google.com/accounts.
2. Once the URL loads, click on the Can’t access your
account? link.
3. From the Please select your issue section, select I forgot my
password.
4. Select Reset your password here, then follow the password
recovery procedure.
13
Setting Up Your Voice Mail
1. From the Home screen, tap , then touch and hold
.
You may be prompted to enter a password.
2. Follow the tutorial to create a password, record a greeting,
and record your name.
Note: These steps may be different depending on your network.
Accessing Your Voice Mail
1. From the Home screen, tap , then touch and hold
.
2. When connected, follow the voice prompts from the voice
mail center.
Accessing Your Voice Mail From Another Phone
1. Dial your wireless phone number.
2. When you hear your voicemail greeting, press the asterisk
key on the phone you are using.
3. Enter your password.
Understanding Your Phone 14
Section 2: Understanding Your Phone
This section outlines some key features of your phone and
describes the screen and the icons that appear when the phone
is in use. It also shows how to navigate through the phone and
provides information on using a memory card.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many useful
features. The following list outlines a few of the features included
in your phone.
• First Rel. 7, HSPA+ (4G) device for AT&T with HSDPA CAT 14 (21.1
Mbps) and HSUPA CAT 6 (5.76 Mbps) high speed download capability
• Touch screen provides quick response to a variety of in-phone menus
and options including applications and seven home screens
• Solid 2.2 Android platform
• Full HTML Web Browser with Adobe® Flash® 10.1 Support
• Built-in Bluetooth and Wi-Fi technology
• Brilliant 4.5" Super AMOLED™ Plus Screen with Ultra-thin Design
• Video Chatting and 8 Megapixel camera and camcorder
• AT&T GPS Navigation functionality provides real-time navigation
• Pre-installed 2GB microSD™ card with select movie trailers
• Up to 32GB expandable memory slot
• Sync and update social network applications
Front View of Your Phone
7
3
2
4
5
8 96
1
10
11
12
15
1. Proximity sensors: use the ambient light level to adjust
keypad access. If the light path is blocked, for example,
when holding the phone close to your ear, the touch screen
will turn off.
2. Front-facing Camera: allows you to take pictures and
videos of yourself and to video chat.
3. Home screen indicator: shows which Home screen is
presently displayed.
4. Application icons: you can place shortcuts to your
favorite applications on the Home screen.
5. Primary shortcuts: allows quick access to important
features such as Dialer, Email, Web, and Applications. For
more information, refer to “Primary Shortcuts” on
page 17.
6. Menu key: allows you to access sub-menus with
additional options for different features and applications
such as Home screen, Phone, Contacts, Messaging, and
Web.
7. Home key: allows you to return to the main Home screen
from any Home screen or menu. Touch and hold to display
the Recent application list and access the Task Manager.
8. Back key: allows you step backwards when navigating a
menu or web page.
9. Search key: allows you to access the Google Search
feature where you can search for items on the internet.
10. Google Quick Search bar: a shortcut to Google Search
that allows you to search for items on the internet.
11. Indicator icons: shows the information needed to operate
your phone, such as the received signal strength, phone
battery level, time, unread Emails, missed calls, etc.
12. External speaker: allows you to hear the caller.
Side Views of Your Phone
1. Volume keys: allow you to adjust the ringer volume while in
standby mode or adjust the voice volume during a call.
When receiving an incoming call, briefly press down either
volume key ( ) to mute the ring tone. Press
and hold either volume key to reject the call and send it
directly to voicemail.
2. Microphone: allows other callers to hear you when you are
speaking to them.
3. Power/Accessory Interface port: allows you to connect a
Travel Charger or other optional accessories such as a
USB/data cable or a hands-free headset for convenient,
hands-free conversations.
4. Power on/off and Lock key: ( ) lets you turn the
tablet power on or off. This key is also used to lock or
unlock the touch screen. For more information on locking
your phone, see “Locking and Unlocking the Phone” on
page 29.
5. Microphone: allows other callers to hear you when you are
speaking to them using the speakerphone.
6. 3.5mm Headset jack: allows you to plug in headphones.
4
32
1
5
6
Understanding Your Phone 16
17
Rear View of Your Phone
1. Camera lens: is used to take pictures and shoot videos.
2. Flash: is used to take pictures when lighting is not
adequate.
3. External speaker: allows you to hear when the
Speakerphone is turned on.
Display Layout
Your display screen provides a wealth of information about the
phone’s status and options, as well as providing access to
application icons. For more information, refer to “Front View of
Your Phone” on page 14.
Primary Shortcuts
There are four non-movable Application Shortcuts that appear at
the bottom of all Home screens. The default shortcuts are:
• Phone for dialing a number.
• Email for creating and viewing Email.
• Web for surfing the Internet.
• Applications for accessing the applications on your phone.
While viewing the Applications Menu, the Application shortcut
changes to Home , which returns you to the Main screen.
You can change the Phone, Email, and Web application shortcuts
to any icon that is displayed in the Applications menu.
For more information, refer to “Adding and Removing Primary
Shortcuts” on page 32.
1
2
3
Understanding Your Phone 18
Indicator Icons
This list identifies the symbols you’ll see on your phone’s display
and Indicator area:
Displays your current signal strength. The greater the
number of bars, the stronger the signal.
Indicates that Flight Mode is active. You cannot send
or receive any calls or access online information.
Displays when there is no SIM card in the phone.
Displays when there is a system error or alert.
Flashes on and off when a call is in progress and you
have navigated away from the call screen.
Displays when a call is on hold and you have
navigated away from the call screen.
Displays when the speakerphone is on.
Displays when a call has been missed.
Displays when Call forwarding is set to Forward always.
For more information, refer to “Call Settings” on
page 106.
Displays your battery charge level. Icon shown is fully
charged.
Displays when your battery is charging. Also displays
battery charge level.
Device Power Critical – Shows your current battery
only has three percent power remaining and will
immediately shutdown.
Displays when your connection to an EDGE network is
active.
Displays when your phone is communicating with the
EDGE network.
Displays when your connection to an HSPA+ or 3G
network is active.
Displays when your phone is communicating with the
HSPA+ or 3G network.
Displays when an external microSD memory card is
safe to remove.
19
Displays when an internal microSD memory card
is full.
Displays when the phone is connected to a computer
via a supported USB cable connection.
Displays when a new text or multimedia message is
received.
Displays when a new voice mail is received.
Displays when Email is received.
Displays when you set an alarm to ring at a specified
time. For more information, refer to “Alarm” on
page 148.
Displays when the date for a Calendar Event has
arrived. For more information, refer to “Calendar” on
page 146.
Displays when the Sound profile is set to Silent mode
and Vibrate is set to Never or Only when not in silent
mode.
Displays when the Sound profile is set to Silent mode
and Vibrate is set to Always or Only in silent mode.
Displays when you activate the Mute feature during an
active call.
Displays when Bluetooth is activated.
Displays when a Bluetooth device has been paired
with the phone.
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless Access
Point (WAP).
Displays when GPS is acquiring a signal.
Displays when GPS is active.
Displays when Mobile AP has been activated. For more
information, refer to “Mobile AP” on page 101.
Displays when TTY device has been inserted.
Understanding Your Phone 20
For more details on configuring your phone’s settings, see
“Changing Your Settings” on page 100.
Application Icons
The Application menu provides quick access to the items you use
most frequently.
The following table contains a description of each application. If
the application is already described in another section of this
user manual, then a cross reference to that particular section is
provided.
For information on navigating through the Applications icons, see
“Navigating Through the Application Menus” on page 30.
1. From the Home screen, tap , then tap one of the
application icons.
2. Follow the on-screen instructions.
3. To return to the Home screen, tap .
The following applications are available:
AllShare:
AllShare allows your phone to stream photos, music and
videos from its memory to other Digital Living Network
Alliance (DLNA) certified devices. Your phone can also play
digital content streamed from other DLNA certified
devices. For more information, refer to “AllShare” on
page 142.
Angry Birds:
Angry Birds is a fun and addictive puzzle game. You must
slingshot birds with various powers, across the screen to
destroy various structures constructed by green pigs, who
just happened to have taken some eggs from the birds. For
more information, refer to “Angry Birds” on page 143.
AT&T Code Scanner:
AT&T Code Scanner allows you to scan 2D (QR and
datamatrix codes) and 1D (UPC and EAN) barcodes found
in magazines, stores, and online. For more information,
refer to “AT&T Code Scanner” on page 143.
21
AT&T FamilyMap:
provides peace of mind by being able to conveniently
locate a family member from your wireless phone or PC
and know that your family's location information is secure
and private. For more information, refer to “AT&T
FamilyMap” on page 144.
AT&T Navigator:
AT&T Navigator provides you with access to real-time
GPS-driven applications. These programs not only allow
you to achieve turn-by-turn navigation, but also access
local searches based on a variety of category parameters.
For more information, refer to “AT&T Navigator” on
page 144.
Calculator:
Using this feature you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication, and division. You can
also use this as a scientific calculator. For more
information, refer to “Calculator” on page 146.
Calendar:
With the Calendar feature, you can consult the calendar by
day, week, or month, create events, and set an alarm to act
as a reminder, if necessary. For more information, refer to
“Calendar” on page 146.
Camera:
Use your 5.0 megapixel camera feature to produce
photos in a JPEG format. For more information, refer to
“Camera” on page 79.
Clock:
The Clock application allows you to access alarms, view
the World Clock, set a stopwatch, and use a timer. For more
information, refer to “Clock” on page 148.
Contacts:
You can manage your daily contacts by storing their name
and number in your Address Book. Address Book entries
can be sorted by name, entry, or group. You can also
synchronize your phone Address Book with AT&T Address
Book, the network backup service. For more information,
refer to “Contacts and Your Address Book” on page 60.
Understanding Your Phone 22
Email:
Email enables you to review and create email using AIM®,
AOL®, Yahoo!® Mail, Comcast, Compuserve, Earthlink,
Gmail, HotPOP, Juno, Mac, NetZero, SBC Yahoo! and
several other email services. You can also receive text
message alerts when you receive an important email. For
more information, refer to “Using Email” on page 96. This
icon only displays in the Applications menu when Email
has been removed as a primary shortcut.
Facebook:
Facebook enables you to go directly to your Facebook
account without accessing it through your web browser.
For more information, refer to “Facebook” on page 151.
Gallery:
The Gallery is where you view photos and play back
videos. For photos, you can also perform basic editing
tasks, view a slideshow, set photos as wallpaper or contact
image, and share as a picture message. For more
information, refer to “Gallery” on page 78.
Gmail:
Gmail is a web-based email service. Gmail is configured
when you first set up your phone. Depending on your
synchronization settings, Gmail can automatically
synchronize with your Gmail account on the web. For more
information, refer to “Using Gmail” on page 97.
Google Search:
The Google Search Bar provides you an on-screen
Internet search engine powered by Google™. For more
information, refer to “Google Search Bar” on page 26.
Latitude:
With Google Latitude, you can see the location of all of
your friends on a map or on a list. You can also share or hide
your location. For more information, refer to “Latitude” on
page 152.
Live TV:
Live TV is a subscription service that allows you to watch
your favorite TV shows using your handset. For more
information, refer to “Live TV” on page 77.
23
Maps:
Depending on your location, you can view basic, custom,
and satellite maps and local business information,
including locations, contact information, and driving
directions. You can also post public messages about a
location and track your friends. For more information, refer
to “Maps” on page 154.
Market:
Android Market provides access to downloadable
applications and games to install on your phone. Android
Market also allows you to provide feedback and comments
about an application, or flag an application that might be
incompatible with your phone. For more information, refer
to “Market” on page 156.
Media Hub:
Samsung Media Hub is your one stop for the hottest movie
and TV content. You can rent or purchase your favorite
content and watch from the convenience of anywhere. For
more information, refer to “Media Hub” on page 73.
Memo:
This feature allows you to create a memo. For more
information, refer to “Memo” on page 156.
Messaging:
You can send and receive different types of messages. For
more information, refer to “Messaging” on page 91.
Mini Diary:
The Mini Diary allows you to keep a diary of your daily
activities and also attach pictures. You can publish your
diary entries to Facebook and MySpace. For more
information, refer to “Mini Diary” on page 157.
Music Player:
Music Player allows you to play music files that you have
stored on your microSD card. You can also create playlists.
For more information, refer to “Music Player” on page 74.
My Files:
My Files allows you to manage your sounds, images,
videos, bluetooth files, Android files, and other memory
card data in one convenient location. For more
information, refer to “My Files” on page 158.
Understanding Your Phone 24
myAT&T:
MyAT&T allows you to manage your own AT&T account.
You can review and pay your bill, check minutes and data
usage, upgrade to a new device, or change your rate
plan. For more information, refer to “myAT&T” on
page 158.
Navigation:
Navigation is an internet-connected GPS navigation
system with voice guidance. You can type or speak
your destination. For more information, refer to
“Navigation” on page 159.
News & Weather: Displays current news and weather for
your location. For more information, refer to “News &
Weather” on page 160.
Places:
Places is an application that uses Google Maps and your
location to help you find Restaurants, Coffee, Bars,
Hotels, Attractions, ATMs, and Gas Stations. You can also
add your own locations. For more information, refer to
“Places” on page 160.
Now is the time for all good
men to come to the aid of their
country. The quick brown fox
jumps over the lazy dog.
Quickoffice:
The Quickoffice application allows you to create and
save Microsoft Word and Excel documents. You can
also view existing Powerpoint presentations and PDFs.
For more information, refer to “Quickoffice” on
page 161.
Settings:
This icon navigates to the sound and phone settings for
your phone. It includes such settings as: display, security,
memory, and any extra settings associated with your
phone. For more information, refer to “Changing Your
Settings” on page 100.
Talk:
Google Talk is a free Windows and web-based application
for instant messaging offered by Google. Conversation
logs are automatically saved to a Chats area in your Gmail
account. For more information, refer to “Google Talk” on
page 99.
25
Task Manager:
The Task Manager application provides information about
the processes and programs running on your tablet, as
well as the memory status. It can also be used to terminate
processes and applications. For more information, refer to
“Task Manager” on page 162.
Video Player:
The Video Player application plays video files stored on
your microSD card. For more information, refer to “Video
Player” on page 77.
Voice Recorder:
The Voice Recorder allows you to record an audio file up to
one minute long and then immediately send it as a
message. For more information, refer to “Voice Recorder”
on page 162.
Voice Search:
The Voice Search feature is a voice-activated application
that allows you to tell the phone what to search for and then
the phone activates a Google search based on what you
said. For more information, refer to “Voice Search” on
page 163.
Web:
Open the web browser to start surfing the web. The
browser is fully optimized and comes with advanced
functionality to enhance the Internet browsing feature on
your phone. For more information, refer to “Web” on
page 126. This icon only displays in the Applications
menu when Web has been removed as a primary shortcut.
Write and Go:
You can use Write and go to jot down an idea first and later
decide on a format such as SMS/ MMS, email, calendar or
memo. For more information, refer to “Write and Go” on
page 164.
YouTube:
YouTube is a video sharing website on which users can
upload and share videos, and view them in MPEG-4 format.
For more information, refer to “YouTube” on page 164.
Understanding Your Phone 26
Tip: To open applications quickly, add the icons of frequently-used
applications to the Home screen or to the folders you created. For
details, see “Customizing Your Home Screen” on page 31.
Google Search Bar
The Google Search Bar provides you an on-screen Internet
search engine powered by Google™.
1. From the main home screen, tap the Google Search bar
.
2. Use the on-screen keypad to enter the item you want to
search for, then tap Go.
3. Tap to narrow your search results. Tap All, Web, Apps
or Contacts to only search in those areas.
4. Tap to use Google Voice Search. For more
information, refer to “Voice Search” on page 163.
Social Updates
This application allows you to have social updates from
Facebook, MySpace, and Twitter displayed on your phone.
1. From the main Home screen, sweep the screen to display
the next Home screen to the left. The Social Updates
screen is displayed.
2. Tap on the Tap here to add account field.
YPmobile:
The Yellowpages Mobile application provides quick and
ready access to businesses, map locations, and storage of
your favorite searches. This application allows you to tap
into local businesses, locations, and events, connecting
you to your search in real-time. For more information, refer
to “YPmobile” on page 164.
27
3. Tap the Auto refresh field. This option allows you to set
how often your social networks are updated. Choose None,
Every 1 hour, Every 4 hours, Every 8 hours, or Once a day.
4. Select the Social networks that you would like to have
added to your Social Updates. Select Facebook, MySpace,
and/or Twitter.
5. You must first sign in to the social networks that you would
like to have social updates displayed on your phone. At the
Sign in prompt, tap OK.
6. Enter Email and Password and tap Log in.
7. The Social Updates screen will be updated with the latest
social updates from your social networks.
8. Tap in the top right corner of the screen to
automatically refresh your social networking feeds and
content.
9. Tap to display the following settings:
• Auto refresh: this option allows you to set how often your social
networks are updated. Choose None, Every 1 hour, Every 4 hours,
Every 8 hours, or Once a day.
• Select service: allows you to select or make changes in your
service options. Tap Facebook, Myspace, and/or Twitter to add or
remove a checkmark.
Buddies Now
The Buddies now application allows you to keep your contact and
social network favorites on a circular roledex-like display. If your
contacts are sync’ed with your social network applications, the
information and pictures will be updated on Buddies now
whenever your contacts update their information. You can
comment on their status or call them with one touch.
1. Press to activate the Home screen.
2. Navigate to the desired empty Home screen.
3. Touch and hold on an empty area of the screen.
4. From the Add to Home screen window tap Widgets.
Understanding Your Phone 28
5. Tap Buddies now. The Buddies now screen will be
displayed on the selected Home screen.
Adding Buddies
1. Tap the add symbol ( ) as shown in the above diagram.
2. Tap a contact from the Contact list to add to the Buddies
now list.
The contact will appear in your Buddies now list.
3. To add more contacts, sweep the roladex display up or
down until the add symbol is displayed again. Repeat
steps 1 and 2.
Using Buddies now
1. Tap in the top right corner of the Buddies now screen
to automatically refresh your social networking feeds and
content.
2. Sweep the roladex display until the desired Buddy
appears.
3. Tap Message to send a message to you contact's social
networking application.
4. Tap Call to call the contact.
5. Tap the contact photo or image to display the contact’s
information.
Removing Buddies
To change or remove a contact from the Buddies now list:
1. Tap Edit on the Buddies Now screen.
2. Scroll to the Buddy you want to delete and tap Remove.
3. To remove a Buddy and replace with another, tap Change
and then select another contact from the Contact list.
4. Tap Done when you are finished.
29
Menu Navigation
You can tailor the phone’s range of functions to fit your needs
using both menus and widgets. Menus, sub-menus, and features
can be accessed by scrolling through the available on-screen
menus. Your phone originally has seven home screens.
Locking and Unlocking the Phone
To unlock your phone:
1. Press the lock button located on the upper right
side of your phone.
2. The main home screen will display with Phone locked
displayed at the bottom of the screen.
3. Sweep the touch screen in any direction.
4. The Home screen will display as shown above.
Home Screen Overview
The main home screen is the starting point for many applications
and functions, and it allows you to add items like application
icons, shortcuts, folders, or Google widgets to give you instant
access to information and applications. This is the default page
and accessible from any menu by pressing .
Navigating Through the Home Screens
Your phone originally has seven home screens. If you like, you
can place different applications on each of the home screens.
 From the main Home screen, sweep the screen with your
finger in either direction. The main Home Screen is located
in the middle with three Home screens on each side.
Understanding Your Phone 30
Navigating Through the Application Menus
There are three Application Menus available. Follow these steps
to navigate through the Application Menus:
1. At the Home screen, tap . The first Application Menu
will be displayed.
2. Sweep the screen to access the other two menus.
3. Tap one of the application icons.
Navigating Using Sub-Menus
Sub-menus are available when you are at any Home screen or
have selected a feature or application such as Phone, Contacts,
Messaging, or Web.
To access a sub-menu:
1. Press .
A sub-menu will appear at the bottom of the phone screen.
2. Tap an option.
Accessing Recently-Used Applications
1. Press and hold from any screen to open the
recently-used applications window.
2. Tap an icon to open the selected application.
Sub-Menu items
31
Customizing Your Home Screen
You can customize your Home screen by doing the following:
• Creating Shortcuts
• Adding and Removing Widgets on the Home Screen
• Repositioning Widgets
• Creating Folders
• Changing the Wallpaper
• Adding and Deleting Home Screens
Creating Shortcuts
Shortcuts are different than the current Home screen Widgets
that only launch an application. Shortcuts activate a feature,
action, or launch an application.
Note: To move a shortcut from one screen to another, it must first be deleted
from its current screen. Navigate to the new screen, then add the
shortcut.
Adding a shortcut from the Applications Menu
1. Press to activate the Home screen.
2. Navigate to the desired Home Page.
3. Tap to display your current applications.
4. Scroll through the list and locate your desired application.
5. Touch and hold the on-screen icon. This creates an
immediate shortcut of the selected icon and closes the
Applications tab. The new shortcut then appears to hover
over the Home screen.
6. While still holding the on-screen icon, position it on the
current page. Once complete, release the screen to lock
the new shortcut into its new position on the current
screen.
Adding a shortcut via the Add to Home screen
1. Press to activate the Home screen.
2. Touch and hold on an empty area of the Home screen.
3. From the Add to Home screen window tap Shortcuts.
4. Tap a selection from the available list:
• Applications
• Bookmark
• Contact
• Direct dial
• Direct message
• Directions & Navigation
• Email (only displays after you create an email account)
Understanding Your Phone 32
• Gmail label
• Latitude
• Settings
5. Follow the on-screen instructions to add the new shortcut
to your current Home screen.
Deleting a shortcut
1. Press to activate the Home screen.
2. Touch and hold the desired shortcut. This unlocks it from
its location on the current screen.
3. Drag the icon over the Delete tab and release it.
As you place the shortcut into the Trash, both items turn
red.
Note: This action does not delete the application, it just removes the shortcut
from the current screen.
Adding and Removing Primary Shortcuts
You can change any of your primary shortcuts with the exception
of the Applications and Home shortcuts.
1. Press to activate the Home screen.
2. Tap to display your current applications.
3. Press and tap View type.
4. Tap Customizable grid. A green circle will appear next to
the option.
5. Press and tap Edit.
6. Scroll through the list and locate your desired application.
7. Touch and hold the on-screen icon, then drag it over the
primary shortcut that you want to replace. The new
primary shortcut then appears at the bottom of the screen.
The old primary shortcut will return to the menu.
8. Press and tap Save.
9. Press to return to the Home screen.
The new primary shortcut will now appear on all Home
screens.
Note: When a primary shortcut is removed, it will then appear as an option in
the Application menu.
33
Adding and Removing Widgets
Widgets are self-contained applications that reside in either your
Applications tab or on the main or extended Home screens.
Unlike a shortcut, the Widget appears as an on-screen
application.
Note: To move a Widget from one screen to another, it must first be deleted
from its current screen. Activate the new screen, then add the Widget.
Adding a Widget
1. Press to activate the Home screen.
2. Navigate to the desired Home Page.
3. Touch and hold on an empty area of the screen.
4. From the Add to Home screen window tap Widgets.
5. Tap an available Widget to place it on your current screen.
Choices include Buddies now, Calendar, Days, Dual clock,
Facebook, Google Search, Latitude, Market, News &
Weather, Picture frame, Power control, Program Monitor,
Social Updates, and YouTube.
Removing a Widget
1. Touch and hold a Widget until you can move it around on
the screen.
2. Drag the Widget over the Delete tab and release it.
As you place the Widget into the Trash, both items turn red.
Note: This action does not actually delete the Widget, it just removes it from
the current Home screen.
Moving Icons in the Applications Menu
1. Press to activate the Home screen.
2. Tap to display your current applications.
3. Press and tap View type.
4. Tap Customizable grid. A green circle will appear next to
the option.
5. Press and tap Edit.
6. Scroll through the list and locate the icon you wish to
move.
7. Touch and drag the icon to the position that you want. To
move to a different page, drag the icon to the edge of the
page until the page scrolls to the desired page.
Understanding Your Phone 34
8. Press and tap Save to save your changes, or tap
Cancel to exit without saving your changes.
9. Press to return to the Home screen.
Creating and Managing Folders
Folders are located on any of the seven available Home screens
and can contain both files (such as data and images) and Contact
information or entries.
To create a folder on-screen follow these steps:
1. Press to activate the Home screen.
2. Navigate to the desired Home Page.
3. Touch and hold on an empty area of the screen.
4. From the Add to Home screen window tap Folders.
5. Tap an available folder type to place it on your current
screen.
• Choices include New folder, All contacts, Contacts with phone
numbers, Facebook Phonebook, Received list from Bluetooth, and
Starred contacts.
Note: Starred contacts are those Contact entries tagged as very important.
Changing the Wallpaper
You can change the Wallpaper (background) of your home
screens by following these steps:
1. Press to activate the Home screen.
2. Touch and hold on an empty area of the screen.
3. From the Add to Home screen window tap Wallpapers.
4. Tap one of the following options:
• Gallery: select a wallpaper from photographs you have taken with
your camera or from other graphics you have stored in your Gallery.
• Live wallpapers: select an animated wallpaper.
• Wallpaper gallery: select from many still-life wallpapers.
5. Select a wallpaper and tap the Save or Set wallpaper icon.
Moving Home Screens
Your phone comes with seven Home screens. You can arrange
the screens in any order that you want.
To move a Home screen, follow these steps:
1. Press to activate the Home screen.
2. Press and tap Edit.
35
3. Touch and hold the Home screen you want to move.
4. Drag it to the location that you would like to place it.
In the following example, the second Home screen is
moved to the last position.
When you move a Home screen, the other Home screens
will be re-ordered automatically.
5. Press to return to the main Home screen.
Adding and Deleting Home Screens
You can delete Home screens and then add Home screens later if
you want.
To delete a Home screen, follow these steps:
1. Press to activate the Home screen.
2. Press and tap Edit.
3. Touch and hold the Home screen you want to delete.
Understanding Your Phone 36
4. Drag it to the trash can located at the bottom of the screen.
5. If there are items on the Home screen that you want to
delete, the This page has items, remove? prompt is
displayed.
6. Tap OK to remove the page, otherwise, tap Cancel.
7. Press to return to the main Home screen.
To add a Home screen, follow these steps:
1. Press to activate the Home screen.
2. Press and tap Edit.
3. Tap the Home screen that contains and a new screen
will appear. Drag it to the location you want.
4. Press to return to the main Home screen.
You can now add items to your new Home screen.
37
Notification Bar
The Notification Bar includes a pull-down list to show information
about processes that are running, recent notifications, and alerts.
To display the Status indicator:
 On the Home screen, touch and hold the Notification Bar
until the pull-down displays, then drag down vertically.
Clearing Notifications
To clear all notifications from the Notification panel:
1. From the Home screen, touch and hold the Notification Bar
until the pull-down displays, then drag down vertically.
2. Tap the Clear button.
The notifications are cleared and the panel closes.
Memory Card
Your device lets you use a microSD™ (SD) or microSDHC™ card
to expand available memory space. This secure digital card
enables you to exchange images, music, and data between
SD-compatible devices. This section addresses the features and
options of your device’s SD functionality. The device has a USB
SD card mode.
Clear Button
Understanding Your Phone 38
SD Card Overview
After mounting an SD card in the device you can use your
computer to access and manage the SD card.
Important!: If access to the external SD card is not available, download and
install the USB drivers.
Mounting the SD Card
To store photos, music, videos, and other applications. You must
mount (install) the SD card prior to use. Mounting the SD card
establishes a USB connection with your computer.
Important!: You must disable USB storage to mount the SD card.
To mount the SD card:
1. Insert the SD card into the external, SD card slot. For more
information, refer to “Removing and Installing the Memory
Card” on page 6.
2. Your SD card is scanned to see the available information
on it.
Unmounting the SD card
Unmounting the SD card prevents corruption and damage to the
SD card while removing it from the slot.
1. From the Home screen, tap ➔ Settings ➔ SD card and
phone storage.
2. Tap Unmount SD card.
3. At the Unmount SD card prompt, tap OK.
4. Open the phone and remove the SD card. For more
information, refer to “Removing and Installing the Memory
Card” on page 6.
SD card Available Memory Status
To view the memory allocation for your external SD card:
1. From the Home screen, tap ➔ Settings ➔ SD card
and phone storage.
2. The available memory displays under the Total space and
Available space headings.
39
Erasing Files from the SD card
You can erase files from the SD card using the phone.
1. Ensure the SD card is mounted. For more information,
refer to “Mounting the SD Card” on page 38.
2. From the Home screen, tap ➔ Settings ➔ SD card and
phone storage.
3. Tap Unmount SD card.
4. At the Unmount SD card prompt, tap OK.
5. Tap Format SD card.
6. At the Format SD Card confirmation prompt, tap Format SD
Card.
Warning!: Performing the next step erases all data stored on the SD card.
7. Tap Erase everything to format or press to cancel.
Call Functions 40
Section 3: Call Functions
This section describes how to make or answer a call. It also
includes the features and functionality associated with making or
answering a call.
For more information, refer to “Call Settings” on page 106.
Displaying Your Phone Number
 Tap ➔ Settings ➔ About phone ➔ Status. Your phone
number is displayed in the Phone number field.
Making a Call
1. From the Home screen, tap and use the on-screen
keypad to enter the number you wish to dial.
• If you make a mistake, tap until the desired numbers have
been deleted.
2. Tap to make the call.
Note: When you activate the Auto redial option in the Voice Call menu, the
phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone. For more information,
refer to “Call Settings” on page 106.
Making an International Call
1. From the Home screen, tap , then touch and hold
. The + character appears.
2. Use the on-screen keypad to enter the country code, area
code, and phone number.
3. Tap to make the call.
Manual Pause Dialing
To manually call a number with pause(s) without storing it in your
Contacts list:
1. From the Home screen, tap and use the on-screen
keypad to enter the phone number.
2. Press to display the dialer sub-menu.
3. Tap Add 3 sec pause to add a three-second pause, and use
the keypad to enter the additional numbers.
Tip: You can create pauses longer than three seconds by entering multiple
3 sec pauses.
41
4. Tap Add wait to add a wait. A wait will pause the calling
sequence until you enter a number or press a key.
5. Tap to make the call.
For more information, refer to “Adding Pauses to Contact
Numbers” on page 63.
Correcting an Entered Number
Use the following steps to correct a mis-typed entry when
dialing.
 After entering a number using the keypad:
• If you make a mistake, tap to erase a single character.
• Press and hold to erase the entire string of numbers.
Ending a Call
 Tap the key.
Dialing a Recent Number
All incoming, outgoing and missed calls are recorded in the Call
log. If the number or caller is listed in your Address Book, the
associated name also displayed.
1. From the Home screen, tap .
2. Tap Logs.
A list of recent calls is displayed.
3. Select the Contact to enter the Details page, then tap
.
Making a Call Using Speed Dial
You can assign a short cut number to a phone number in your
Contacts List for speed dialing.
1. Tap to display your Contacts List.
2. Press to display the Contacts List sub-menu.
3. Tap More ➔ Speed dial.
4. The Speed dial screen displays showing the numbers 1
through 9. The number 1 is reserved for Voicemail.
5. Tap an unused number and the Contacts screen displays.
6. Select a contact to assign to the number. The selected
contact number will display in the speed dial number box.
7. To remove a speed dial number or change the order, press
to display the Speed Dial sub-menu.
8. Tap Change order or Remove.
9. To make a call using Speed Dial, tap and from the
Dialer, touch and hold the speed dial number.
Call
Call Functions 42
Making a Call from the Address Book
You can store phone numbers that you use regularly on the SIM
card or in the phone’s memory. These entries are collectively
called the Address Book.
For further details about the Address Book feature, see “Finding
an Address Book Entry” on page 64.
Answering a Call
When a call is received the phone rings and displays the caller’s
phone number, or name if stored in the Address Book.
1. At the incoming call screen:
• Touch and slide to the right to answer the call.
• Touch and slide to the left to reject the call and send it to
your voicemail.
• Touch and slide the Reject call with message tab upward and tap
a predefined text message to send to the caller.
– I’m driving
– Call me back in x min
– I’m in class now
– I’m in a meeting
– Sorry, I’ll call later
– or –
– Tap Create new message to compose a new message.
2. Tap to end the call.
Note: You can answer a call while using the Address Book or other menu
feature. After ending the call, the phone returns to the previously active
function screen.
43
Dialing Options
From the Home screen and Application menus, you have the
option to access the Dialer and initiate a call by tapping .
When you manually enter numbers from the Dialer, you will see
four dialing options displayed on the screen.
• Keypad: dials the current number entered using the on-screen
keypad.
• Logs: displays a list of all dialed, received, and missed calls.
• Favorites: displays your contacts that you have marked as Favorites.
Also displays frequently called numbers.
• Contacts: takes you to your Address Book where you can select a
contact to call.
After you begin to enter numbers, the Add to Contacts option
appears so you can save the Contact if needed.
Prefix Dialing
When activated, this feature automatically prepends a string of
numbers (such as an area code) to any dialed number. This
feature is useful for international dialing, or dialing within an area
code where all the calls you make for a period of time use one
prefix.
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ All calls ➔ Prefix dialing.
2. Tap the Enable prefix dialing field. A green checkmark will
appear next to the field.
3. Tap Prefix dialing list.The list will be empty until you add a
prefix.
4. Tap Create.
5. Enter a prefix number (for example, 214) using the keypad
and tap Save.
6. The prefix will appear in the Prefix dialing list.
7. Tap the white circle icon next to the prefix to activate it.
The icon will turn green.
Now, whenever you dial a number, the prefix that you
activated will be automatically placed in front of the
numbers that you dial.
8. To change prefixes, just tap another prefix in the Prefix
dialing list and the icon next to it will turn green.
9. To delete a prefix, press then tap Delete. Then tap all
of the prefixes that you wish to delete and tap Delete.
Call Functions 44
Call Log
The phone stores the numbers of the calls you’ve dialed,
received, or missed in the Call log. The Call log displays the
details of the call.
1. From the Home screen, tap .
2. Tap Logs.
A list of recent calls is displayed. If the number or caller is
listed in your Address Book, the associated name is
displayed.
All calls made, received, and missed are listed. Types of calls are
identified by the following icons:
• Incoming Calls:
• Outgoing Calls:
• Missed Calls:
Viewing Missed Calls from the Home Screen
The number of calls you have missed is displayed on the Home
screen.
1. Tap the puzzle piece with the number of missed calls on it
and move it to the area where the piece is missing.
Note: If there is a voicemail sent by the same number, associated icons are
displayed and can then be selected.
2. The Call log is displayed. Missed calls are identified by the
icon next to the number.
45
Calling Back a Missed Call
To call back a missed call number:
1. From the Home screen, tap ➔ Logs.
A list of recent calls is displayed. If the number or caller is
listed in your Address Book, the associated name is
displayed.
2. Tap the desired missed call.
3. Tap Call.
Saving a Recent Call to your Address Book
1. From the Home screen, tap ➔ Logs.
A list of recent calls is displayed.
2. Tap the call you want to save to your Address Book.
3. The call detail page is displayed. Tap Add to Contacts to
add the call to your Address Book.
The Contacts screen is displayed.
4. If you want to replace the number for an existing contact,
tap on the contact name.
– or –
If this is a new contact, tap .
5. Enter information into the various fields using the keypad.
6. Tap Save when you are finished.
Save to
Call the number
Send a message
Contacts
Call Functions 46
Note: By default, your contacts are automatically saved to your phone. To
change where your contacts are saved to, from the main Contacts
screen, press ➔ More ➔ Settings ➔ Save new contacts to.
Select Always ask, Phone, SIM, or Account.
For further details about the Address Book feature, see “Adding
a New Contact” on page 61.
Sending a Message to a Recent Call
1. From the Home screen, tap ➔ Logs.
A list of recent calls is displayed.
2. Tap the call you want to send a message to.
3. The call detail page is displayed. Tap Send message.
– or –
From the Call log, touch and hold the call you want to send
a message to, then tap Send message.
4. At the “Create” screen, tap the empty text field and use the
on-screen keypad to type in a message.
5. To add additional recipients, tap the recipients field at the
top of the screen. Insert new recipients by:
• Pressing the recipients field and then entering the number
manually. Insert a semi-colon between multiple recipients.
• Selecting from Recent to choose your recipient from recent calls.
• Select an entry from your Contacts list.
• Selecting members of a Group.
6. When you are done with your message, tap Send.
For more information, refer to “Creating and Sending Messages”
on page 91.
Deleting a Call from the Call Log
1. From the Home screen, tap ➔ Logs.
A list of recent calls is displayed.
2. Touch and hold the call you want to delete from the Call
log.
3. Tap Delete.
The call is deleted from the Call log.
Adding a Call to the Reject List
1. From the Home screen, tap ➔ Logs.
A list of recent calls is displayed.
2. Touch and hold the call you want to add to the Reject List.
3. Tap Add to reject list.
47
Future calls from this number will be rejected and sent to
your voicemail.
Call Duration
1. From the Home screen, tap .
2. Tap Logs.
3. Press to display the Call log sub-menu.
4. Tap Call duration.
5. The following times are displayed for Voice and Data:
• Last call: shows the length of time for the last call.
• Dialed calls: shows the total length of time for all calls made.
• Received calls: shows the total length of time for all calls received.
• All calls: shows the total length of time for all calls made and
received.
6. You may reset these times to zero by pressing
then tapping Reset.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Adjusting the Call Volume
During a call, to adjust the earpiece volume, use the Volume keys
on the left side of the phone.
 Press the Up volume key to increase the volume level and
press the Down volume key to decrease the volume level.
From the Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
• Hold: place the current active call on hold.
• Add call: displays the dialer so you can call another person.
• Dialpad: displays the on-screen keypad, where you can enter
number using DTMF (Dual Tone Multi-Frequency).
• End call: terminates the call.
• Speaker: routes the phone’s audio through either the speaker or
through the earpiece.
– Tap Speaker to route the audio through the speaker. (You can adjust
the speaker volume using the volume keys.) A green line will appear
under the Speaker button.
– Tap Speaker again to use the phone’s earpiece (see “Using the
Speakerphone During an Active Call” on page 49.) The green line
will turn grey when Speaker is not activated.
Call Functions 48
• Headset: connects to a Bluetooth headset.
– Tap Headset during a call to activate a Bluetooth headset. A green line
will appear under the Headset button.
– Tap Headset again to de-activate the Bluetooth headset. The green line
will turn grey when the Headset is not activated.
• Mute/Unmute: turns the onboard microphone either on or off.
– Tap Mute during a call to mute the microphone. A green line will
appear under the Mute button.
– Tap Mute again to unmute the microphone. The green line will turn
grey when Mute is not activated.
• Press for more options:
– Contacts: allows you to go to your Contact list.
– Memo: allows you to jot down a memo during a call.
– Noise Reduction On/Off: allows you to turn on the Noise Reduction
feature when you are in a noisy area. Turn it Off when not needed to
conserve battery power.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have a
call in progress if your network supports this service.
1. While on a call, tap Hold . This action places the
current caller on hold (which is displayed on-screen as a
greyed-out box).
2. You can later reactivate this call by tapping Resume.
To make a new call while you have a call in progress
1. Tap Hold .
2. Tap Add call to display the dialer.
3. Enter the new number and tap .
Once connected, the active call will appear in a green box
and the call on hold will appear in a gray box.
Switching Between Calls
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.
1. Tap Swap.
The current call (caller #2) is placed on hold and the
previous call on hold (caller #1) is then reactivated so that
you can continue conversing with that person. The active
call will appear in a green box.
2. Tap to end the currently active call.
49
To end a specific call
1. Tap Swap until the call you want to end appears in a green
box.
2. Tap to end the specific call.
3. Tap to end the remaining call.
Using the Speakerphone During an Active Call
While in an active call, it is possible to enable the speakerphone
feature.
1. Tap Speaker .
The Speaker button now appears as and the
speakerphone is activated.
2. Use the Volume keys (located on the left side of your
phone) to adjust the volume.
3. To deactivate the speakerphone, tap Speaker .
Important!: For more information, see “Responsible Listening” on page 179.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.
Example: You wish to say something to person in the room, but do not want
the person on the phone to hear you.
To mute your phone during a call
1. Tap Mute . The option is then replaced with
Unmute.
The Mute button now appears as and Mute is
activated.
2. Tap Mute to deactivate the Mute function and
reactivate the microphone.
Mute
Mute
Mute
Call Functions 50
Bluetooth headset
1. Tap Headset .
2. The phone will scan for your Bluetooth headset. When
found, connect to the headset.
The Headset button now appears as and the
Bluetooth headset is activated.
3. Tap Headset to deactivate the Bluetooth headset
and reactivate the phone speaker.
Searching for a Number in Address Book
1. During the active call, press then tap Contacts
2. Tap the Address Book entry.
For further details about the Address Book feature, see “Finding
an Address Book Entry” on page 64.
Call Waiting
The Call Waiting feature allows you to answer an incoming call
while you have a call in progress, if this service is supported by
the network, and you must first activate the Call Waiting feature:
 Tap ➔ Settings ➔ Call settings ➔ Voice call ➔
Call waiting.
You are notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress
1. Tap and slide to the right to answer another call.
The first call is automatically put on hold.
2. To switch between the two calls, tap Swap.
• Swap: Places the current call on hold and then activates the
previous call. The active call will appear in a green box. Tap Swap
again to switch back.
To end a call on hold
1. Tap to disconnect the active call.
2. The call on hold, will now become the active call. Tap
to end the call.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of
incoming calls and place them on hold. If this service is
supported by the network, all calls can be joined together. You
are notified of an incoming call by a call waiting tone.
Note: The Join option combines all of the calls you have established with
your phone (both active and on hold).
Swap places the current call on hold and then activates the previous
call.
Headset
Headset
Headset
51
This feature joins all of the calls you have established with your
phone (both active and on hold) into a multi-party call.
1. Tap and slide to the right to answer the call.
2. Tap and slide to the right to answer the next call.
The first call is put on hold.
3. Join the first two callers into a single multi-party call by
tapping Join.
4. To disconnect one of the callers, press then tap
Manage Conference Call.
All calls on the conference call will be displayed.
5. Tap next to the call you want to disconnect.
6. Tap Back to call to return to the call screen.
7. Tap to end the call.
Entering Text 52
Section 4: Entering Text
This section describes how to select the desired text input
method when entering characters into your phone. This section
also describes the predictive text entry system that reduces the
amount of key strokes associated with entering text.
Your phone comes equipped with an orientation detector that can
tell if the phone is being held in an upright (Portrait) or sideways
(Landscape) orientation. This is useful when entering text.
Your phone not only provides several on-screen keypad text entry
options, but also provides handwriting recognition to make the
task of text entry that much easier.
Text Input Methods
There are three text input methods available:
• Swype: a new way to enter text on touch screens. Instead of
tapping each key, use your finger to trace over each letter of a
word.
• Android keyboard: an on-screen QWERTY keypad that can be
used in both portrait and landscape orientation.
• Samsung keyboard (default): Samsung’s on-screen QWERTY
keypad that can be used in both portrait and landscape
orientation.
To change the input method, see “Select input method” on
page 119.
Entering Text Using the Samsung QWERTY
Keypad
From a screen where you can enter text, rotate your phone
counterclockwise to a Landscape orientation. The on-screen
QWERTY keypad will display.
New
Paragraph
Text Input Mode
Keypad Settings
Shift
Key
Delete
Key
Space Bar
Voice to Text
53
Changing the Text Input Mode - Keypad
There are two main keypad layout keys that will change the onscreen keys within the QWERTY keypad.
The available Text Input modes are: Sym and ABC.
Note: When in ABC mode, the Sym button will appear. When in Sym mode,
the Abc/ABC/abc button will appear.
Using Abc Mode
1. If desired, rotate your phone counterclockwise to a
Landscape orientation.
2. The following screen displays:
3. Tap the desired alphabetic characters.
4. The screen initially opens in Abc mode. After typing the
first letter, the shift key ( ) will change to and
following letters will be lowercase.
5. Tap to input another upper-case letter or press and
hold to switch to ABC mode. The shift key will
change to in ABC mode. All following letters will be
uppercase until you tap the shift key again.
Symbol/Numeric Mode: activates the number,
symbol, and emoticon keys.
ABC Mode: activates the default alphabet keys. Can
also be set to ABC or abc by using the shift ( ) key.
?123
ABC
Entering Text 54
Using Symbol/Numeric Mode
Use Symbol/Numeric Mode to add numbers, symbols, or
emoticons.
1. Rotate your phone counterclockwise to a Landscape
orientation.
2. Tap at the bottom of the screen. The following screen
displays:
3. Tap the desired number, symbol, or emoticon characters.
4. Tap the button to cycle through additional pages.
5. Tap to return to Abc mode.
Using XT9 Predictive Text
XT9 is a predictive text system that has next-letter prediction and
regional error correction, which compensates for users pressing
the wrong keys on QWERTY keyboards. XT9 is the default setting.
1. Begin typing a word. A list of word options is displayed.
Tap one of the words to replace the word that has already
been typed or tap for more word choices.
2. Continue typing your message. Tap Send to send the
message or press for more options. For more
information, refer to “Creating and Sending Messages” on
page 91.
Note: You can also use XT9 mode in the portrait orientation.
?123
1/3
ABC
55
3. Tap the XT9 advanced settings field to modify XT9
associated settings. For more information, refer to
“Samsung Keyboard settings” on page 121.
Entering Text Using the Android Keyboard
The Android keyboard is an on-screen QWERTY keyboard similar
to the Samsung keyboard with several minor differences.
1. From the Home screen, tap Applications ➔ Settings
➔ Locale and text ➔ Select input method.
2. Tap the Android keyboard option. A green circle should
appear next to Android keyboard.
For information on changing Android Keyboard settings, see
“Android Keyboard settings” on page 120.
Entering Text Using Swype
Swype™ is a text input method that allows you to enter a word by
sliding your finger or stylus from letter to letter, lifting your finger
between words. Swype uses error correcting algorithms and a
language model to predict the next word. Swype also includes a
tapping predictive text system.
Enabling and Configuring Swype
The Samsung keypad is the default text input method, so to use
Swype, you must first change the default keyboard setting.
To enable Swype:
1. From the Home screen, tap Applications ➔ Settings
➔ Locale and text ➔ Select input method.
2. Tap the Swype option. A green circle should appear next to
Swype.
3. Press to return to the previous menu.
Swype Settings
To configure Swype settings:
1. From the Home screen, tap Applications ➔ Settings
➔ Locale and text ➔ Swype.
2. Tap one of the following Swype settings to activate the
setting:
Preferences
• Language: allows you to select the current text input language.
Default language is US English.
• Word prediction: uses a built-in word database to predict words
while entering text in Swype.
Entering Text 56
• Audio feedback: turns on sounds generated by the Swype
application.
• Vibrate on keypress: activates a vibration sensation as you enter
text using the keypad.
• Enable tip indicator: turns on an on-screen flashing indicator that
provides helpful user information.
Swype Advanced Settings
• Auto-spacing: automatically inserts a space between words.
When you finish a word, just lift your finger or stylus and start the
next word.
• Auto-capitalization: automatically capitalizes the first letter of a
sentence.
• Show complete trace: displays the complete trace as you swipe
across the screen.
• Word choice window: sets the amount of times the word choice
selection window displays on screen. Move the slider between
Never or Always and tap OK.
• Speed vs. accuracy: sets how quickly Swype responds to
onscreen input. Move the slider between Fast Response (speed) or
Error Tolerance (accuracy) and tap OK.
Help
• Swype help: displays Swype Help information.
• Tutorial: provides an on-screen tutorial.
About
• Version: provides the current software version for the Swype
application.
Swype Text Entry Tips
You can access the SwypeTips application and watch a video or
tutorial on using Swype. You can also use the following Swype
text entry tips.
• Create a squiggle (like an S shape) to create a double letter (such as pp
in apple).
• Touch and hold a key to view the punctuation menu then make a
selection.
• Move your finger or stylus over the apostrophe to enter contractions.
• Double-tap on the word you want to change to correct a misspelled
word, then tap the delete key to erase one character. Touch and hold
the delete key to erase an entire word.
57
Using the Handwriting Feature
You can enter text simply by using your finger to handwrite letters
on your screen.
To use the Handwriting feature, you must be in Samsung Keypad
mode. To change the input method, see “Select input method” on
page 119.
1. From a screen where you can enter text, hold the phone in
the portrait orientation and tap ➔ Portrait keypad
types.
2. Tap one of the following Handwriting options:
• Handwriting box 1: allows you to write on the lower half of the
screen. The screen is divided into four sections.
• Handwriting box 2: allows you to write on the lower half of the
screen. The screen is not divided.
3. Use your finger tip to write out each character.
Note: To properly recognize the written characters and to prevent scratching
of the LCD, do not use script.
Handwriting area
Keypad settings
Text input mode
Delete key
Line return
Send key
Space key
Entering Text 58
After writing each character, suggestions will be offered in case
the correct letter was not recognized.
Handwriting Tips
• For uppercase letters, write the letter larger than the lowercase letters.
• Write a dash (horizontal line) to add a space.
• To change from letters to numbers, tap .
• To change from numbers to symbols, tap .
Handwriting Settings
1. To change your Handwriting settings, tap , then tap on
Handwriting settings.
2. The following settings can be changed:
– Recognition time: is the time your phone takes to recognize each
character. The longer the time, the more accurate the reading will be.
– About: describes the version, date, and manufacturer of the
handwriting software.
3. Press twice to return to your message.
Using the Voice to Text Feature
You can use your voice to enter text using the Voice to Text
feature.
1. From any messaging screen, tap .
2. At the Speak now prompt, speak clearly and distinctly into
the microphone.
3. Working... is displayed while the software is converting
your voice to text.
4. The text is displayed in the message.
character suggestions
123
?#+
59
5. To add punctuation, speak the name of the punctuation
mark. For example, if you wanted to write “How are you
today?”, you would speak, “How are you today question
mark”.
Note: The feature works best when you break your message down into
smaller segments.
Contacts and Your Address Book 60
Section 5: Contacts and Your Address Book
This section allows you to manage your daily contacts by storing
their name and number in your Address Book. Address Book
entries can be sorted by name, entry, or group.
You can also synchronize your phone Address Book with AT&T
Address Book, the network backup service.
Now, managing and keeping your contacts safe and accessible
has never been easier!
Note: When storing an Address Book entry into your SIM card, note that only
the name, phone number, group, and slot location are initially offered
as fields (some SIM cards may allow an address as well). Although you
may add additional fields to a SIM entry; if you move that same SIM
card to another model phone, it is possible that only the basic
information will be transferred.
AT&T Address Book Activation
Upon activation of AT&T Address Book, the network backup
service, contacts are automatically backed up to your online
AT&T Address Book whenever you add, change, or delete a
contact on your phone. If you ever upgrade, damage, or lose your
phone, you can easily restore your contacts onto your new
phone.
To activate the AT&T Address Book, follow these steps (you only
have to do this once):
1. From the main Home screen, tap Contacts .
Note: The main Home screen initially contains the Contacts icon. If you
delete it, or if you want to access Contacts from another Home screen,
you must tap Applications ➔ Contacts . You can tap
➔ Contacts to access Contacts from the Dialer.
2. Tap Start Sync to begin your AT&T Address Book backup.
3. Tap the Terms and Conditions link and read carefully.
4. Tap Accept to continue or Decline to cancel.
5. At the Do you want to import the contacts from SIM prompt,
press Yes if you have contacts on your SIM card and you
would like to add them to your address book. Otherwise,
tap No.
6. Tap OK.
7. Tap OK again.
Your Address Book is displayed.
Contacts
61
Your AT&T Address Book is Ready to Use. You can now make a
call or send a message through your Address Book.
You can also manage your Address Book on the web
at http://www.att.com/addressbook.
Adding a New Contact
Use the following procedure to add a new contact to your
Address Book.
Saving a Number from the Home screen
1. From the main Home screen, tap Contacts ➔ .
Note: When adding contacts to your SIM, only Name, Phone number, and
Email address fields are displayed. The following steps describe adding
a new contact entry to your phone.
2. Tap the image icon and assign a picture to the new entry
by choosing one of three options:
• Album to retrieve a previously stored image from your Pictures
folder and assign it to this entry. Tap an image to assign the image
to the contact, then tap Save.
• Take photo to use the camera to take a new picture and assign it to
this entry.
• Remove icon although not an option with a new entry, deletes any
previously assigned image on an existing contact.
3. Tap the First name and Last name fields and use the onscreen keypad to enter names for each entry. For more
information, refer to “Entering Text” on page 52.
4. Tap next to the Last name field to display additional
name fields.
5. Tap the Phone number field.
The numerical keypad is displayed.
The Mobile button initially displays next to the
Phone number field. If you want to add a phone number
that is not a mobile number, tap the Mobile button and
select from Mobile, Home, Work, Work fax, Home Fax,
Pager, Other, Custom (add your own label), or Callback.
6. Enter the phone number.
Tap to add another Phone number field or tap to
delete a field.
7. Tap the Email address field.
The keypad is displayed.
Mobile
Contacts and Your Address Book 62
The Work button initially displays next to the Email
address field. If you want to add an Email address that is
not a Work email address, tap the Work button and select
from Work, Home, Mobile, Other, or Custom (add your own
label).
8. Enter the Email address.
Tap to add another Email address field or tap to
delete a field.
9. Tap the Instant msg field.
The QWERTY keypad is displayed.
The Google Talk button initially displays next to the
Instant msg field. If you want to add an instant message
address that is not Google Talk, tap the Google Talk button
and select from Google Talk, AIM, Windows Live, Yahoo,
Skype, QQ, ICQ, Jabber, or Custom (add your own label).
10. Enter the Instant msg address.
Tap to add another Instant msg address field or tap
to delete a field.
11. Tap any of the following fields that you want to add to your
new contact:
• Groups: assign the contact to Family, Friends, or Work group.
• Ringtone: adds a field used to assign a message tone that will
sound when messages are received from this contact. Choose
between Default ringtone, Sound, or Phone ringtone.
• Postal address: adds a field used to assign a physical
postal address for this entry.
• Organization: adds an organization field for this entry.
• More: Tap to add the following fields:
– Notes: adds a field that allows you to jot down notes.
– Nickname: adds a field that can be used to enter a nickname for the
entry. The NickName is not displayed when calls are made to or
received from the contact.
– Website: adds a field for the contact’s Web site URL.
– Birthday: adds a field for the contact’s birthday.
– Anniversary: adds a field for the contact’s anniversary.
12. Tap Save to save the new contact.
Note: By default, your contacts are automatically saved to your phone. To
change where your contacts are saved to, from the main Contacts
screen, press ➔ More ➔ Settings ➔ Save new contacts to.
Select Always ask, Phone, SIM, or Account.
Work
Google Talk
63
Adding Pauses to Contact Numbers
When you call automated systems, you are often required to
enter a password or account number. Instead of manually
entering the numbers each time, you can store the numbers in
your Contacts along with special characters called pauses and
waits. A pause will stop the calling sequence for two seconds
and a wait will pause the calling sequence until you enter a
number or press a key.
To add a pause or a wait to a Contact:
1. From the main Home screen, tap Contacts , and then
tap the name or number to open the Contact.
2. Press ➔ Edit.
3. Tap the phone number field.
4. Tap the screen at the position where the pause or wait
needs to be added.
5. Tap .
6. Tap Pause to add a two-second pause or tap Wait to add a
wait, and use the keypad to enter the additional numbers.
A pause will be displayed as a comma (,) and a wait will be
displayed as a semi-colon (;).
Note: If more than a two-second pause is required, Pause as many times as
needed to add additional two-second pauses.
7. Tap Save to store your changes.
Editing an Existing Contact
When editing an existing contact, you can tap a field and change
or delete the information, or you can add additional fields to the
contact’s list of information.
1. From the main Home screen, tap Contacts then tap
the Contact that you want to edit.
2. Press ➔ Edit.
3. Tap to add a new field and tap to delete a field.
4. Tap any of the following fields to add, change, or delete
information:
• Mobile: adds a Mobile number field for the entry.
• Email: adds an Email address field for the entry.
• IM: adds an IM address field for Google Talk, AIM, Windows Live,
Yahoo, Skype, QQ, ICQ, or Jabber. Tap Custom to create your own
IM label.
• Groups: assign the contact to Family, Friends, or Work group.
?#+
Contacts and Your Address Book 64
• Ringtone: adds a field used to assign a message tone that will
sound when messages are received from this contact. Choose
between Default ringtone, Sound, or Phone Ringtone.
• Postal address: adds a field used to assign a physical
postal address for this entry.
• Organization: adds an organization field for this entry.
• More: Tap to add the following fields:
– Notes: adds a field that allows you to jot down notes.
– Nickname: adds a field that can be used to enter a nickname for the
entry. The Nickname is not displayed when calls are made to or received
from the contact.
– Website: adds a field for the contact’s Web site URL.
– Birthday: adds a field for the contact’s birthday.
– Anniversary: adds a field for the contact’s anniversary.
5. Tap Save to save the edited information.
Using Contacts
Dialing or Messaging from Address Book
Once you have stored phone numbers in the Address Book, you
can dial them easily and quickly by either using their SIM card
location number or by using the Search field to locate the entry.
From the Address book, you can also send messages.
Finding an Address Book Entry
You can store phone numbers and their corresponding names
onto your SIM card and phone’s onboard memory. The two
locations are physically separate but are used as a single entity,
called the Address Book.
Depending on your particular SIM card, the maximum number of
phone numbers the SIM card can store and how they are stored
may differ.
1. From the main Home screen, tap Contacts .
2. Within the Contacts list (sorted alphabetically), tap a letter
on the right side of the display to quickly jump to the
contacts beginning with that letter.
65
3. Tap the contact you wish to call or message.
4. Tap to make a phone call or tap to send a
message.
For more information, refer to “Creating and Sending
Messages” on page 91.
Tip: From the Contact list, sweep right over a listing to make a call. Sweep
left over a listing to send a message.
Joining Contacts
Joining Contact Information
Many people now maintain multiple email accounts, social
networking logins, and other similar account information. For
example, a Facebook account login name might differ from a
corporate email account login because they are maintained
separately and for different groups of people.
This device can synchronize with multiple accounts such as
Facebook, Twitter, MySpace, Corporate email, and Google. When
you synchronize your phone with these accounts, each account
creates a separate contact entry in the Contacts list.
If one of your contacts (Amy Smith, for example) has a regular
email account that you maintain in Gmail, but also has a
Facebook account under her maiden and married name, as well
as a Yahoo! chat account, when you merge these accounts into
your Contacts list you can join all of her entries and view the
information in one record.
The next time you synchronize your phone with your accounts,
any updates that contacts make to email account names, email
addresses, etc. automatically update in your contacts list.
For more information about synchronizing accounts, see
“Synchronizing Accounts” on page 67.
Contacts and Your Address Book 66
1. From the main Home screen, tap Contacts .
2. Tap a contact name (the name you want to join to another
entry).
Note: Typically this is the same contact with a different name or account
information.
3. Press ➔ Join contact.
4. Tap the second contact entry (the entry in which to join).
The second contact is now joined with the first and the
account information is merged into one screen.
Note: The information is still maintained in both entries, but displays in one
record for easier viewing when you join the contacts.
5. Tap the joined contacts to view the contact information you
joined. The contacts and information displays with an icon
next to the contact name to indicate what type of account
information is contained in the entry.
Unjoining a Contact
1. From the main Home screen, tap Contacts .
2. Tap a contact name (the account name from which you
want to unlink an entry).
3. Tap the Joined contacts bar at the bottom of the display.
4. Tap the minus sign next to the entry that you want to
unjoin. The contact is now unjoined and no longer displays
in the merged record screen.
Marking a Contact as Default
When you use messaging type applications, the application
needs to know which information is primary (default) in a contact
entry list. For example, you may have three different contact
records for John Smith, so the application will be looking for the
“default” number or entry.
1. From the main Home screen, tap Contacts .
2. Tap a Contact name.
3. Press ➔ Mark as default. The Mark as default screen
displays radio buttons next to the contact names or phone
numbers of all the linked contacts. The radio button next to
the default contact will be green.
67
Note: Only contacts that have been created on the phone can be marked as
default. The Mark as default option will not display on contacts
imported from your SIM card.
4. To change the default contact, tap the radio button next to
another entry that you want to be the default. The radio
button will turn green, then tap Save.
Synchronizing Accounts
From the Accounts menu you decide if you want applications to
synchronize, send, and receive data at any given time, or if you
want the applications to synchronize automatically. After
determining how you want the accounts to synchronize, indicate
which account to synchronize with your Contacts list.
1. From the main Home screen, tap Contacts .
2. Press then tap Accounts. Your profile auto-generated
name and number displays.
3. Determine which type of account information you want to
synchronize with your Contact list. Selections are:
• Background data: applications that sync, send, and receive data
any time.
• Auto-sync: allows applications to automatically synchronize.
4. Tap Add account.
5. Tap an account type to add.
6. Follow the on-screen instructions. The selected account
type synchronizes with your Contacts list.
Address Book Options
You can access Address Book options while at the main Address
Book page or while in the details page for a specific entry.
Options in Address Book
1. From the main Home screen, tap Contacts then press
.
2. The following options display:
• Delete: allows you to delete 1 or more of your contacts.
• My profile: allows you to set up a profile for yourself. The
information will be the same that you can add for a new contact.
For more information, refer to “Adding a New Contact” on
page 61.
• Import/Export: allows you to move contacts to or from your
memory card. You can also send a namecard via Bluetooth, Email,
Gmail, or Messaging.
• Get friends: allows you to get contacts from your friends on
Facebook, Twitter, or MySpace. You can also get contacts from
Corporate or Google accounts. Tap Add account and then follow
the on-screen instructions. For more information, refer to
“Synchronizing Accounts” on page 67.
Contacts and Your Address Book 68
• Accounts: allows you to add and manage mobile accounts on
Facebook, Twitter, or MySpace. You can also add Corporate or
Google accounts. Tap Add account and then follow the on-screen
instructions.
• More: the following additional options are displayed:
– Speed dial: allows you to set up speed-dialing. For more information,
refer to “Making a Call Using Speed Dial” on page 41.
– Send email: allows you to send an email using your Google account.
– Send message: allows you to send a text or picture message.
– SIM Management: allows you to copy contacts from your phone to
your SIM card or from your SIM card to your phone.
– Display options: You can choose to only display contacts that have
phone numbers, sort by first or last name, display contacts first name
first or last name first, display contacts stored to your SIM card, display
contacts stored on your phone, and/or display contacts stored to other
accounts. Tap a selection and tap Done.
– Settings: allows you to choose where to save your new contacts,
display or edit your own numbers, display or edit your service numbers,
or access the AT&T Address Book.
Options at Selected Contact Screen
1. From the main Home screen, tap Contacts .
2. Touch and hold a contact.
– or –
Tap a contact and at the contact’s display screen, press
.
3. The following options display depending on whether your
contact is saved to your phone or your SIM card:
• Edit: allows you to edit the selected contact’s information.
• Delete: allows you to delete the contact from your Address Book.
• Join contact: allows you to join contacts with other contacts (only
displays when contact is saved to SIM).
• Send contact information: allows you to send a contacts
information in a message.
• Add to favorites: allows you to add the contact to your favorites list.
This option only displays when you press and hold the contact as
described in step 2.
• Add to group: allows you to add the contact to a pre-defined group
such as Family, Friends, or Work. For more information, refer to
“Adding an Entry to a Group” on page 69.
• Mark as default: when you have multiple contacts linked together,
you can mark one of them as default (only displays when contact is
saved to the phone). For more information, refer to “Marking a
Contact as Default” on page 66.
• Send namecard via: allows you to send the contact’s information
via Bluetooth, Email, Gmail, or Messaging.
69
Groups
Creating New Group
1. From the main Home screen, tap Contacts ➔ Groups
➔ ➔ Create.
2. Tap the Group name field and use the on-screen keypad to
enter a new group name. For more information, refer to
“Entering Text” on page 52.
3. Tap Ringtone to choose an audio file for assignment to this
new group. Choose from Default ringtone, Sound, or Phone
ringtone categories.
• Tap a music file to play a short sample and then tap OK to complete
the assignment.
4. Tap Save to store the new Group category.
Adding an Entry to a Group
1. From the main Home screen, tap Contacts ➔ Groups
.
2. Tap a group entry.
3. Press ➔ Add member.
4. Tap all of the contacts you want to add to this group.
A green checkmark will appear next to their name.
5. Tap Add.
The contacts are now added to the group.
Removing an Entry From a Group
1. From the main Home screen, tap Contacts ➔ Groups
.
2. Tap a group entry.
3. Press ➔ Remove member.
4. Tap all of the contacts you want to remove from this group.
A green checkmark will appear next to their name.
5. Tap Remove.
The contacts are now removed from the group.
Editing a Caller Group
To edit a Group entry, there must be at least one member as part
of the selected group.
1. From the main Home screen, tap Contacts ➔ Groups
.
2. Tap a group entry.
3. Press ➔ Edit group.
Groups
Groups
Groups
Groups
Contacts and Your Address Book 70
4. Make modifications to the Group Name or Ringtone fields.
For more information, refer to “Creating New Group” on
page 69.
5. Tap Save to store your changes.
History
The history option allows you to see the calls, messages, and
emails that have been sent to and received from your contacts.
1. From the main Home screen, tap Contacts ➔ History
.
A call and message history for your contacts is displayed.
2. Press . The following options are available:
• Delete: allows you to delete calls or messages from your History.
Select a call or message and tap Delete.
• View by: allows you to select what type of calls, messages, or
emails that are displayed. You can choose Call, Message, Email,
IM, Facebook, MySpace, Twitter, or Select all. Tap the items you
want to see displayed then tap Done.
Activities
The Activities option allows you to view updated contact
information that were synchronized with Facebook, MySpace, or
Twitter.
1. From the main Home screen, tap Contacts ➔
Activities .
Note: You must log in to an SNS account (Facebook, MySpace, or Twitter)
before you can view the updates.
2. The updates are displayed.
Note: Activity updates will not appear unless you have synchronized your
phone with your accounts. For more information, refer to
“Synchronizing Accounts” on page 67.
Address Book Favorites
Once you have stored phone numbers in the Address Book, you
can add them to your Favorites list.
Adding Favorites to your Address Book
1. From the main Home screen, tap Contacts .
2. Within the Contacts list, touch and hold a contact that you
want to add to your favorites list.
History
Activities
71
3. Tap Add to favorites on the displayed list.
4. A star will appear next to the contact in the Address Book.
Removing Favorites from your Address Book
1. From the main Home screen, tap Contacts .
2. Within the Contacts list, touch and hold a contact that you
want to remove from your favorites list.
3. Tap Remove from favorites on the displayed list.
4. The star will no longer appear next to the contact in the
Address Book.
Managing Address Book Entries
You can copy, delete, and view the memory status for the Phone
and SIM entries on your phone.
Copying an Entry to the SIM Card
Note: When storing an Address Book entry into the SIM card, note that only
the name, phone number, group, and slot location are initially offered
as fields (some SIM cards may allow an address as well). To save
additional information for a particular contact, such as other phone
numbers, or e-mail, it is important to add new fields to that Contact
information. It is also important to note that if you move the SIM card to
another phone that does not support additional fields on the SIM card,
this additional information may not be available.
1. From the main Home screen, tap Contacts ➔ ➔
More ➔ SIM Management.
2. Tap Copy Contacts to SIM.
The phone then displays a list of your current phone
contacts.
3. Tap the contacts to place a checkmark adjacent to those
entries you wish to have copied to the SIM card.
• Repeat this step for all individual entries you wish copied to the SIM
or tap Select all to place a checkmark alongside all entries.
4. Tap Copy.
The selected numbers are copied to the SIM card.
5. At the Copy Successful prompt, tap OK.
Copying an Entry to the Phone
1. From the main Home screen, tap Contacts ➔ ➔
More ➔ SIM Management.
2. Tap Copy Contacts from SIM.
The phone then displays a list of your current contacts
stored on your SIM card.
Contacts and Your Address Book 72
3. Tap the contacts to place a checkmark adjacent to those
entries you wish to have copied to your phone.
• Repeat this step for all individual entries you wish copied to your
phone or tap Select all to place a checkmark alongside all entries.
4. Tap Copy.
The selected numbers are copied to your phone.
Deleting Address Book Entries
You can delete Phone or SIM entries from your phone’s memory.
1. From the main Home screen, tap Contacts .
2. Within the Contacts list, touch and hold a contact that you
want to delete.
3. Tap Delete on the displayed list.
4. At the This contact will be deleted prompt, tap OK to delete
the contact or Cancel to exit.
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN) assigned
by your service provider. These numbers may include emergency
numbers, customer service numbers, and directory inquiries.
1. From the main Home screen, tap Contacts ➔ ➔
More ➔ Settings.
2. Tap Service numbers.
3. Scroll through the available numbers.
4. To make a call, tap one of the Service Dialing Numbers.
Note: This menu is available only when your SIM card supports Service
Dialing Numbers.
73
Section 6: Multimedia
This section explains how to use the multimedia features of your
phone, including Media Hub, AT&T Music, Music Player, MobiTV,
AT&T Radio, Mobile Video, Video Player, Gallery, Camera, and
Camcorder.
Media Hub
Samsung Media Hub is your one stop for the hottest movie and
TV content. With hundreds of titles available at your fingertips,
entertaining yourself or your kids on the go has never been
easier. You can rent or purchase your favorite content and watch
from the convenience of anywhere. Featuring the stunning
viewing quality Samsung is known for, Samsung Media Hub is
your gateway to mobile video like you've never experienced it
before.
Note: Media Hub usage is based on service availability.
Using Media Hub
1. Sign on to your Google account. For more information,
refer to “Signing into Your Gmail” on page 97.
2. Tap ➔ Media Hub .
3. Read the End-User License Agreement (EULA) and tap
Accept to continue or Decline to exit.
The Media Hub screen displays.
4. At the Media Hub screen, the following options appear:
• What’s new: shows recently added media that you can rent or
purchase.
• My Media: allows you to view all of the media that you have
purchased or rented. Tap a media entry to view it.
• Movie Store: displays movies that are available for rent or
purchase. Scroll through the top navigation bar and select a movie
category. The movies of that type will be displayed below.
• TV Store: displays TV shows that are available for purchase. Scroll
through the top navigation bar and select a TV category. The TV
shows of that type will be displayed below.
5. Scroll through the media listings and tap on an item you
would like to purchase or rent.
6. Information concerning the media displays. Tap WATCH
PREVIEW to watch a short preview or tap Own or Rent.
7. In order to rent or buy media, you must first create an
account. Use the keypad to enter the required information,
then tap Create Account.
8. Choose a payment method and then follow the on-screen
instructions.
9. The media will now be stored in the My Media folder.
Music Player
The Music Player is an application that can play music files. The
music player supports files with extensions AAC, AAC+, eAAC+,
MP3, WMA, 3GP, MP4, and M4A. Launching the Music Player
allows you to navigate through your music library, play songs,
and create playlists (music files bigger than 300 KB are
displayed).
Playing Music
1. Tap ➔ Music Player .
2. Read the Music Player tips and tap Done when you are
finished. Tap the Do not show again field if you don’t want
to see the tips again.
3. Tap a library category at the top of the screen (All,
Playlists, Albums, Artists, or Genres) to view the available
music files.
4. Scroll through the list of songs and tap an entry to begin
playback.
5. The following Music Player controls are available:
Pause the song.
Start the song after being paused.
Press and hold to rewind the song. Tap to go to
previous song.
Press and hold to fast-forward the song. Tap to go
to next song.
Volume control.
Repeat one: repeats the currently playing song.
Repeat all: replays the current list when the list ends.
Play All: plays the current song list once.
Shuffle On: the current list of songs are randomly
shuffled for playback.
Shuffle Off: songs play in order and are not shuffled.
Displays your list of songs.ListMultimedia 74
75
Note: The 5.1 channel sound effect works in earphone mode only.
Music Player Options
To access additional options, follow these steps:
1. While in the Music Player, press .
2. The follow options are available:
• Add to quick list: adds the current music file to the Quick list.
• Via Bluetooth: scans for devices and pairs with a Bluetooth
headset.
• Share music via: allows you to share your music by using AllShare,
Messaging, Bluetooth, Gmail, or Email.
• Go to disc view: allows you to see your music on a carousel of
diskettes.
• Add to playlist: allows you to add the current music file to a
selected playlist.
• More: allows you to access the following additional options:
– Settings: allows you to change your music player settings. For more
information, refer to “Music Player Settings” on page 75.
– Details: allows you to view media info such as Artist, Title, Album, Track
Length, Genre, Recording date, etc.
Music Player Settings
The Music Player Settings menu allows you to set preferences for
the music player such as whether you want the music to play in
the background, sound effects, and how the music menu
displays.
1. From the Home screen, tap ➔ Music Player .
2. Press ➔ More ➔ Settings.
3. Select one of the following settings:
• Equalizer: set a type of equalization. Selections are: Auto, Normal,
Pop, Rock, Jazz, Dance, Classic, Live, or Custom.
• Effect: configure the music effects. Selections are: Normal, Wide,
Concert Hall, Music clarity, Bass enhancement, or Externalization.
• Music menu: this menu allows you to select which categories you
want to display. Choices are: Albums, Artists, Genres, Folders,
Composers, Years, Most played, Recently played, or Recently
added. Tap each item that you want to display in the Music menu.
• Visualization: when activated the music player displays an
animated display.
Multimedia 76
Using Playlists
Playlists are used to assign songs to a list of preferred media
which can then be grouped into a list for later playback. These
Playlists can be created via either the handset’s Music Player
options menu or from within a 3rd party music application (such
as Windows Media Player) and then downloaded to the handset.
Creating a Playlist
1. From the Home screen, tap ➔ Music Player .
2. Tap the Playlists tab.
3. Press ➔ Create.
4. Type a name for this playlist in the field and tap Save.
Adding Music to a Playlist
To add files to the playlist:
1. From the Home screen, tap ➔ Music Player .
2. Tap the Playlists tab.
3. Tap the playlist name in which to add music.
4. Tap Add music.
5. Tap a music file, or tap Select all to add all the music files
to this playlist then tap Add.
Removing Music from a Playlist
To remove music files from a playlist:
1. From the Home screen, tap ➔ Music Player .
2. Tap the Playlists tab.
3. Tap the playlist name in which to delete music.
4. Press ➔ Remove.
5. Tap the music file you want to remove from this playlist, or
tap Select all to remove all the music files, then tap
Remove.
Editing a Playlist
Besides adding and removing music files in a playlist, you can
also rename the playlist.
To edit a playlist:
1. From the Home screen, tap ➔ Music Player .
2. Tap the Playlists tab.
3. Press ➔ Edit.
4. Tap a playlist name to edit.
5. Tap the Name field for the selected playlist, enter a new
name for the playlist then tap Save.
77
For information on downloading music for your phone, see
“Market” on page 156.
Live TV
Live TV is a subscription service that allows you to watch your
favorite TV shows using your handset.
1. Tap ➔ Live TV .
Note: The first time you use Live TV, you will need to download the
application from the Market. For more information, refer to “Market”
on page 156.
2. Read the Terms and Conditions and tap Accept to continue
or Exit to exit.
3. When the Activate Device screen displays, tap Activate.
4. A text message is sent to your device with an activation
link. Go to your inbox and tap on the activation link to
activate your device.
5. The AT&T U-verse Live TV website is displayed.
6. Tap Launch Application.
7. At the Complete action using display, tap Live TV.
8. When the Activation in Progress screen displays, tap
Complete Activation to activate your device.
The Success! screen in displayed.
9. Tap Continue.
Note: Live TV will use a large amount of data and you are responsible for all
data charges. It is strongly recommended that you upgrade to an
unlimited data plan in addition to this purchase.
10. The Live TV main page displays. Follow the on-screen
instructions to watch TV.
Video Player
The Video Player application plays video files stored on your
microSD card.
1. Tap ➔ Video Player .
2. All videos that you have on your memory card will be
displayed. Tap the video that you want to play.
3. The video will begin to play.
4. The following video controls are available:
Pause the video.
Start the video after being paused.
Press and hold to rewind the video. Tap to
go to previous video.
Multimedia 78
Note: The screen view icons are a three-way toggle. The icon that is
displayed, is the mode that will appear after the icon is tapped.
Note: The 5.1 channel sound effect works in earphone mode only.
For more information on downloading videos for your phone, see
“Market” on page 156.
Gallery
The Gallery is where you view photos and play back videos. For
photos, you can also perform basic editing tasks, view a
slideshow, set photos as wallpaper or contact image, and share
as a picture message.
1. Tap ➔ Gallery .
All of the Albums that hold your pictures and videos will be
displayed with folder name and number of files.
2. Tap an Album and thumbnails of the contents will be
displayed.
Note: If your device displays that the memory is full when you access Gallery,
delete some of the files by using My Files or other file management
applications and try again. For more information, refer to “My Files”
on page 158.
Viewing Pictures
1. Tap a thumbnail to view the picture.
Note: If no control icons are displayed on the screen in addition to the
picture, tap anywhere on the screen to display them.
2. Tap Slideshow to see a slideshow of all the pictures in the
folder.
Press and hold to fast-forward the video.
Tap to go to next video.
Volume control.
Original size view. The video will be played in
its original size.
Full-screen in ratio view. The video is enlarged
as much as possible without becoming distorted.
Full-screen view. The entire screen is used,
which may cause some minor distortion.
Allows you to listen to music using 5.1 Virtual
Surround Sound.
5.1Ch
( ( ) )
79
3. Tap Menu for the following options:
• Share: allows you to share the picture via AllShare, Messaging,
Facebook, Bluetooth, Picasa, Email, Gmail, or Online Locker.
• Delete: allows you to delete the picture. Tap Confirm deletions and
the picture will be deleted.
• More: displays the following additional options:
– Details: provides details about the picture such as Title, Type, Date
taken, name of the Album it is in, Latitude and Longitude (GPS
coordinates), Size, and Resolution.
– Set as: allows you to set the picture as Wallpaper or as a Contact icon.
– Crop: allows you to crop the picture. Tap the orange box and move it to
the desired location and tap Save. The area within the orange box will
be the area cropped and will be saved in place of the old picture.
– Rotate left: rotates the picture to the left.
– Rotate right: rotates the picture to the right.
Viewing Videos
Note: If no control icons are displayed on the screen in addition to the
picture, tap anywhere on the screen to display them.
1. Touch and hold a video to select it. A checkmark will
appear on the thumbnail.
2. The following options are available:
• Share: allows you to share the picture via AllShare, Messaging,
YouTube, Email, Bluetooth, Gmail, or Online Locker.
• Delete: allows you to delete the picture. Tap Confirm deletions and
the picture will be deleted.
• More: displays the following additional options:
– Details: provides details about the picture such as Title, Type, Date
taken, name of the Album it is in, Latitude and Longitude (GPS
coordinates), Size, and Resolution.
3. Tap a thumbnail to play the video.
For video player controls, see “Video Player” on page 77.
Camera
This section explains how to use the camera on your phone. You
can take photographs and shoot video by using the built-in
camera functionality. Your 8 megapixel camera produces photos
in JPEG format.
Important!: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with
another person’s privacy.
Multimedia 80
Using the Camera
Taking Photos
Taking pictures with your device’s built-in camera is as simple as
choosing a subject, pointing the camera, then pressing the
camera key.
Note: When taking a photo in direct sunlight or in bright conditions, shadows
may appear on the photo.
1. From the main Home screen, tap Camera to activate
the camera mode.
Note: The main Home screen initially contains the Camera icon. If you
delete it, or if you want to access the camera from another Home
screen, you must tap Applications ➔ Camera .
2. Using the phone’s main display screen as a viewfinder,
adjust the image by aiming the camera at the subject.
3. Before you take a picture, use the Up and Down Volume
keys to zoom in or out. You can magnify the picture up to
x4 (400 percent). You can also pinch the screen inwards to
zoom out and pinch the screen outwards to zoom in.
4. If desired, before taking the photo, you can tap on-screen
icons to access various camera options and settings.
5. You can also tap the screen to move the focus to the area
you touch.
6. Press the Camera key until the shutter sounds. (The
picture is automatically stored within your designated
storage location. If no microSD is installed, all pictures are
stored on the Phone.) For more information, refer to
“Camera Options” on page 81.
Note: The number of JPEG pictures remaining on the selected media appears
in the upper-right of the screen. This is an approximate number of total
pictures that can be taken at the current image size.
Note: To enable the GPS icon, from the Home screen tap Settings ➔ Location
and security and tap Use GPS satellites to create a checkmark.
81
7. While viewing a picture, after you have taken it, tap to
zoom in or to zoom out.
– or –
Tap each side of the picture and swipe outward or inward
to zoom in or out.
You can magnify the picture up to x4.
8. Press to return to the viewfinder.
Camera Options
Options are represented by icons across both sides of the screen.
Note: The options disappear after a few seconds. Tap the screen to make
them reappear.
Display Image Resolution
Settings
Pictures Remaining
Camera
Key
Image
Viewer
Mode
Flash
Self shot
Shooting
Exposure
Value
Mode Camera / Camcorder Mode: allows you to take a photo in
various modes. Once you change the mode, the
corresponding indicator appears at the top left of the
display. Choose from Camera or Camcorder.
Flash: allows you to set the flash options to Off, On, or Auto
flash.
Self shot: allows you to set the front camera so you can take
pictures of yourself or video chat.
Shooting mode: allows you to set the shooting mode.
Options are:
• Single shot: takes a single photo and view it before
returning to the shooting mode.
A
Multimedia 82
• Smile shot: the camera focuses on the face of your
subject. Once the camera detects the person’s smile,
it takes the picture.
• Continuous: takes a succession of consecutive photos
by pressing and holding the Camera key.
• Panorama: takes a landscape photo by taking an
initial photo and then adding additional images to
itself. The guide box lets you view the area where the
second part of the panoramic picture should fall
within.
• Add me: combines people with existing background.
Tap the screen to pick which side of the screen to
focus on. Press the camera key. Focus on a
background and press the camera key a second time.
• Action shot: detects action and creates a panorama of
the moving object.
• Cartoon: gives your photo a cartoon look.
Exposure value: allows you to adjust the brightness level
by moving the slider across the page.
Settings: allows you to customize your camera settings.
Tap the tab for the following options:
• Outdoor visibility: allows you to take better pictures
when outdoors.
• Focus mode: allows you to set this option to Auto
focus, Macro, or Face detection. Use Macro mode to
take close-up pictures. Face detection causes the
camera to automatically recognize if there is a face in
the shot. It then optimizes the focus and exposure the
face. Use Auto focus for all others.
• Scene mode: allows you to set the Scene to help take
the best pictures possible. Options include None,
Portrait, Landscape, Night, Sports, Party/Indoor,
Beach/Snow, Sunset, Dawn, Fall color, Firework, Text,
Candlelight, and Backlight. Helpful tips are shown for
each scene mode at the bottom of the display screen.
• Timer: allows you to set a timer for how long to wait
before taking a picture. Options include: Off, 2 sec, 5
sec, and 10 sec.
83
• Resolution: allows you to set the image size to either:
8M (3264x2448), W7.8M (3264x1968),
5M (2560x1920), W4M (2560x1536),
3.2M (2048x1536), W2.4M (2048x1232),
2M (1600x1200), W1.5M (1600x960),
0.3M (640x480), or W0.4M(800x480).
• White balance: allows you to set this option to one of
the following choices: Auto, Daylight, Cloudy,
Incandescent, or Fluorescent.
• Effects: allows you to change the color tone or apply
special effects to the photo. Options include: Normal,
Negative, Black and White, or Sepia.
• ISO: ISO determines how sensitive the light meter is
on your digital camera. Choose from Auto, 100, 200,
400, or 800. Use a lower ISO number to make your
camera less sensitive to light, a higher ISO number to
take photos with less light, or Auto to let the camera
automatically adjust the ISO for each of your shots.
• Metering: allows you to set how the camera measures
or meters the light source: Center-weighted, Spot, or
Matrix.
• Anti-shake: reduces image blur due to the movement
of the subject of the photo or hand movement.
• Auto contrast: provides a clear image even under
backlight circumstances where intensity of
illumination can vary excessively.
• Blink detection: detects the blinking of human eyes
and give you a warning.
• Image quality: allows you to set the image quality to:
Superfine, Fine, or Normal.
• Adjust: allows you to adjust Contrast, Saturation, and
Sharpness.
Tap the tab for the following options:
• Guidelines: allows you to turn the guidelines On or Off.
• Review: allows you to activate the instant review
feature where images are displayed immediately after
review (On or Off, or 2 seconds for Camera mode).
• GPS: allows you to turn GPS On or Off (also known as
Geotagging). The location of where the picture is
taken is attached to the picture. (Only available in
Camera mode.)
Multimedia 84
Pictures and Videos Image Viewer Options
After you take a photo or shoot a video, you can access various
options from the Pictures and Videos Image Viewer.
Available options are:
• Next Picture or Video: displays the next picture or video.
• Share: offers several ways to share your picture or video. Options are:
AllShare, Bluetooth, Email, Facebook, Gmail, Messaging, Picasa
(picture only), and YouTube (video only).
• Shutter Sound: allows you to set the Shutter sound to
3 different shutter sounds. Or, you can turn it off.
• Storage: allows you to configure the default storage
location for images or videos as either Phone or
Memory card (if inserted).
• Reset: allows you to reset all camera or camcorder
settings.
Image viewer: allows you to access the Image viewer and
the various viewing options for a selected picture. Image
viewer options are described in the following section. The
last picture you took, will be displayed as a thumbmail in
the Image viewer icon.
Share
Zoom in
More
or out
Image or
Video
Set as
Next Picture
or Video
85
• Set as (picture only): allows you to assign the current image as a
Contact icon, your Home screen Wallpaper or as your Lock screen
Wallpaper.
• Play (video only): allows you to play the current video.
• More: allows you to do the following:
– Send to Online Locker: allows you to send your picture or video to
Online Locker.
– Delete: allows you to delete the current picture or video. Tap OK to
delete or Cancel.
• Return to previous page ( ): takes you back to the previously
active camera or camcorder page where you can take another photo
or shoot a new video.
Accessing Pictures
When you take a picture, the file is saved in the Camera folder.
You can view your pictures immediately or view them anytime in
the Camera folder.
1. From the Home screen, tap ➔My Files ➔
DCIM ➔ Camera.
2. Tap a photo file to open it in the Image viewer.
Touch and drag a picture to the left to see the next picture or to
the right to see the previous picture.
Before you select a picture, press in the Camera folder to
see the following options:
• Share: lets you share selected pictures with AllShare, Messaging,
Facebook, Bluetooth, Picasa, Email, Gmail, or Online Locker.
• Create folder: create a new sub-folder in the current folder. Can be on
either the Phone or Memory Card.
• Delete: allows you to delete selected pictures. Tap the checkmark, to turn
it green, next to any file or folder you want to delete, then tap Delete.
• View by: allows you to view the contents of the current folder as a list,
as a list and details, or as thumbnails.
• List by: allows you to view the contents of the current folder sorted by
Time, Type, Name, or Size.
• More: provides you with the additional options: Move, Copy, Rename,
Bluetooth visibility, and Settings.
– Move: allows you to move one or more pictures to a different folder.
– Copy: allows you to copy one or more pictures to a different folder.
– Rename: allows you to rename one or more picture files.
– Bluetooth visibility: allows you to make one or more pictures visible to
Bluetooth devices.
– Settings: lets you set several general folder options:
• Show hidden files: causes files and folders that would normally be
hidden to be displayed.
• Show file extension: causes file extensions to be displayed. For
example, jpg.
• Set home directory: allows you to choose and set the Home
directory.
Multimedia 86
Selecting and Using the Pictures
From the Image viewer, you have access to both macro functions
(zoom, crop, and rotate) and menu options. For more information,
refer to “Pictures and Videos Image Viewer Options” on page 84.
Editing a Photo
1. From the Home screen, tap ➔ My Files ➔ DCIM
➔ Camera ➔ .
2. Tap Menu ➔ More to access the following editing options:
• Crop: allows you to crop the image. Touch and drag the sides of the
crop box to create the crop area, then tap Save. Tap Discard to
stop without cropping the picture.
• Rotate left: allows you to rotate the picture counterclockwise 90
degrees.
• Rotate right: allows you to rotate the picture clockwise 90 degrees.
Assigning an Image to an Address Book Entry
1. From the Home screen, tap ➔ My Files ➔ DCIM
➔ Camera ➔ .
2. Tap Menu ➔ More ➔ Set as ➔ Contact icon. Tap a contact
entry and tap Save.
– or –
Tap Menu ➔ More ➔ Set as ➔ Contact icon ➔ to create
a new Address Book entry with the image already
assigned. For more information, refer to “Contacts and
Your Address Book” on page 60.
Assigning an Image as a Wallpaper
1. From the Home screen, tap ➔ My Files ➔ DCIM
➔ Camera ➔ .
2. Tap Menu ➔ More ➔ Set as.
3. Tap Home screen Wallpaper or Lock screen Wallpaper.
4. Touch and drag the crop box anywhere on the picture.
Touch and drag the sides of the crop box to zoom in or out
to create a cropped area.
5. Tap Save to assign the wallpaper image. Tap Discard to
stop without updating the wallpaper image.
Using the Camcorder
In addition to taking photos, the camera also doubles as a
camcorder that also allows you to record, view, and send videos.
Note: The camera may not be able to properly record videos to a memory
card with a slow transfer speed.
87
Shooting Video
Tip: When shooting video in direct sunlight or in bright conditions, it is
recommended that you provide your subject with sufficient light by
having the light source behind you.
1. From the main Home screen, tap Camera to activate
the camera mode.
2. Tap the Camera mode icon ( ) to switch to Camcorder
mode ( ).
3. Using the phone’s main display screen as a viewfinder,
adjust the image by aiming the camcorder at the subject.
4. Press the Video key ( ) to begin shooting video.
5. Tap to pause the recording or tap to stop the
recording and save the video file to your Camera folder.
6. Once the file has been saved, tap to play your video
for review.
7. Press to return to the viewer.
Camcorder Options
Options are represented by icons across both sides of the screen.
Note: The options disappear after a few seconds. Tap the screen to make
them reappear.
Camera / Camcorder Mode: allows you to take a photo in
various modes. Once you change the mode, the
corresponding indicator appears at the top left of the
display. Choose from Camera or Camcorder.
Recording mode: allows you to set the recording mode to
either: Normal, which is limited only by available space on
the destination location, or Limit for MMS, which is limited
by MMS size restrictions.
Flash: allows you to set the flash options to Off or On.
Exposure value: allows you to adjust the brightness level
by moving the slider across the page.
Resolution: allows you to set the video size to either:
1280x720, 720x480, 640x480, 320x240, or 176x144.
1280
720
Multimedia 88
Settings: allows you to customize your camcorder settings.
Choose from the following options:
Tap the tab for the following options:
• Outdoor visibility: allows you to take better videos
when outdoors.
• Timer: allows you to set a timer for how long to wait
before taking a video. Options include: Off, 2
Seconds, 5 Seconds, and 10 Seconds.
• White balance: allows you to set this option to one of
the following choices: Auto, Daylight, Cloudy,
Incandescent, or Fluorescent.
• Effects: allows you to change the color tone or apply
special effects to the photo. Options include: Normal,
Negative, Black and White, or Sepia.
• Video quality: allows you to set the video quality to:
Superfine, Fine, or Normal.
• Adjust: allows you to adjust Contrast, Saturation, and
Sharpness.
Tap the tab for the following options:
• Guidelines: allows you to turn the guidelines On or Off.
• Audio recording: allows you to record audio while
recording video. Selecting Off, temporarily mutes the
microphone and records only video. (Only available in
Camcorder mode).
• Review: allows you to activate the instant review
feature where videos are displayed immediately they
are taken so you can review them.
• Storage: allows you to configure the default storage
location for videos as either Phone or Memory card (if
inserted).
• Reset: allows you to reset all camcorder settings.
Image viewer: allows you to access the Image viewer and
the various viewing options for a selected video. Image
viewer options are described in the following section. The
last video you took, will be displayed as a thumbmail in the
Image viewer icon.
89
Camcorder Options after a Video is Taken
After you shoot a video, you can access various options from the
Pictures and Videos Image Viewer
 The following options are available:
• Share: offers several ways to share your video. Options are: AllShare,
Bluetooth, Email, Gmail, Messaging, and YouTube.
• Play: allows you to play the video.
• More: allows you to access the following additional options:
– Send to Online Locker: allows you to post your video to the web using
Online Locker.
– Delete: allows you to delete the current video. Tap OK to delete or
Cancel.
Accessing Videos
When you shoot a video, the file is saved in the Camera folder.
You can view your videos immediately or view them anytime in
the Camera folder.
1. From the Home screen, tap ➔ My Files ➔ DCIM
➔ Camera.
2. Tap a video file to open it in the viewer and initiate
playback.
3. To pause the video, tap . To play the video, tap .
Before you select a video to play, press in the Camera folder
to see the following options:
• Share: lets you share the selected videos with AllShare, Messaging,
Facebook, Bluetooth, Picasa, Email, Gmail, or YouTube.
• Create folder: create a new sub-folder in the current folder. Can be on
either the Phone or Memory Card.
• Delete: allows you to delete selected videos. Tap the checkmark, to turn
it green, next to any file or folder you want to delete, then tap Delete.
• View by: allows you to view the contents of the current folder as a list,
as a list and details, or as thumbnails.
• List by: allows you to view the contents of the current folder sorted by
Time, Type, Name, or Size.
• More: provides you with the additional options: Move, Copy, Rename,
Bluetooth visibility, and Settings.
– Move: allows you to move one or more videos to a different folder.
– Copy: allows you to copy one or more videos to a different folder.
– Rename: allows you to rename one or more video files.
– Bluetooth visibility: allows you to make one or more videos visible to
Bluetooth devices.
– Settings: lets you set several general folder options:
• Show hidden files: causes files and folders that would normally be
hidden to be displayed.
• Show file extension: causes file extensions to be displayed. For
example, 3gp.
Multimedia 90
• Set Home Directory: allows you to choose and set the Home
directory.
Once you have selected a video to play, press to display the
following options:
• Share video: to share the current video by way of AllShare,
Messaging, Bluetooth, YouTube, Email, Gmail, or Online Locker.
• Details: displays file information such as File name, Format,
Resolution, File size, Date & Time, and Forwarding.
• Add bookmark: adds this video to the Bookmarks list.
• Bookmarks: display Bookmarks. To remove Bookmarks tap Remove,
tap each Bookmark you want to remove, and tap Done.
• Via Bluetooth: scans for a Bluetooth device on which to play the video.
While viewing a video, you can also adjust the screen view.
Screen view allows you to select Original Size, Full-Screen, or
Full-Screen in Ratio to view your video.
Note: The screen view icons are a three-way toggle. The icon that is
displayed, is the mode that will appear after the icon is tapped.
• Original Size: ( ) the video will be played in its original size.
• Full-Screen in Ratio View: ( ) the video is enlarged as much as
possible without becoming distorted.
• Full-Screen View: ( ) the entire screen is used, which may cause
some minor distortion.
• Pause/Resume: tap to pause the video being played. Tap to
resume playing.
• Previous/Next: tap to jump to the previously played video or tap
to jump to the next video file in the Camera folder.
• Exit: to return to the videos list, tap the icon in the top right
corner of the screen.
91
Section 7: Messaging
This section describes how to send and receive different types of
messages. It also includes the features and functionality
associated with messaging.
Types of Messages
Your phone provides the following message types:
• Text Messages
• Multimedia (Picture, Video, and Audio) Messages
• Email and Gmail Messages
• Google Talk
The Short Message Service (SMS) lets you send and receive text
messages to and from other mobile phones or email addresses.
To use this feature, you may need to subscribe to your service
provider’s message service.
The Multimedia Messaging Service (MMS) lets you send and
receive multimedia messages (such as picture, video, and audio
messages) to and from other mobile phones or email addresses.
To use this feature, you may need to subscribe to your service
provider’s multimedia message service.
Important!: When creating a message, adding an image, a sound file, or a
video clip to a text message changes the message from a text
message to a multimedia message.
Messaging icons are displayed at the top of the screen and
indicate when messages are received and their type. For more
information, refer to “Indicator Icons” on page 18.
Creating and Sending Messages
1. From the main Home screen, tap Messaging ➔
New message.
Note: The main Home screen initially contains the Messaging icon. If you
delete it, or if you want to access Messaging from another Home
screen, you must tap Applications ➔ Messaging .
2. Tap on the To field to manually enter a recipient or tap on
one of the following buttons:
• Recent: to select a recipient from a list of recently sent messages.
• Contacts: to select a recipient from your Contacts list (valid entries
must have a wireless phone number or email address).
• Group: to select a recipient from the Group list.
3. If adding a recipient from Recent, Contacts, or Group, tap
the contact to place a checkmark then tap Add.
The contact will be placed in the recipient field.
Messaging 92
Note: For the Group option, if the number of recipients is less than 10, all
members in the group will be added. You will need to delete any
unnecessary members in the list by selecting the trash can icon and
deleting unwanted entries.
Note: Enter additional recipients by separating each entry with a semicolon
(;) then using the previous procedure.
4. Tap the Type to compose field and use the on-screen
keypad to enter a message. For more information, refer to
“Entering Text” on page 52.
5. Add more recipients by tapping the recipient field.
6. Review your message and tap .
Note: If you exit a message before you send it, it will be automatically saved
as a draft.
Message Options
Options before composing a message
1. From the main Home screen, tap Messaging .
2. Before composing a message, press to reveal
additional messaging options.
• Compose: allows you to compose a new message.
• Delete threads: allows you to delete any message thread. Select
the messages to delete and a green checkmark will appear next to
the message. Tap Delete.
• Search: allows you to search through all of your messages for a
certain word or string of words. Enter a search string in the
Messaging Search window and tap .
• Settings: allows you to access Messaging settings. For more
information, refer to “Messaging Settings” on page 95.
Options while composing a message
1. While composing a message, press to reveal
additional messaging options.
• Add/Remove Cc/Bcc: allows you to copy or blind copy other
numbers. You may manually enter a number or choose from
Recent, Contacts, or Group. You may also delete existing Cc/Bcc
numbers.
• Attach: allows you to attach the following:
– Slideshow: allows you to create up to a 10 page slideshow to
attach to the message.
– Pictures: allows you to tap an existing image from your Pictures list to
add it to your message.
– Videos: allows you to choose an existing video from the Videos list,
then add it to your message.
Send
93
– Audio: allows you to choose an existing audio file from the Audio
list, then add it to your message by tapping the circle to the right of
the audio so that it turns green, then tapping OK.
– Capture picture: allows you to temporarily exit the message, take a
photo with phone’s camera, and then add it to your message by tapping
Save.
– Capture video: allows you to temporarily exit the message, record a
video clip using the phone’s camera, and then add it to your
message by tapping Save.
– Record audio: allows you to temporarily exit the message, record an
audio clip using the phone’s microphone, and then add it to your
message by tapping ➔ Add.
– Contacts: allows you to tap on an existing Address Book entry, then
add it to your message by tapping Select.
– Calendar: allows you to tap on an existing Calendar event, then add
it to your message by tapping Add.
– Memo: allows you to tap on an existing Memo, then add it to your
message by tapping Attach.
• Add text: allows you to copy text from your contacts, calendar, or
from a memo to add to your message. This is a convenient feature
for adding names, phone numbers, events, etc. to your message.
For more information, refer to “Adding Additional Text” on
page 93.
• Insert smiley: allows you to add emoticons, such as a happy face
to your message.
• Discard: allows you to delete the message without saving it to your
Drafts folder.
Adding Additional Text
You can copy text such as names, phone numbers, and events
from your Contacts, Calendar or a Memo.
1. While composing a message, press ➔ Add text.
2. At the Add text screen, select one of the following:
• Contacts: allows you to add the name and phone number of any of
your contacts to your message.
• Calendar: allows you to add the name, date, and time of a calendar
event to your message.
• Memo: allows you to add an entire memo to your message.
3. Tap the information you want to send. This will place a
checkmark next to the item.
4. Tap Add if adding text from Contacts or Calendar and tap
Attach if adding Memo to your message.
The text is added to your message.
Attaching a Namecard to a Message
To attach a Namecard containing the name and number of
another contact, follow these steps:
1. Press ➔ Attach.
2. Tap Contacts.
Messaging 94
3. Select a contact or contacts that you want to attach a
namecard for. This will place a checkmark next to the
contact.
4. Tap Select.
5. A namecard will be added to your message for each
contact selected. Tap if you want to delete the
namecard.
Viewing New Received Messages
1. When you receive a new message, the new message
icon will appear at the top of your screen.
2. Open the Notification Bar and select the message. For
more information, refer to “Notification Bar” on page 37.
– or –
From the main Home screen, tap Messaging then tap
the new message to view it.
The selected message appears in the display.
3. To play a multimedia message, tap .
• To pause playback of the multimedia message, tap .
4. To scroll through the message (if additional text pages
have been added), touch the screen and in a single motion,
scroll up or down the page.
Message Threads
Sent and received text and picture messages are grouped into
message threads. Threaded messages allow you to see all the
messages exchanged (similar to a chat program) and displays a
contact on the screen. Message threads are listed in the order in
which they were received, with the latest message displayed at
the top.
To open a threaded message:
 From the main Home screen, tap Messaging .
Tap the message thread you want to view.
– or –
Touch and hold the message thread to display the
following options:
• View contact: displays the contact’s information. This option only
displays if the sender is in your Contacts list.
• Add to Contacts: displays the Contacts information screen. This
option only displays if the sender is not in your Contacts list.
95
• Delete thread: displays a confirmation dialog box that when
pressed, deletes the entire thread.
Deleting Messages
Deleting a single message
1. From the main Home screen, tap Messaging .
2. Touch and hold a message, then tap Delete thread.
3. At the Delete prompt, tap OK to delete or Cancel to cancel.
Deleting multiple messages
1. From the main Home screen, tap Messaging .
2. Press ➔ Delete threads.
3. Tap each message you want to delete. A checkmark will
appear beside each message you select.
4. Tap Delete.
5. At the Delete prompt, tap OK to delete or Cancel to cancel.
Tap Include locked messages to create a checkmark if you
also want to delete locked messages.
Message Search
You can search through your messages by using the Message
Search feature.
1. From the main Home screen, tap Messaging .
2. Tap ➔ Search.
3. Use the on-screen keypad to enter a word or phrase to
search for, then tap .
4. All messages that contain the search string you entered
are displayed. If no results are found, No matches is
displayed.
Messaging Settings
To configure the settings for text messages, multimedia
messages, Voice mails, and Push messages.
1. From the main Home screen, tap Messaging ➔
➔ Settings.
2. The following Messaging settings are available:
• Delete old messages: deletes old messages when the limit is
reached, rather than having them overwritten.
• Text message limit: allows you to set a limit on how many text
messages can be in one conversation.
Messaging 96
• Multimedia message limit: allows you to set a limit on how many
multimedia messages can be in one conversation.
• Manage SIM card messages: allows you to manage the
messages that you have stored on your SIM card.
• Message center: allows you to enter the number of your message
center where your messages reside while the system is attempting
to deliver them.
• Input mode: allows you to set the input mode for your text
messages. Choose between GSM Alphabet, Unicode, or Automatic.
• Auto-retrieve: allows the message system to retrieve messages
automatically.
• Roaming auto-retrieve: allows the message system to retrieve
messages automatically while you are roaming.
• Creation mode: allows you to select the creation mode, Free,
Restricted, or Warning.
– Restricted: you can only create and submit messages with content
belonging to the Core MM Content Domain.
– Warning: the phone will warn you via pop up messages that you are
creating a multimedia message which does not fit the Core MM Content
Domain.
– Free: you may add any content to the message.
• CB activation: allows you to receive Cell Broadcast (CB) messages.
• Channel configuration: allows you to set up the channel that you
will receive CB messages on.
• Language: allows you to select all of the languages that you want
to receive CB messages in.
• Notifications: allows you to see message notifications on your
status bar.
• Select ringtone: allows you to set the ringtone for your message
notifications.
Using Email
Email enables you to review and create email using AIM®, AOL®,
Yahoo!® Mail, Comcast, Compuserve, Earthlink, Gmail, HotPOP,
Juno, Mac, NetZero, SBC Yahoo!, and several other email
services. You can also receive text message alerts when you
receive an important email.
Signing into Your Email
1. From the Home screen, tap Email .
Your accounts screen displays with an Email setup screen
displayed.
2. Enter you email address in the Email address field.
3. Enter your password in the Password field, then press Next.
4. Enter an Account name for your own identification
(optional) then tap Done.
97
Synchronizing a Corporate Email Account
Use the following procedure to configure your phone to
synchronize with a corporate email account.
1. From the Home screen, tap Email .
The Email setup screen is displayed.
2. Tap the Email address and Password fields and enter the
information.
3. Tap Manual setup.
4. From the Add email account screen, tap Microsoft
Exchange ActiveSync.
5. Enter the Domain\Username, Password, and Exchange
server information.
6. Scroll down and tap Next.
7. At the Activation prompt, tap OK.
The Account options screen is displayed.
8. Set the desired options, then scroll down and tap Next.
9. Enter an Account name for your own identification
(optional) and tap Done.
10. Press ➔ More ➔ Account Settings to change account
settings such as Account Name, Amount to synchronize,
Out of office settings, and other options.
Using Gmail
Gmail is Google’s web-based email. When you first setup the
phone, Gmail is configured. Depending on the synchronization
settings, Gmail is automatically synchronized with your Gmail
account.
Signing into Your Gmail
1. From the Home screen, tap ➔ Gmail .
2. Tap Next.
3. If you have not created a Google account yet, tap Create
and follow the on-screen instructions. For more
information, refer to “Creating a New Google Account” on
page 12.
– or –
If you have a Google account, tap Sign in.
Note: You must sign in to your Gmail account in order to access Gmail.
Messaging 98
4. Follow the on-screen instructions.
The Inbox loads conversations and email.
Refreshing Gmail
 Press ➔ Refresh to send and receive new emails and
synchronize your email with the Gmail account.
Creating a Gmail Message
1. From the Gmail Inbox, press ➔ Compose.
2. Enter the recipients Email address in the To field.
Separate multiple recipient email addresses with a
comma.
3. Tap and select Add Cc/Bcc to add a carbon or blind
copy.
4. Enter the subject of this message in the Subject field.
5. Tap the Compose Mail field and begin composing your
message.
6. Tap to send the email when you are done.
– or –
Tap to save the email as a draft.
Viewing a Gmail Message
1. From the Gmail Inbox, tap a message to view it.
2. The following options are available:
• Archive: archives the selected Email.
• Delete: deletes the Email.
• Next: displays the next Email in your inbox.
• Previous: displays the previous Email in your inbox.
3. Press to select one of the following additional options:
• Change labels: changes the label on the email or conversation.
• Mark unread: unread messages or threads with unread messages
display in boldface text in the Inbox.
• Go to inbox: returns you to your Gmail Inbox.
• Mute: mutes the conversation (Email thread).
• Add/Remove star: click a message's star to add or remove the
star (just like clicking flags in Outlook).
• More:
– Report spam: reports the Email message as spam.
– Select text: allows you to copy text to your clipboard.
– Settings: displays Email settings that you can modify.
– Help: displays the Google.com webpage so you can search the web for
help.
99
Google Talk
Google Talk is a free Windows and web-based application for
instant messaging offered by Google. Conversation logs are
automatically saved to a Chats area in your Gmail account. This
allows you to search a chat log and store them in your Gmail
accounts.
1. From the Home screen, tap ➔ Talk .
2. Press Next to set up a Google account or to Sign in.
3. Tap Create to create a new Google account.
– or –
Tap Sign in if you have an existing Google account.
4. After entering your user name and password, tap Sign in.
Note: After signing into your Google account, the next time you access the
Talk application, steps 2-5 are no longer necessary.
5. Begin using Google Talk.
Note: The Network confirms your login and processes. This could take up to
5 minutes to complete.
Changing Your Settings 100
Section 8: Changing Your Settings
This section explains the sound and phone settings for your
phone. It includes such settings as: display, security, memory,
and any extra settings associated with your phone.
Wireless and Network
Flight mode
Flight mode allows you to use many of your phone’s features,
such as Camera, Games, and more, when you are in an airplane
or in any other area where making or receiving calls or data is
prohibited.
Important!: When your phone is in Airplane Mode, it cannot send or receive
any calls or access online information or applications.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network.
2. Tap Flight mode. A check mark displayed next to the
feature indicates Flight mode is active.
Activating Wi-Fi
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Tap Wi-Fi. A check mark displayed indicates Wi-Fi is
active.
For more information, refer to “Wi-Fi” on page 132.
Network Notification
By default, when Wi-Fi is on, you receive notifications in the
Status bar anytime your phone detects an available Wi-Fi
network. You can deactivate this feature if you do not want to
receive notifications.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Tap Network notification. A check mark displayed next to
the feature indicates Network notification is active.
3. Tap Network notification again to remove the checkmark
and deactivate this feature.
101
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Tap WPS button connection.
3. Press the WPS button on your Wi-Fi access point within 2
minutes.
Mobile AP
You can use your phone as an Internet AP (Access Point) using
Mobile AP. This allows other devices (maximum of 5) to connect
to it via Wi-Fi. The Internet will be available on connected devices
to share your 3G network.
Important!: A Tethering/Mobile Hotspot is required to use this service. Please
go to www.att.com/myWireless or dial 611 if you do not already
have this service provisioned.
To set up Mobile AP, follow these steps:
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Mobile AP.
2. Tap Mobile AP to make a checkmark and activate the
feature.
3. If Wi-Fi is activated, tap Yes to deactivate it.
4. Tap Mobile AP settings to configure the following options:
• Network SSID: the ID number that Identifies your wireless network.
• Security: select Open or WPA2 PSK.
• Password: allows you to set a password for credential storage.
• Hide my device: tap to create a checkmark if you want your device
hidden.
Connecting to Mobile AP from other devices.
1. Activate Wi-Fi on the device that wants to connect to your
phone.
2. Find [AndroidAPxxxx] in the Wi-Fi network list and connect
to it (xxxx are the last four digits of your phone number).
Changing Your Settings 102
The connected device can now use internet with Mobile
AP. The icon will display at the top of your screen.
Note: Activating Wi-Fi and connecting to your phone will be different
depending on the type of device.
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
 From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and tap Bluetooth to turn
it on.
Note: Bluetooth must be enabled prior to use.
Device Name
1. Activate Bluetooth. For more information, refer to “Turning
Bluetooth On and Off” on page 134.
2. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and tap Device name.
The assigned device name displays.
3. Press to erase the current device name and enter a
new name for this device using the keyboard.
4. Press OK to confirm your setting.
Visible
 From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and tap Visible.
The phone is now activated for discovery for 119 seconds
so you can pair with another device. After 119 seconds the
phone becomes invisible again.
Scan Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and tap Scan devices.
Your phone begins scanning and lists any discovered
devices in the Bluetooth devices section.
2. Tap a device name to pair with the device.
103
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required, and
tap OK.
Tethering & portable hotspot
This option allows you to share your phones’s mobile data
connection via USB or as a portable Wi-Fi hotspot.
Important!: A Tethering/Mobile Hotspot is required to use this service. Please
go to www.att.com/myWireless or dial 611 if you do not already
have this service provisioned.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Tethering.
2. Tap USB tethering to add a checkmark and activate the
feature.
VPN settings
The VPN settings menu allows you to set up and manage Virtual
Private Networks (VPNs).
Important!: Before you can use a VPN you must establish and configure one.
Adding a VPN
Before you add a VPN you must determine which VPN protocol to
use: PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2
Tunneling Protocol), L2TP/IPSec PSK (Pre-shared key based
L2TP/IPSec), or L2TP/IPSec CRT (Certificate based L2TP/IPSec).
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ VPN settings.
2. Tap Add VPN.
To establish a PPTP (Point-to-Point Tunneling Protocol):
1. Tap Add PPTP VPN.
2. Tap VPN name, add a name for this connection using the
keypad, then tap OK.
3. Tap Set VPN server, add a name using the keypad, then tap
OK.
4. Tap Enable Encryption to make a checkmark (if desired).
5. Tap DNS search domains, add a name for DNS search using
the keypad, then tap OK.
To establish a L2TP (Layer 2 Tunneling Protocol):
1. Tap Add L2TP VPN.
Changing Your Settings 104
2. Tap VPN name, add a name for this connection using the
keypad, then tap OK.
3. Tap Set VPN server, add a name using the keypad, then tap
OK.
4. Tap Enable L2TP Secret to make a checkmark (if desired).
5. Tap Set L2TP Secret and enter a password (if desired), then
tap OK.
6. Tap DNS search domains, add a name for DNS search using
the keypad, then tap OK.
To establish a L2TP/IPSec PSK (Pre-shared key based L2TP/
IPSec):
1. Tap Add L2TP/IPSec PSK VPN.
2. Tap VPN name, add a name for this connection using the
keypad, then tap OK.
3. Tap Set VPN server, add a name using the keypad, then tap
OK.
4. Tap Set IPsec pre-shared key, enter a key and tap OK.
5. Tap Enable L2TP Secret to make a checkmark (if desired).
6. Tap Set L2TP Secret and enter a password (if desired), then
tap OK.
7. Tap DNS search domains, add a name for DNS search using
the keypad, then tap OK.
To establish a L2TP/IPSec CRT (Certificate based L2TP/
IPSec):
1. Tap Add L2TP/IPSec CRT VPN.
2. Tap VPN name, add a name for this connection using the
keypad, then tap OK.
3. Tap Set VPN server, add a name using the keypad, then tap
OK.
4. Tap Enable L2TP Secret to make a checkmark (if desired).
5. Tap Set L2TP Secret and enter a password (if desired), then
tap OK.
6. Tap Set user certificate, then tap OK.
7. Tap Set CA certificate, then tap OK.
8. Tap DNS search domains, add a name for DNS search using
the keypad, then tap OK.
105
Mobile networks
Before you use applications such as Google Maps and find your
location or search for places of interest, you must enable the
Mobile networks options.
 From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Mobile networks.
The following options display:
Use Packet Data
To activate the data network, this option must be selected. It is
set on by default.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Mobile networks.
2. Tap Use packet data.
Data Roaming
Data roaming allows you to connect to your service provider’s
partner networks and access data services when you are out of
your service providers area of coverage.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Mobile networks.
2. Tap Data roaming.
Access Point Names
To use Wi-Fi you need access to a wireless access point
(hotspot).
 From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Mobile networks ➔ Access Point Names.
A list of the Access Point names display. The active access
point displays a green, filled circle to the right of the name.
Network Operators
Using this feature you can view the current network connection.
You can also scan and select a network operator manually, or set
the network selection to Automatic.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Mobile networks.
2. Tap Network operators.
The current network connection displays at the bottom of
the list.
Important!: You must deactivate data service prior to searching for an
available network.
3. Tap Search networks to manually search for a network.
Changing Your Settings 106
4. Tap Select automatically to automatically select a network
connection.
Note: Connecting to 2G networks slows the data transfer speed and time.
Default setup options
Your phone default is set to Automatic (to automatically search
for an available network. You can set this option to Manual to
select a network each time you connect.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Mobile networks.
2. Tap Network operators.
3. Tap Default setup.
4. Tap Manual to locate and connect to a network manually,
or tap Automatic to allow the device to automatically select
a network.
Call Settings
To access the Call settings menu:
 From the Home screen, tap ➔ Settings ➔ Call
settings.
All calls
Configure the general call settings using this option.
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ All calls.
2. Tap one of the following options:
• Show my number: allows you to select how your ID is handled
when an outgoing call is initiated.
• Auto reject: sets the phone to automatically reject incoming calls.
• Answering call: selects how your phone answers incoming calls.
Enable Answering mode, then select one of the following methods
for answering the phone:
– Answering mode allows you to answer calls.
– Answering key allows you to press the Home key to answer the
phone.
– Automatic answering automatically answers after a period of time.
Selections are: Off, After 1 second, After 2 seconds, After 3 seconds,
After 4 seconds, or After 5seconds. This option is used when using a
Bluetooth headset or earphone.
• Prefix dialing: when activated, this feature automatically prepends
a string of numbers (such as an area code) to any dialed number.
This feature is useful for international dialing, or dialing within an
area code where all the calls you make for a period of time use one
prefix. For more information, refer to “Prefix Dialing” on
page 43.
107
• Reject call with message: allows you to send a message
immediately after rejecting a call.
• Call status tones: sets a tone to play for the following status tones:
Call connect tone or Minute minder. Tap each type of status tone
you want to play.
• Outgoing call vibration: allows the caller’s phone to vibrate when
the called party answers the call.
• Alerts on call: activates an alert tone for new messages being
received during an active call.
Voice call
To configure voice calls:
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ Voice call.
2. Tap one of the following options:
• Call forwarding: incoming calls are re-routed to a secondary
number that you specify.
• Call barring: restricts specific types of incoming and outgoing calls
on your phone.
• Call waiting: this network service informs you when someone is
trying to reach you during another call. Specify individual call
waiting options for voice calls.
• Auto redial: automatically redials the last number if the call was
either cut off or was unable to connect.
• Noise suppression: Your phone is equipped with an advanced
voice processing chip that delivers clear mobile calls by
suppressing background noise, intermittent sounds (like a siren or
nearby conversation), and echoes, allowing you to hear and be
heard nearly anywhere. Tap Noise suppression to activate.
Fixed Dialing Numbers
Fixed Dial Number (FDN), allows you to restrict outgoing calls to a
limited set of phone numbers.
Enabling FDN
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ Fixed Dialing Numbers.
2. Tap Enable FDN.
3. At the prompt, enter your PIN2 code and tap OK.
FDN is enabled.
4. To enable FDN after it has been disabled, tap Disable FDN,
enter your PIN2 code and tap OK.
Important!: Not all SIM cards use a PIN2 code. If your SIM card does not, this
menu does not display.
The PIN2 code is provided by your carrier. Entering an incorrect
PIN2 code could cause the phone to lock. Contact customer
service for assistance.
Changing Your Settings 108
Changing the PIN2 Code
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ Fixed Dialing Numbers.
2. Tap Change PIN2.
3. At the prompt, enter your old PIN2 code.
4. At the prompt, enter a new PIN2 code.
5. Confirm your PIN2 code.
Managing the FDN List
When this feature is enabled, you can make calls only to phone
numbers stored in the FDN list on the SIM card.
Note: Before you can manage an FDN list a list must be created.
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ Fixed Dialing Numbers.
2. Tap FDN list.
3. A list of all existing FDN numbers will be displayed.
Voicemail
You can view or modify your voicemail number from this menu.
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ Voicemail.
2. Tap Voicemail.
3. Tap the Voicemail number field, backspace to erase the
digits, and enter a new voicemail number using the
keypad, then tap OK.
4. Tap OK.
Mode TTY
This menu is used to activate or deactivate Hearing Aid
Compatibility for this device.
1. From the Home screen, tap ➔ Settings ➔ Call settings
➔ Mode TTY.
2. A green checkmark will appear. Tap Mode TTY again to turn
it off.
109
Sound Settings
From this menu you can control the sounds on the phone.
 From the Home screen, tap ➔ Settings ➔ Sound.
The following options display:
Silent mode
Silent mode is convenient when you wish to stop the phone from
making noise, in a theater for example. In Silent Mode the
speaker is muted and the phone only vibrates to notify you of
incoming calls, or other functions that normally have a defined
tone or sound as an alert.
1. From the Home screen, tap ➔ Settings ➔ Sound.
2. Tap Silent mode.
– or –
From the Home screen, press the Lock key until Phone
options displays.
3. Tap Silent mode to activate or deactivate this mode (the
current mode displays).
Vibrate
Vibrate mode allows your tablet to vibrate instead of a tone.
1. From the Home screen, tap ➔ Settings ➔ Sound ➔
Vibrate.
2. Tap Always, Never, Only in silent mode, or Only when not in
silent mode.
Note: The Vibrate setting is independent of other call sound settings. For
example, if you have Silent mode enabled with Phone vibrate, your
phone won’t play a ringtone, but will vibrate for an incoming call.
Incoming Call Volume
There are multiple ways to adjust the ringer volume.
1. From the Home screen, press the Up or Down Volume key.
– or –
From the Home screen, tap ➔ Settings ➔ Sound ➔
Volume.
2. Touch and drag the slider to adjust the sound for the
Incoming call volume and tap OK.
Changing Your Settings 110
Media volume
This sets the volume levels for playing music and videos.
1. From the Home screen, tap ➔ Settings ➔ Sound ➔
Volume.
2. Touch and drag the slider to adjust the sound for the Media
volume and tap OK.
System volume
This sets the volume levels for feedback and also controls sound
when you power the phone on or off.
1. From the Home screen, tap ➔ Settings ➔ Sound ➔
Volume.
2. Touch and drag the slider to adjust the sound for the
System volume and tap OK.
Notification volume
This sets the volume levels for notifications and alarms.
1. From the Home screen, tap ➔ Settings ➔ Sound ➔
Volume.
2. Touch and drag the slider to adjust the sound for the
Notification volume and tap OK.
Phone ringtone
This option allows you to set the ringtone.
1. From the Home screen, tap ➔ Settings ➔ Sound.
2. Tap Phone ringtone.
3. Tap a ringtone and tap OK.
Notification ringtone
This option allows you to set the ringtone that will sound for
notifications and alarms.
1. From the Home screen, tap ➔ Settings ➔ Sound.
2. Tap Notification ringtone.
3. Tap a ringtone and tap OK.
Audible Tone Settings
The Audible touch tones and Audible selection options are used
when you use the dialing pad, make a screen selection, or lock
your screen. Each time you press a key, make a selection, or lock
your phone, the selected tone sounds.
1. From the Home screen, tap ➔ Settings ➔ Sound.
2. Tap Audible touch tones, Audible selection, or Screen lock
sounds. A check mark displayed next to these features
indicates active status.
111
Haptic feedback and Vibration intensity
Instead of sounding a tone, the Haptic feedback option vibrates
when you press soft keys on certain screens. You can also set the
intensity of the vibration using the Vibration intensity setting.
1. From the Home screen, tap ➔ Settings ➔ Sound.
2. Tap Haptic feedback. A check mark displayed next to the
feature indicates Haptic feedback is active.
3. Tap Vibration intensity then touch and drag the slider to
adjust the vibration intensity, then tap OK.
Display Settings
In this menu, you can change various settings for the display
such as the font, orientation, pop-up notifications, puzzle lock
feature, animation, brightness, screen timeout, power saving
mode, and tv out settings.
 From the Home screen, tap ➔ Settings ➔ Display.
The following options display:
• Wallpapers: sets the home screen and lock screen wallpapers.
• Font style: sets the fonts used on the LCD display. The default font,
is the only font that comes with your phone. Tap Get fonts online to
download additional fonts.
• Brightness: configures the LCD Brightness levels. Tap Automatic
brightness to allow the phone to self-adjust and tap OK.
• Auto-rotate screen: allows you to switch the display orientation
automatically when you rotate the phone.
• Animation: determines whether some or all of the window
elements animate. Selections are: No animation, Some animations,
and All animations.
• Screen timeout: adjusts the delay time before the screen
automatically turns off. Selections are: 15 seconds, 30 seconds, 1
minute, 2 minutes, and 10 minutes.
• Power saving mode: This mode allows you to save power because
the phone analyzes the displayed screen image and adjusts the
LCD brightness.
Location and Security
The Location and Security settings allow you to set up how the
phone will determine your location and the security settings for
your phone.
Use wireless networks
Before you use applications such as Google Maps and find your
location or search for places of interest, you must enable the Use
wireless networks option or enable the GPS satellites.
1. From the Home screen, tap ➔ Settings ➔ Location
and security.
Changing Your Settings 112
2. Tap Use wireless networks to enable location information
using the wireless network.
Use GPS satellites
This option allows you to locate locations accurately to street
level. To conserve power, deselect this option when not in use.
1. From the Home screen, tap ➔ Settings ➔ Location
and security.
2. Tap Use GPS satellites to enable the GPS satellite.
Use sensor aiding
This option enhances the GPS pedestrian positioning capabilities
of your phone and conserves battery power using sensors.
Note: When indoors or underground, the sensors work best if you align your
phone with the direction of your movement.
1. From the Home screen, tap ➔ Settings ➔ Location
and security.
2. Tap Use sensor aiding to enable the positioning sensors.
3. Tap OK.
Set screen lock
Creating a screen unlock pattern increases security on the
phone.
1. From the Home screen, tap ➔ Settings ➔ Location
and security.
2. Tap Set screen lock and select one of the following options:
• None: disables screen unlock security.
• Pattern: requires that you draw a pattern on the screen to unlock it.
Follow the onscreen instructions.
• PIN: requires that you enter a numeric PIN number to unlock the
screen. Enter a PIN number, confirm it, then tap OK.
• Password: requires that you enter a password to unlock the
screen. Enter a password, confirm it, then tap OK. Password must
contain at least one letter.
Note: Once you have set the screen lock option, the Set screen lock option
changes to Change screen lock.
Set up SIM card lock
Prevent another user from using your SIM card to make
unauthorized calls or from accessing information stored on your
SIM card by protecting the information using a PIN code.
113
When enabled, your phone will ask for a PIN number each time
you use the phone. Using this option you can also change your
SIM PIN number.
1. From the Home screen, tap ➔ Settings ➔ Location
and security.
2. Tap Set up SIM card lock.
3. Tap Lock SIM card, enter your SIM PIN code, then tap OK.
Note: You must activate Lock SIM card before you can change your SIM PIN
code.
4. Tap Change SIM PIN.
5. Enter your old SIM PIN code and tap OK.
6. Enter your new SIM PIN code and tap OK.
7. Re-type your new SIM PIN code and tap OK.
Visible passwords
When you create a phone password you can also configure the
phone to display the password as you type it instead of using an
asterisk (*).
1. From the Home screen, tap ➔ Settings ➔ Location
and security.
2. Tap Visible passwords to activate this feature.
Set up/Change password
Use this option to set up your password when one is first required
or change your current password.
1. From the Home screen, tap ➔ Settings ➔ Location
and security ➔ Set up/Change password.
2. Enter a new password and tap Confirm.
3. Enter the new password again and tap Confirm.
Select device administrators
The Select device administrators options will appear when you
are working with an application that has security policies. Device
administrators allow the phone to enhance its security. An
example would be an email exchange account.
1. From the Home screen, tap ➔ Settings ➔ Location
and security.
2. Tap Select device administrators.
3. Tap an application, such as Email for example, to allow the
application to perform administrative operations.
4. Tap Activate.
Changing Your Settings 114
Device administrators allows the phone to enhance its security.
The following options may be available depending on the type of
account:
• Password enabled: requires that devices ask for PIN or passwords.
• Minimum password length: sets the required number of characters
for the password. For example, you can require PIN or passwords to
have at least six characters.
• Alphanumeric password required: requires that passwords have a
combination of letters and numbers. They may include symbolic
characters.
• Maximum failed password attempts: specifies how many times a
user can enter the wrong password before the device wipes its data.
The Device Administration API also allows administrators to remotely
reset the device to factory defaults. This secures data in case the
device is lost or stolen.
• Maximum inactivity time lock: sets the length of time since the user
last touched the screen or pressed a button before the device locks the
screen. When this happens, users need to enter their PIN or passwords
again before they can use their devices and access data. The value
can be between 1 and 60 minutes.
Other features include:
• Prompt user to set a new password.
• Lock device immediately.
• Wipe the device's data (restores the device to factory defaults).
Credential storage
This option allows certain applications to access secure
certificates and other credentials. Certificates and credentials
can be installed to the SD card and password protected.
1. From the Home screen, tap ➔ Settings ➔ Location
and security.
2. Tap Use secure credentials to activate this feature. A check
mark displayed next to the feature indicates secure
credentials is active.
3. Tap Install encrypted certificates to install encrypted
certificates from the memory (SD) card.
4. Tap Set password to set or change the credential storage
password.
5. Tap Clear storage to clear the storage (SD card or phone
memory) of all contents and reset the credentials
password.
Applications
This device can be used for Android development. You can write
applications in the SDK and install them on this device, then run
the applications using the hardware, system, and network. This
feature allows you to configure the device for development.
115
Warning!: Android Dev Phone 1 devices are not intended for non-developer
end-users. Because the device can be configured with system
software not provided by or supported by Google or any other
company, end-users operate these devices at their own risk.
Unknown sources
This feature allows you to install non-Market applications.
1. From the Home screen, tap ➔ Settings ➔
Applications.
2. Tap Unknown sources.
A check mark is displayed to indicate it is active.
Manage Applications
This feature allows you to manage installed applications. You can
view and control currently running services, or use the device for
application development. Using the Samsung Apps option the
device notifies you when you are using Wi-Fi or Packet data for
Samsung applications.
You can also view the amount of memory or resources used as
well as the remaining memory and resources for each of the
applications on your phone and clear the data, cache, or defaults.
 From the Home screen, tap ➔ Settings ➔
Applications ➔ Manage applications.
Clearing application cache and data
Important!: You must have downloaded applications installed to use this
feature.
1. From the Home screen, tap ➔ Settings ➔
Applications ➔ Manage applications.
2. Tap an application in which to clear the cache or data.
3. Tap Clear data or Clear Cache.
Uninstalling third-party applications
Important!: You must have downloaded applications installed to use this
feature.
1. From the Home screen, tap ➔ Settings ➔
Applications ➔ Manage applications.
2. Tap the application you want to uninstall and tap Uninstall.
3. At the prompt, tap OK to uninstall the application.
4. At the Uninstall finished prompt, tap OK.
Changing Your Settings 116
Running services
The Running services option allows you to view and control
currently running services such as Daily Briefing, DataService,
Google Talk, SNS (messaging), Swype, and more.
To stop a service from running on your phone:
1. From the Home screen, tap ➔ Settings ➔
Applications ➔ Running services.
2. Tap a service.
3. Tap Stop.
Development
 From the Home screen, tap ➔ Settings ➔
Applications ➔ Development.
Important!: These features are used for development purposes only.
USB debugging
This feature is used for development purposes only.
Allow mock locations
This feature is used for development purposes only.
If you are a developer who is testing a GPS applications using
this device, you can tell the device that the phone is at different
GPS locations. In other words, the phone is allowed to “mock”
the coordinates.
USB Settings
1. From the Home screen, tap ➔ Settings ➔
Applications ➔ USB settings.
2. Select one of the following USB settings:
• Kies (Firmware update): Samsung Kies Mini is a software that
enables you to update your device firmware by connecting to the
PC. For more information, refer to “Updating Firmware by USB
Cable” on page 137.
• Media player: connects your device to a PC in order to synchronize
files with Windows Media Player. For more information, refer to
“Synchronizing with Windows Media Player” on
page 138.
• Mass storage: allows you to use the onboard storage capacity of
the phone to store and upload files. This option allows your
computer to detect the phone as a removable storage drive. For
more information, refer to “Connecting as a Mass Storage
Device” on page 138.
• Ask on connection: allows you to make a USB setting selection as
soon as the USB cable from your phone is connected with a PC.
Note: To use any downloaded market application that requires a USB
connection between your phone and your PC, you should first set the
USB setting to Mass storage.
117
Accounts and Synchronization
1. Sign in to your Google account.
2. From the Home screen, tap ➔ Settings ➔ Accounts
and sync.
3. From the General sync settings section, tap one of the
following options:
• Background data: allows your phone to use data in the
background.
• Auto-sync: automatically synchronizes your data with the phone.
4. From the Manage accounts section, tap on an open
account to set the account settings.
Privacy
In the Privacy settings, you can set your phone to allow backup
your current configurations, automatically restore data when
reinstalling an application, or reset the phone to erase all
personal data.
 From the Home screen, tap ➔ Settings ➔ Privacy.
Back up my data
By setting this option, the Google server will back up all of your
settings and data.
1. From the Home screen, tap ➔ Settings ➔ Privacy.
2. Tap Back up my data.
A green checkmark will appear.
Automatic restore
By setting this option, when you reinstall an application, all of
your backed up settings and data will be restored.
1. From the Home screen, tap ➔ Settings ➔ Privacy.
2. Tap Automatic restore.
A green checkmark will appear.
Factory data reset
From this menu you can reset your phone and sound settings to
the factory default settings.
1. From the Home screen, tap ➔ Settings ➔ Privacy.
2. Tap Factory data reset, then tap Reset phone.
Changing Your Settings 118
3. At the confirmation screen, tap Erase everything.
The phone resets to the factory default settings
automatically and when finished, displays the Home
screen.
Warning!: Performing a Factory data reset will erase all data from your phone
and internal SD card, including your Google account, system and
application data and settings, and downloaded applications. It will
not erase current system software, bundled applications, and
external SD card files such as music and photos.
Android System Recovery
Android System Recovery is used for Google updates but the
average user will never need to perform a system recovery.
Note: If you entered this menu by mistake, use the Volume Up/Down keys to
select reboot system now, then press the Power key. Your phone will
then continue to boot up.
To enter the Android System Recovery mode, follow these steps:
1. With the phone turned off, press the Power key and
Volume Up/Down keys at the same time until the phone
switches on.
2. Once SAMSUNG appears, release the Power key while
continuing to press the Volume Up/Down keys.
3. Continue to press the Volume Up/Down keys for at least 8
seconds, until Recovery mode is launched and the Android
System Recovery screen is displayed.
4. Release the Volume Up/Down keys.
5. The following options are available:
• reboot system now: this option turns on your phone.
• reinstall packages: this option allows you to apply updates to your
phone.
• delete all user data: deletes all data from the phone except
captures pictures and videos. For more information, refer to
“Factory data reset” on page 117.
• delete cache data: allows you to delete all cache data such as log
files.
• format internal sd-card: allows you to reformat the internal sd
card.
6. Use the Volume Up/Down keys to scroll up or down, then
use the Power key to make a selection.
Safe Mode
You can boot your phone into Safe Mode if you wish to
troubleshoot whether or not added applications are causing
problems with the device. Safe mode will only load basic system
software.
119
1. Make sure your phone is turned off.
2. Press and hold the power key ( ) to boot up your
device.
3. After the “Rethink Possible” letters change from blue to
black, continually tap the key.
When the Home screen is displayed, Safe mode is
displayed in the lower left corner of the screen.
SD card and phone storage
From this menu you can view the memory allocation for the
memory card as well as mount or unmount the SD card.
For more information about mounting or unmounting the SD card,
see “Memory Card” on page 37.
To view the memory allocation for your external SD card:
 From the Home screen, tap ➔ Settings ➔ SD card
and phone storage.The available memory displays under
the Total space and Available space headings.
Locale and text
This setting allows you to configure the language in which to
display the menus. You can also set onscreen keyboard options.
 From the Home screen, tap ➔ Settings ➔ Locale and
text.
Select locale
To set the language that the menus display on the phone:
1. From the Home screen, tap ➔ Settings ➔ Locale and
text ➔ Select locale.
2. Select a language and region from the list.
Select input method
There are three input methods available: Swype, Android
keyboard, and Samsung keyboard. Samsung keyboard is the
default text input method.
1. From the Home screen, tap ➔ Settings ➔ Locale and
text ➔ Select input method.
2. Select either Swype, Android keyboard, or Samsung
keyboard and follow the instructions below.
Swype Settings
To configure Swype settings:
1. From the Home screen, tap ➔ Settings ➔ Locale and
text ➔ Swype.
2. Tap one of the following Swype settings to activate the
setting:
Changing Your Settings 120
• Language: allows you to select the current text input language.
Default language is US English.
• Word prediction: uses a built-in word database to predict words
while entering text in Swype.
• Audio feedback: turns off sounds generated by the Swype
application.
• Vibrate on keypress: activates a vibration sensation as you enter
text using the keypad.
• Enable tip indicator: turns on an on-screen flashing indicator that
provides helpful user information.
• Auto-spacing: automatically inserts a space between words.
When you finish a word, just lift your finger or stylus and start the
next word.
• Auto-capitalization: automatically capitalizes the first letter of a
sentence.
• Show complete trace: select how long to show the Swype path.
• Word choice window: select how often the Word Choice window
displays.
• Speed vs. accuracy: select how quickly Swype responds to input.
• Swype help: allows you to view the on-line user manual for Swype.
• Tutorial: a short tutorial that helps you to get started using Swype.
• Version: lists the Swype version number.
Android Keyboard settings
From this menu you can set Android keyboard options.
1. From the Home screen, tap ➔ Settings ➔ Locale and
text ➔ Android keyboard.
2. The following options are available:
• Vibrate on keypress: check this field to have the phone vibrate
each time you touch a key on the keyboard.
• Sound on keypress: check this field to play a sound each time you
touch a key on the keyboard.
• Auto-capitalization: check this field to have the keyboard
automatically capitalize the first letter of the first word after a period,
the first word in a text field, and all words in name fields.
• Voice input: check this field to be able to enter text in a message
by talking.
• Input languages: tap on a language that you want to input.
• Quick fixes: check this field to automatically correct some common
misspellings as you type.
• Show suggestions: check this field to show suggested words in a
field above the keyboard as you type.
• Auto-complete: check this field to automatically enter a suggested
word, shown in orange in the field above the keyboard, when you
enter a space or punctuation.
121
Samsung Keyboard settings
From this menu you can set Samsung keyboard options.
1. From the Home screen, tap ➔ Settings ➔ Locale and
text ➔ Samsung keyboard.
2. Tap the Portrait keyboard types field and select a text input
method:
• Qwerty Keypad
• 3x4 Keypad
• Handwriting box 1
• Handwriting box 2
3. Tap the Input languages field and tap one of the languages.
4. To use XT9 Predictive text method, tap XT9. For more
information, refer to “Using XT9 Predictive Text” on
page 54.
5. If you are using XT9 Predictive text method, tap XT9
advanced settings. For more information, refer to “XT9
Advanced Settings” on page 122.
6. Tap the Keyboard sweeping field to be able to sweep the
keyboard and change from ABC to ?123 mode. For more
information, refer to “Text Input Methods” on page 52.
7. Tap the Auto-capitalization field to enable automatic
capitalization.
8. Tap Handwriting settings. The following options are
available:
• Recognition time: allows you to set the time it takes to recognize
each handwritten letter. The longer the time, the more accurate.
• About: allows you to view information on the handwriting tool
manufacturer and view Gesture Methods for Space, Enter, and
Back Space.
9. Tap Voice input to activate the Voice input feature. Voice
input is an experimental feature using Google’s networked
speech recognition application.
10. Tap Auto-full stop to activate the Auto-full stop feature.
When you double space in a message, a period and space
is added and the keyboard is placed into Uppercase mode
so you can start the new sentence with a capital letter.
11. Tap Tutorial for a short tutorial on using the Samsung
keyboard.
Changing Your Settings 122
XT9 Advanced Settings
The following XT9 Advanced settings are only available if the XT9
field has been selected.
1. From the Home screen, tap ➔ Settings ➔ Locale and
text ➔ Samsung keyboard ➔ XT9 Advanced settings.
2. Tap the Word completion field to enable word completion.
Your phone will predict how to complete the word you have
started.
3. Tap the Word completion point field to set how many letters
should be entered before a prediction is made.
4. Tap the Spell correction field. This option corrects
typographical errors by selecting from a list of possible
words that reflect the characters of the keys you tapped as
well as the characters of nearby keys.
5. Tap the Next word prediction field to enable word prediction
for the next word.
6. Tap the Auto-append field to automatically add predictions
to the word you are typing.
7. Tap the Auto-substitution field to automatically replace
words that you are typing. This option will help for
accidental misspellings.
8. Tap the Regional correction field. This option sets the
device to automatically correct mistyped words according
to normal spelling for your region.
9. Tap the Recapture field. This option sets the device to redisplay the word suggestion list when you select the wrong
word from the list.
10. To add a new word to the T9 dictionary:
Tap the XT9 my words field, then press ➔ Add. Enter
the new word in the Register to XT9 my words field, then
tap Done.
11. To add words to substitute (for example youve becomes
you’ve) tap XT9 auto-substitution.
12. A list of substitutions is displayed. If you don’t see the
substitution you want, press ➔ Add, and then input
the Shortcut word and Substitution word. Tap Done.
123
Voice Input and Output
This feature allows the device to provide a verbal readout of
onscreen data such as messages and incoming caller
information.
1. From the Home screen, tap ➔ Settings ➔ Voice input
and output.
2. Tap Voice recognition settings to access the following
options:
• Language: allows you set the language you will be using for your
voice input and output.
• SafeSearch: allows you to filter explicit images when performing
voice searches. You can set to Off, Moderate, or Strict.
• Block offensive words: allows you to hide recognized offensive
words.
• Show hints: allows you to see hints displayed on the search box.
3. Tap Text-to-speech settings to access the following
options:
• Listen to an example: plays a short example of what the text-tospeech feature sounds like on your device when activated.
• Driving mode: allows incoming calls and new notifications to be
read out automatically.
• Always use my settings: accepts an override of application
settings with personal configurations for this text-to-speech settings
screen. If enabled, your device defaults to using the text-to-speech
feature.
• Default engine: displays the default engine used for voice
recognition.
• Install voice data: confirms the installation of necessary data
required for voice synthesis.
• Speech rate: adjusts the rate at which onscreen text is spoken by
the device. Choose from: Very slow, Slow, Normal, Fast, and Very
fast.
• Language: assigns the language used for verbal readout. Choose
from American English or Spanish.
• Pico TTS: allows you to modify settings for the Pico TTS default
engine.
Accessibility Settings
This service is able to collect all the text you type, including
personal data credit card numbers except passwords. It may also
log your user interface interactions. It comes from the
applications such as KickBack, SoundBack, and TalkBack.
1. From the Home screen, tap ➔ Settings ➔
Accessibility.
2. Download a suitable screen reader from Android Market.
For more information, refer to “Market” on page 156.
Changing Your Settings 124
3. Return to the Accessibility menu and tap Accessibility to
create a checkmark and activate the feature.
4. Tap the services for which you want data to log. A
checkmark will appear.
5. If an Attention prompt appears, tap OK to continue or
Cancel to exit.
6. Tap The power key ends calls option to create a checkmark
if you want to press the power key to end calls. This will
not turn off the screen.
Date and Time
This menu allows you to change the current time and date
displayed.
1. From the Home screen, tap ➔ Settings ➔ Date and
time.
2. Tap Automatic to allow the network set the date and time.
Important!: Deactivate Automatic to manually set the rest of the options.
3. Tap Set date and use the plus or minus icons to set the
Month, Day, and Year then tap Set.
4. Tap Select time zone, then tap a time zone.
5. Tap Set time and use the plus or minus icons, set Hour, and
Minute. Tap PM or AM, then tap Set.
6. Optional: Tap Use 24-hour format. If this is not selected the
phone automatically uses a 12-hour format.
7. Tap Select date format and tap the date format type.
About Phone
This menu contains legal information, system tutorial
information, and other phone information such as the model
number, firmware version, baseband version, kernal version, and
software build number.
To access phone information:
 From the Home screen, tap ➔ Settings ➔ About
phone. The following information displays:
• Status: displays the battery status, the level of the battery
(percentage), the phone number for this device, the network
connection, signal strength, mobile network type, service state,
roaming status, mobile network state, IMEI number, IMEI SV, Wi-Fi
MAC address, Bluetooth address, and Up time.
• Battery use: displays the applications or services (in percentages)
that are using battery power.
• Legal information: This option displays information about Open
source licenses as well as Google legal information. This
information clearly provides copyright and distribution legal
125
information and facts as well as Google Terms of Service, Terms of
Service for Android-powered Phones, and much more pertinent
information as a reference.
Read the information and terms, then press to return to the
Settings menu.
• System tutorial: provides a quick, online tutorial that walks you
through basic phone features. Read the on-screen information and
follow the system prompts.
• Model number: displays the phone’s model number.
• Firmware version: displays the firmware version loaded on this
handset.
• Baseband version: displays the baseband version loaded on this
handset.
• Kernel version: displays the kernel version loaded on this handset.
• Build number: displays the software, build number.
Note: Firmware, baseband, kernal and build numbers are usually used for
updates to the handset or support. For additional information please
contact your AT&T service representative.
Software Update
The Software Update feature enables you to use your phone to
connect to the network and upload any new phone software
directly to your phone. The phone automatically updates with the
latest available software when you access this option.
1. From the Home screen, tap ➔ Settings ➔ Software
update.
2. Tap Check for updates.
3. At the Software update prompt, tap OK to continue.
4. The phone automatically updates the software (if available)
otherwise, when the Current software is up to date prompt
is displayed, tap OK.
5. When updating software, once the delta file for FOTA
update is downloaded, you can delay the update on the
start screen by postponing it for a certain period of time. If
you want to resume the update before the selected time,
tap Continue update.
Connections 126
Section 9: Connections
This section describes the various connections your phone can
make including accessing the Internet with your web browser,
Wi-Fi, Bluetooth, and Connecting your PC.
Web
The Web is your access to the mobile web. This section explains
how to navigate the web browser and introduces you to the basic
features.
Accessing the Mobile Web
To access the Web:
 From the Home screen, tap Web . The at&t/YAHOO!
mobile homepage displays.
Navigating with the Web Browser
1. To select an item, tap an entry.
2. To scroll through a website in Mobile view, sweep the
screen with your finger in an up or down motion.
3. To scroll through a website in Desktop view, sweep the
screen with your finger in an up or down or left and right
motion.
4. Sweep the screen left to right to move laterally across a
web page.
5. To return to the previous page, press .
Web Browser Views
You can set your web browser view to Mobile or Desktop. The
default on your web browser is Mobile view. Desktop view
displays a website the same way it would appear on your PC.
Mobile view displays the website in a modified format that makes
it easier to read.
To go to Desktop view, follow these steps:
1. Scroll to the bottom of the main webpage to
View: Mobile | Desktop.
2. Tap Desktop.
3. Tap Mobile to switch back to Mobile view.
127
Zooming in and out on the Browser in Desktop View
There are several ways to Zoom in and out on your browser while
in Desktop view:
• Double tap the web page to zoom in or out.
• When you sweep the screen in any direction the icon
displays. Press to zoom in or to zoom out.
• Pinch the screen inwards to zoom out and pinch the screen outwards
to zoom in. See diagram below.
Web Browser Options
1. From the home page, press to access the following
options:
• New window: displays a new window so you can browse multiple
URLs. For more information, refer to “Adding and Deleting
Windows” on page 128.
• Windows: displays a list of the windows you have open.
• Brightness setting: allows you to adjust the brightness of your
display.
• Refresh: reloads the current page.
• Forward: forwards the browser to another web page.
• More: displays the following additional options:
– Add bookmark: allows you to add a URL to your bookmark list.
– Add shortcut to Home: allows you to set your homepage as a
shortcut on your display.
– Add RSS feeds: allows you to add RSS (Really Simple Syndication)
feeds. RSS is a family of web feed formats used to publish frequently
updated works, such as blog entries, news headlines, audio, and video.
– Find on page: allows you to search in the current page.
– Page info: displays information about the selected page.
– Share page: allows you to share the page using Gmail or as a
message.
– Downloads: displays the download history.
Zoom In Zoom Out
Connections 128
– Settings: allows you to modify your web settings. For more information,
refer to “Web Browser Settings” on page 130.
Enter a URL
You can access a website quickly by entering the URL. Websites
are optimized for viewing on your phone.
To enter a URL and go to a particular website, follow these steps:
1. Tap the URL field at the top of your screen.
2. Enter the URL using the on-screen keypad.
The website displays.
Search the Internet
To perform an internet search using keywords, follow these
steps:
1. From the at&t/YAHOO! homepage, tap the Search field.
2. Enter the keyword(s) to search using the on-screen keypad
and tap .
3. A list of search results displays.
4. Tap a link to view the website.
Adding and Deleting Windows
You can have up to four Internet windows open at one time. To
add a new window, follow these steps:
1. From your browser, press ➔ Windows.
2. Tap . A new browser window is opened.
3. Press ➔ Windows to see a list of all open windows.
4. Tap a window listing to open up that Internet window.
5. Tap at the top right corner of the web page thumbnail
to delete the window.
Using Bookmarks
While navigating a website, you can bookmark a site to quickly
and easily access it at a future time. The URLs (website
addresses) of the bookmarked sites are displayed in the
Bookmarks page. From the Bookmarks page you can also view
your Most visited websites and view your History.
1. From the Home webpage, tap .
The Bookmarks page is displayed.
2. Press to display the following options:
• Bookmark last-viewed page: Creates a new bookmark for the
last webpage that you viewed.
129
• List/Thumbnail view: You can select Thumbnail view (default) to
see a thumbnail of the webpage with the name listed, or you can
select List view to see a list of the bookmarks with Name and URL
listed.
• Create folder: Creates a new bookmark folder.
3. Tap a bookmark to view the webpage, or touch and hold a
bookmark for the following options:
• Open: Opens the webpage of the selected bookmark.
• Open in new window: Opens the webpage in a new window.
• Edit bookmark: Allows you to edit the name or URL of the
bookmark. For more information, refer to “Editing Bookmarks”
on page 129.
• Add shortcut to Home: Adds a shortcut to the bookmarked
webpage to your phone’s Home screen.
• Share link: Allows you to share a URL address via Bluetooth,
Facebook, Gmail, or Messaging.
• Copy link URL: Allows you to copy the URL address to use in a
message.
• Delete bookmark: Allows you to delete a bookmark. For more
information, refer to “Deleting Bookmarks” on page 129.
• Set as homepage: Sets the bookmark to your new homepage.
Adding Bookmarks
1. From the Home webpage, tap ➔ Add if you are in
Thumbnail view. Tap Add bookmark.. if you are in List view.
2. Use the on-screen keypad to enter the name of the
bookmark and the URL.
3. Tap OK.
4. Saved to bookmarks will appear at the bottom of the page.
Editing Bookmarks
1. From the Bookmarks page, tap and hold the bookmark you
want to edit.
2. Tap Edit bookmark.
3. Use the on-screen keypad to edit the name of the
bookmark or the URL.
4. Tap OK.
Deleting Bookmarks
1. From the Bookmarks page, tap and hold the bookmark you
want to delete.
2. Tap Delete bookmark.
3. At the Delete confirmation window, tap OK.
Connections 130
Emptying the Cookies
A cookie is a small file which is placed on your phone by a
website during navigation. In addition to containing some sitespecific information, it can also contain some personal
information (such as a username and password) which can pose
a security risk if not properly managed. You can clear these
cookies from your phone at any time.
1. From the Home webpage, press ➔ More ➔ Settings
➔ Clear all cookie data.
2. At the All cookies will be deleted prompt, tap Yes to delete
the cookies or tap Cancel to exit.
Using your History
The History list provides you with a list of the most recently
visited websites. These entries can be used to return to
previously unmarked web pages.
1. From the Home webpage, tap ➔ History .
A list of your most recently visited websites is displayed
with Name and URL address.
2. Tap any entry to display the webpage.
3. Press ➔ Clear history to delete the History list.
Using Most Visited
The Most visited list provides you with a list of the most visited
websites that you have bookmarked. These entries can be used
to return to previously unmarked web pages.
1. From the Home webpage, tap ➔ Most visited .
A list of your most visited webpages is displayed with
Name and URL address. The webpages that have been
visited the most will appear at the top.
2. Tap any entry to display the webpage.
Web Browser Settings
To make adjustments in your browser settings, follow these
steps:
1. Tap Web ➔ ➔ More ➔ Settings.
2. The following options are available:
• Default zoom: Adjusts the zoom feature. Set to Far, Medium, or
Close.
• Open pages in overview: Shows an overview of newly opened
web pages.
• Text encoding: Adjusts the current text encoding.
History
Most visited
131
• Block pop-up windows: Prevents popup advertisement or
windows from appearing onscreen. Remove the checkmark to
disable this function.
• Load images: Allows web page images to be loaded along with the
other text components of a loaded website.
• Auto-fit pages: Allows web pages to be resized to fit as much of
the screen as possible.
• Landscape view only: Displays the web browser in only the
horizontal position.
• Enable JavaScript: Enables javascript for the current Web page.
Without this feature, some pages may not display properly. Remove
the checkmark to disable this function.
• Enable plug-ins: Allows the download of plug-ins such as Adobe
Flash.
• Open in background: New pages are launched in a separate page
and displayed behind the current one. Remove the checkmark to
disable this function.
• Set home page: Sets the current home page for the web browser.
• Default storage: Allows you to set your default storage to Phone or
Memory Card.
• Clear cache: Deletes all currently cached data. Tap Yes to
complete the process.
• Clear history: Clears the browser navigation history. Tap Yes to
complete the process.
• Accept cookies: Allows sites, that require cookies, to save and
read cookies from your device.
• Clear all cookie data: Deletes all current browser cookie files.
• Remember form data: Allows the device to store data from any
previously filled out forms. Remove the checkmark to disable this
function.
• Clear form data: Deletes any stored data from previously filled out
forms. Tap Yes to complete the process.
• Enable location: Allows websites to request access to your
location.
• Clear location access: Clears location access for all websites. Tap
Yes to complete the process.
• Remember passwords: Stores usernames and passwords for
visited sites. Remove the checkmark to disable this function.
• Clear passwords: Deletes any previously stored usernames or
passwords. Tap Yes to complete the process.
• Show security warnings: Notifies you if there is a security issue
with the current website. Remove the checkmark to disable this
function.
• Set search engine: Allows you to choose Google, Yahoo!, or Bing
as your search engine.
• Website settings: View advanced settings for individual websites.
• Reset to default: Clears all browser data and resets all settings to
default.
Connections 132
Wi-Fi
About Wi-Fi
Wi-Fi (short for "wireless fidelity"and sometimes referred to as
wifi) is a term used for certain types of Wireless Local Area
Networks (WLAN). These device types use an 802.11 wireless
specification to transmit and receive wireless data. Wi-Fi
communication requires access to an existing and accessible
Wireless Access Point (WAP). These WAPs can either be Open
(unsecured) as within most Hot Spots, or Secured (requiring
knowledge of the Router name and password).
Turning Wi-Fi On and Off
By default, your device’s Wi-Fi feature is turned on. When Wi-Fi is
on, your device is able to discover and connect to compatible inrange WAPs.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Tap the Wi-Fi field to activate or deactivate the feature. A
green checkmark indicates that Wi-Fi is active. Tap the
green checkmark if you want to deactivate Wi-Fi.
When you turn Wi-Fi on, the device will scan for available
in-range wireless networks and display them under Wi-Fi
networks on the same screen.
Connect to a Wi-Fi Network
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
The network names and security settings (Open network or
Secured with WEP) of detected Wi-Fi networks are
displayed in the Wi-Fi networks section.
2. Tap the network you want to connect to.
Note: When you select an open network, you will be automatically connected
to the network.
3. Enter a wireless password if necessary.
Manually add your new network connection
1. Tap Add Wi-Fi network.
2. Enter the Network SSID. This is the name of your Wireless
Access Point.
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP.
4. If secured, you will also need to enter your WAP’s
password.
133
5. Tap Save to store the new information and connect to your
target WAP.
Note: The next time your device connects to a previously accessed or
secured wireless network, you are not prompted to enter the WAP key
again, unless you reset your device back to its factory default settings.
Turning Wi-Fi Off
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Tap the Wi-Fi field to deactivate the feature. The green
checkmark will be removed.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
cause an added drain to your battery and reduce your use times.
Manually Scan for a Wi-Fi Network
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Press ➔ Scan.
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless Access
Point (WAP).
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set
up many of your device’s Wi-Fi service, including:
• Setting your Wi-Fi sleep policy
• Viewing your device’s MAC Address
• Configuring use of either a DHCP or Static IP
To access the Bluetooth Settings menu:
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Press ➔ Advanced.
For more information, refer to “Network Notification” on
page 100.
Connections 134
Bluetooth
About Bluetooth
Bluetooth is a short-range communications technology that
allows you to connect wirelessly to a number of Bluetooth
devices, such as headsets and hands-free car kits, and
Bluetooth-enabled handhelds, computers, printers, and wireless
devices. The Bluetooth communication range is usually up to
approximately 30 feet.
Turning Bluetooth On and Off
To turn Bluetooth on:
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings.
2. Tap the Bluetooth field to activate the feature (checkmark
indicates active). When active, appears within the
Status area.
To turn Bluetooth off:
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings.
2. Tap the Bluetooth field to deactivate the feature. The green
checkmark will be removed.
Bluetooth Status Indicators
The following icons show your Bluetooth connection status
at a glance:
Displays when Bluetooth is active.
Displays when Bluetooth is connected (paired) and
communicating.
Displays when Bluetooth is disabled (default status).
Bluetooth Settings
The Bluetooth settings menu allows you to set up many of the
characteristics of your device’s Bluetooth service, including:
• Entering or changing the name your device uses for Bluetooth
communication and description
• Setting your device’s visibility (or “discoverability”) for other Bluetooth
devices
• Displaying your device’s Bluetooth address
To access the Bluetooth Settings menu:
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings.
2. Verify your Bluetooth is active.
[no icon]
135
3. Tap the Device name, Visible, and Scan devices fields to set
the options.
To change your Bluetooth name:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Device name.
3. Enter a new name.
4. Tap OK to complete the rename process.
To make your device visible:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Visible.
• Making your device visible allows it to be detected by other devices
for pairing and communication.
Note: Your device is visible for up to 120 seconds (2 minutes). This value
appears as a countdown within this field.
To scan for Bluetooth devices:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Scan devices to
search for visible external Bluetooth-compatible devices
such as headsets, devices, printers, and computers.
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish trusted
connections between your device and another Bluetooth device.
When you pair devices, they share a passkey, allowing for fast,
secure connections while bypassing the discovery and
authentication process.
To pair your device with another Bluetooth device:
1. Verify your Bluetooth is active.
2. Tap Scan devices. Your device will display a list of
discovered in-range Bluetooth devices.
3. Tap a device from the list to initiate pairing.
4. Enter the passkey or PIN code, if needed, and tap OK.
5. The external device will then have to also accept the
connection and enter your device’s PIN code.
Once successfully paired to an external device,
appears within the Status area.
Note: Due to different specifications and features of other Bluetoothcompatible devices, display and operations may be different, and
functions such as transfer or exchange may not be possible with all
Bluetooth compatible devices.
Connections 136
Note: Pairing between two Bluetooth devices is a one-time process. Once a
pairing has been created, the devices will continue to recognize their
partnership and exchange information without having to re-enter a
passcode again.
To disconnect a paired device:
Disconnecting a paired device breaks the connection between
the device and your phone, but retains the knowledge of the
pairing. At a later point when you wish to reconnect the device,
there is no need to setup the connection information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap the previously paired
device (from the bottom of the page).
3. Tap OK to confirm disconnection.
– or –
From the Bluetooth settings page, touch and hold the
name of the previously paired device, and select
Disconnect.
Note: Disconnections are manually done but often occur automatically if the
paired device goes out of range of your phone or it is powered off.
To delete a paired device (unpair):
Deleting a device from your list removes its “connection record”
and upon reconnection would require that you re-enter all the
previous pairing information.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, touch and hold the
name of the previously paired device (from the bottom of
the page). This opens the connected device’s menu
options.
3. Tap Unpair to delete the paired device.
Sending Contacts via Bluetooth
Depending on your paired devices’ settings and capabilities, you
may be able to send pictures, Contact information, or other items
using a Bluetooth connection.
Note: Prior to using this feature, Bluetooth must first be enabled, and the
recipient’s device must be visible.
1. Verify your Bluetooth is active.
2. From the main Home screen, tap Contacts .
3. Press ➔ Import/Export ➔ Send namecard via.
137
4. Tap each contact that you would like to send via Bluetooth.
A green checkmark will appear next to each entry you
select.
5. Tap Send.
6. Tap Bluetooth.
7. Select the paired device to send the contacts to.
Note: The external Bluetooth device must be visible and communicating for
the pairing to be successful.
8. A Bluetooth share notification will appear in your
notifications list.
PC Connections
You can connect your device to a PC using an optional PC data
cable using various USB connection modes. When you connect
the device to a PC, you can synchronize files with Windows
Media Player, transfer data to and from your device directly, or
use the Kies Mini program.
What is Kies Mini?
Samsung Kies Mini is a software that enables you to update your
device firmware by connecting to the PC.
Updating Firmware by USB Cable
To update your firmware, follow these steps:
1. From your computer, download Kies Mini from
http://www.samsung.com/us/support/downloads/SGHI997ZKAATT and follow the onscreen instructions to install
it.
An icon will be created on your PC desktop.
2. From your computer, click the desktop icon to launch Kies
Mini.
3. On your phone, from the Home screen, tap ➔ Settings
➔ Applications ➔ USB settings ➔ Kies (Firmware update).
4. Press to return to the Home screen.
5. Make sure the battery is fully charged and connect your
phone to the computer using the USB cable.
The Kies Mini pop-up is displayed on your computer.
6. From your computer, click the Phone Upgrade button.
Cautions and privacy notices regarding the update display.
7. If the computer displays a connection dialog box, close it.
Connections 138
8. Click on the I have read and understood the preceding
information check box, then click Upgrade.
The installation process begins.
9. When the installation process completes, click OK on the
Result screen.
The phone reboots and the upgrade screen closes. You can
now disconnect and use the handset as normal.
Synchronizing with Windows Media Player
Ensure that Windows Media Player is installed on your PC.
1. From the Home screen, tap ➔ Settings ➔ Applications
➔ USB settings ➔ Media player.
2. Press to return to the Home screen.
3. Using an optional PC data cable, connect the multifunction
jack on your device to a PC with Windows Media Player
installed. A pop-up window displays on the PC when
connected.
4. Open Windows Media Player to synchronize music files.
5. Edit or enter your device’s name in the pop-up window.
6. Select and drag the music files you want to the sync list
and begin synchronizing.
Connecting as a Mass Storage Device
You can connect your device to a PC as a removable disk and
access the file directory. If you insert a memory card in the
device, you can also access the files directory from the memory
card by using the device as a memory card reader.
Note: The file directory of the memory card displays as a removable disk,
separate from the internal memory.
Note: To use any downloaded market application that requires a USB
connection between your phone and your PC, you should first set the
USB setting to Mass storage.
1. Insert a memory card into the device to transfer files from
or to the memory card.
2. From the Home screen, tap ➔ Settings ➔ Applications
➔ USB settings ➔ Mass storage.
3. Press to return to the Home screen.
4. Connect the multifunction jack on your device to a PC
using an optional PC data cable.
A pop-up window displays on the PC when connected.
139
5. Open the folder to view files.
6. Copy files from the PC to the memory card.
Media Playback on HD TV
Your device comes with an MHL adapter included in the box
which allows you to view videos and other media that you have
on your phone, on a compatible HD TV.
To connect your device, follow these steps:
1. Connect one end of a universal HDMI cable into the MHL
Adapter (1) and then connect the other end to the HDMI
port on your TV (2).
Note: The Universal HDMI cable is not included with your device.
2. Connect your Travel Charger to the MHL Adapter (3).
Warning!: Make sure that you use the Travel Charger that was included with
your phone. If you use an unapproved travel charger, there is a
possibility that the MHL adaptor might not function properly.
3. Connect your Travel Charger to an approved power source
(4).
4. Connect the MHL Adapter connector into the Power/
Accessory Interface port on your device (5). This is the
same port that you normally use to connect your Travel
Charger.
Note: Do not connect the MHL Adapter to your device through the Desktop
dock. The Video and Audio output will not work correctly.
Note: Any incoming calls or messages will pause the media output. After
taking the calls or acknowledging the messages, the media will
resume playing.
To TV
To Power Source
Travel Charger
To Phone
Power/Accessory
Interface port
HDMI Cable
(not included)
MHL Adapter
Universal
Connections 140
Note: If your TV has multiple HDMI ports, you may use any of the ports but
need to make sure your TV settings have the correct HDMI port
selected. Consult your TV owner’s manual.
The TV screen will instantly display what is on your device home
screen.
Note: After connecting the MHL Adapter, the upper and lower sides of the
TV/Monitor’s screen may be cut off. In this case, you can adjust the TV/
Monitor in the Settings menu on your TV. Consult your TV owner’s
manual.
Using your TV Remote for Media Playback
Your device comes with RCP (Remote Control Protocol). With RCP,
you can:
• Use the navigation keys on your TV remote to browse through your
phone User Interface.
• Access Video conferencing, Gaming, Internet, etc.
• Use the TV remote media keys to control phone video while the phone
is connected to your TV.
To connect to RCP, follow these steps:
1. Connect your phone to the HDMI Port 1 on your TV if
possible. For more information, refer to “Media Playback
on HD TV” on page 139.
2. Set the following settings on your TV:
Note: Menu setting headings may differ depending on the brand of your TV.
Go to Menu/Tools ➔ Settings/Input ➔ Anynet+ (HDMI-CEC)
➔ MHL Device (Setup) and set Anynet+ (HDMI-CEC) to ON.
Go to Menu/Tools ➔ Settings/Input ➔ Anynet+ (HDMI-CEC)
➔ MHL Device (Setup) ➔ Searching Connections.
After searching is complete, Anynet+ settings complete will
be displayed.
3. Press OK.
You are ready to use your TV remote to control your phone
User Interface.
Note: When using your TV remote control with this application, there is a
possibility that the remote may not work correctly if the TV is not made
by SAMSUNG.
141
With RCP, you can use following keys on your TV remote control:
Key Function for Video Player Function for Music Player
Select Select Select
Exit Exit Exit
Play Play/Pause Play/Pause
Pause Pause Pause
Stop Stop Stop
Rew Rewind Previous file play
FF Fast Forward Next file play
Up Move Up Move Up
Down Move Down Move Down
Left Move Left Move Left
Right Move Right Move Right
Applications 142
Section 10: Applications
This section contains a description of each application that is
available in the Applications Menu, its function, and how to
navigate through that particular application. If the application is
already described in another section of this user manual, then a
cross reference to that particular section is provided.
Tip: To open applications quickly, add the icons of frequently-used
applications to one of the Home screens. For details, see “Customizing
Your Home Screen” on page 31.
You can also add an application icon as a Primary Shortcut that will
display on all Home screens. If you add an application as a primary
shortcut, the application icon will not be displayed in the Applications
menu. For more information, refer to “Adding and Removing Primary
Shortcuts” on page 32.
AllShare
AllShare allows your phone to stream photos, music and videos
from its memory to other Digital Living Network Alliance (DLNA)
certified devices. Your phone can also play digital content
streamed from other DLNA certified devices.
Note: To view more information about DLNA certified products visit
http://www.dlna.org/home.
1. Connect to a Wi-Fi network. For more information, refer to
“Connect to a Wi-Fi Network” on page 132.
2. From the Home screen, tap ➔ AllShare .
3. Tap Settings to configure the following settings:
• Media server name: defaults to your phone. Use the keypad to
enter a new Media server if desired, and tap Save.
• Share media: allows you to restrict what is shared from your
phone. Tap the items you want to share and tap OK.
• Access point network: is the Wi-Fi network that you are
connected to. Tap Add Wi-Fi network to select another network.
• Upload from other devices: allows you set the phone to select
how uploads from other devices are started. Select Always accept,
Always ask, or Always reject and tap OK.
• Default memory: allows you to have media saved to your Phone or
Memory Card. Select an option and tap OK.
Depending on the setting you changed, a pop-up screen
may display to restart AllShare. Tap Yes to continue.
143
4. Tap one of the following options:
• Play file from my phone on another player: You can enjoy
multimedia content saved on your mobile phone on your TV or
Hi-Fi. You can then use your mobile phone like a remote control.
• Play file from server on my phone: You can enjoy multimedia
content saved on other devices, such as your PC or laptop, on your
phone.
• Play file from server on another player via my phone: You can
enjoy multimedia content saved on your PC or laptop using other
devices like your TV or Hi-Fi. You can then use your mobile phone
like a remote control.
5. Follow the on-screen instructions.
Angry Birds
Angry Birds is a fun and addictive puzzle game. You must
slingshot birds with various powers, across the screen to destroy
various structures constructed by green pigs, who just happened
to have taken some eggs from the birds. You can play Angry
Birds with just the touchscreen. No buttons, keys, or joysticks
needed!
1. From the Home screen, tap ➔ Angry Birds .
2. Follow the onscreen instructions.
AT&T Code Scanner
AT&T Code Scanner allows you to scan two-dimensional (QR and
datamatrix codes) and one-dimensional (UPC and EAN) barcodes
found in magazines, stores, and online.
1. From the Home screen, tap ➔ AT&T Code Scanner
.
Note: The first time you use the AT&T Code Scanner, you will need to
download the application from the Market. For more information, refer
to “Market” on page 156.
2. Read the Terms and Conditions and tap Accept to continue.
3. At the My Profile screen, tap Ok to enter profile information
or tap Not now to bypass.
Applications 144
4. Position your phone approximately 6-8 inches from the
barcode. Ensure that the barcode is completely within the
window as shown below. Keep your phone steady for best
results.
5. The scanner will automatically scan the barcode. It may
take several seconds.
6. After the scan, tap Yes to open the web page to view the
information on the barcode that was scanned.
AT&T FamilyMap
AT&T FamilyMap allows you to conveniently locate your family
members from your wireless phone or PC and know that your
family's location information is secure and private.
1. From the Home screen, tap ➔ AT&T FamilyMap .
Note: The first time you use the AT&T FamilyMap, you will need to download
the application from the Market. For more information, refer to
“Market” on page 156.
2. On the AT&T FamilyMap Sign In webpage, enter your
Phone Number and Password in the appropriate fields and
tap Sign In.
Note: To sign up for service, visit http://www.att.com/familymap for more
information.
3. Follow the on-screen instructions.
AT&T Navigator
AT&T Navigator provides you with access to real-time GPS-driven
applications. These programs not only allow you to achieve turnby-turn navigation, but also access local searches.
Important!: You must have a data plan to use this feature.
Using AT&T Navigator
1. From the Home screen, tap ➔ AT&T Navigator .
2. Read the Terms of Service and tap Accept to acknowledge
the terms of use.
145
The first time you access AT&T Navigator, files will be
downloaded to your phone.
3. The AT&T Navigator main screen displays.
4. Select an option and follow the on-screen instructions.
• Drive To: lets you get driving directions from wherever you are to
wherever you’re going. Choices include:
– Set Up Home: allows you to set your home address.
– My Favorites: displays your favorite (marked) GPS navigation sites.
– Recent Places: displays your recently entered locations.
– Address: allows you enter an address to get directions. You can type or
speak the address.
– Contacts: allows you to access a contact to get address information.
– Places: allows you to access different places such as ATMs, Food, Gas,
Grocery, and many more.
– Airport: allows you to use either local airports based on current a GPS
location or manually enter the 3-letter airport code or name.
• Places: allows you to access different places such as ATMs, Food,
Gas, Grocery, and many more.
• Maps & Traffic: provides access to your Current Location, Traffic,
Camera locations, and Places.
• Share & More: provides additional features such as sharing your
location with contacts, recording your current location, creating and
storing My Favorites locations, setting up Commute Alerts,
accessing the Product Tour, setting preferences, and setting
detailed application preferences.
5. Press to exit, then tap Yes at the Exit AT&T Navigator?
prompt.
Note: These services require the purchase of a subscription.
Obtaining Driving Directions
Your phone’s built-in GPS hardware allows you to get real-time
driving directions to selected locations or establishments based
on your current location.
1. From the Home screen, tap ➔ AT&T Navigator ➔
Drive To ➔ Address.
2. Enter the Street number and name and City, State or Zip
using the onscreen keypad.
– or –
Tap to use the voice feature and speak the address.
3. Tap Submit to begin the search process and receive driving
directions from the GPS network.
Several routes will be displayed in different colors with
distance and time displayed for each route.
Applications 146
4. Tap on a route box to highlight it, then tap Go.
5. Follow both the on-screen and audio directions.
Browser
Open the browser to start surfing the web. The browser is fully
optimized and comes with advanced functionality to enhance the
Internet browsing feature on your phone. For more information,
refer to “Web” on page 126.
Calculator
With this feature, you can use the phone as a scientific calculator.
In portrait mode, the calculator provides the basic arithmetic
functions; addition, subtraction, multiplication, and division. In
landscape mode, you can use the calculator as a scientific
calculator which enables you to calculate complex expressions
such as trigonometric functions, exponents, logarithms, absolute
values, and more.
1. From the Home screen, tap ➔ Calculator .
2. Hold the phone in portrait mode to use the basic calculator
or turn the phone to landscape mode to use the scientific
calculator.
3. Enter the first number using the on-screen numeric keys.
4. Enter the operation for your calculation by tapping the
corresponding on-screen arithmetic or scientific function
key.
5. Enter the second number.
6. To view the result, tap equals (=).
7. To view calculator history, tap located at the top
of the calculator buttons. A history of your past
calculations is displayed.
8. To clear the calculator history, press ➔ Clear history.
Calendar
With the Calendar feature, you can consult the calendar by day,
week, or month, create events, and set an alarm to act as a
reminder, if necessary.
To access the Calendar:
1. From the Home screen, tap ➔ Calendar .
2. The following options are available:
• Month: the calendar displays the selected month with today’s date
highlighted. At the bottom of the calendar, scheduled events display
in the order that they occur.
• Week: the calendar displays the selected week with today’s time
and date highlighted.
147
• Day: the calendar displays the selected day with any events
highlighted.
• List: the Event List displays all events that you have added for all
dates in the order that they appear.
Calendar Options
 From any Calendar view, press to display the
following options:
• Search: allows you to search through your calendar for a particular
word or words.
• Create: allows you to create a new event for any day or time period.
• Go to: allows you to go to any date on your calendar.
• Today: takes you to today’s date, if you are not already there.
• Delete: displays the event list, where you can select events to
delete.
• Settings: displays the following calendar settings:
– Calendars: displays all calendars they you have created.
– Calendar sync: allows you to sync your calendar with other accounts
such as email or social accounts.
– Default view: allows you to set the default view to Month, Week, Day,
or List.
– Day views: allows you to set the Day view to display with times listed or
as a list of events. Select Time grid or Event List.
– First day of week: allows you to set the first day of the week to Sunday
or Monday. This will affect how the Month view calendar is displayed.
– Hide declined events: will not display events you have received from
others if you have declined them.
– Lock time zone: allows you to lock your time zone, so if you move to
another time zone, times and dates will not change.
– Select time zone: allows you to select the time zone that you want to
keep if you previously activated the Lock time zone option.
– Set alerts & notifications: allows you to set how your alerted for
events. Tap on Alert, Status bar notification, or Off.
– Vibrate: allows you to set the Event notification tone to vibrate Always,
Only in Silent mode or Never.
– Select ringtone: allows you to set the ringtone for the Event notification
tone.
Calendar View Event List
Current Day
Days with
Events for
Events
Previous Month Next Month
Selected Day
Applications 148
Event List
The Event List displays all events that you have added for all
dates in the order that they appear.
1. From the Calendar, tap the List icon.
2. Tap any event to display it.
3. Press to display the following options:
• Edit: allows you the change the Event name, date, time, location,
participants, alarm, alarm details, and description. Tap Save.
• Delete: allows you to delete any event. Tap OK at the prompt.
• Send via: allows you to send event information via Bluetooth or
Messaging.
Camera
Use your 8.0 megapixel camera feature to produce photos in a JPEG
format. Your phone also functions as a Camcorder to take videos.
For more information, refer to “Camera” on page 79.
Clock
The Clock application allows you to access alarms, view the
World Clock, set a stopwatch, and use a timer.
Alarm
This feature allows you to set an alarm to ring at a specific time.
1. From the Home screen, tap ➔ Clock ➔ Alarm ➔
Create alarm. The following options display:
• Time: tap the (+) or (-) to set the new time for the event, at which
time an alarm will sound.
• Alarm repeat: use this option to set the repeating status for the
alarm by tapping one of the following options:
– One-time event: sets the alarm to sound only once.
– Daily: sets the alarm to sound all seven days of the week.
– Every weekday (Mon-Fri): sets the alarm to sound on all five
weekdays.
– Weekly: sets the alarm to sound once every week on the day and
time that is set.
– or –
– Tap on any of the Day abbreviations (S, M, T, W, T, F, S) to set the alarm
to sound on that day.
• Name: allows you to use a specific name for the alarm. The name
will appear on the display when the alarm activates.
• Snooze: use this option to set a Duration (3, 5, 10, 15, or 30
Minutes) and Snooze repeat (1, 2, 3, 5, or 10 Times).
• Smart alarm: tracks body movements and calculates the best time
for sounding the alarm. Place the phone somewhere on your bed
then the phone's movement sensor (also known as accelerometer)
149
is sensitive enough to work from any part of the bed. Set the
Duration and the Tone.
• Alarm type: sets the way in which the alarm sounds when
activated (Melody, Vibration, Vibration and Melody, and Voice).
• Alarm tone: sets the sound file which is played when the alarm is
activated. Select Sounds or Go to My files.
• Alarm volume: drag the slider to adjust the alarm’s volume.
2. Tap Save to store the alarm details.
Turning Off an Alarm
 To stop an alarm when it sounds, touch and sweep the
icon to the right.
Setting the Snooze Feature
 To activate the Snooze feature after an alarm sounds,
touch and sweep the icon to the left. Snooze must
first be set in the alarm settings. For more information,
refer to “Alarm” on page 148.
Deleting Alarms
To delete an alarm, follow these steps:
1. From the Home screen, tap ➔ Clock ➔ Alarm ➔
➔ Delete.
2. Tap the alarm or alarms you wish to delete. A green
checkmark will appear next to each selection.
3. Tap Delete.
World Clock
World Clock allows you to view the time of day or night in other
parts of the world. World Clock displays time in hundreds of
different cities, within all 24 time zones around the world.
1. From the Home screen, tap ➔ Clock ➔ World
clock. The clock for your location is displayed.
2. Tap Add city to add another city to the World Clock.
3. Scroll through the list of cities to find the city you want to
add, or tap the Search bar and use the keypad to enter a
city to search for.
4. Tap the city you want to add. The clock for that city will
display.
5. To set Daylight Savings time, press and hold a city, then
tap DST settings.
6. Select Automatic, Off, 1 hour, or 2 hours.
7. If Daylight Savings Time is selected, the sun symbol on the
World Clock listing will appear orange.
Applications 150
Deleting a World Clock Entry
1. From the Home screen, tap ➔ Clock ➔ World
clock ➔ ➔ Delete.
2. Tap the city clocks you wish to delete.
3. Tap Delete.
Stopwatch
You can use this option to measure intervals of time.
1. From the Home screen, tap ➔ Clock ➔
Stopwatch.
2. Tap Start to start the stopwatch and tap Lap to mark a unit
of time per lap.
3. Tap Stop to stop the stopwatch.
4. Tap Restart to continue or tap Reset to erase all times
recorded.
Timer
You can use this option to set a countdown timer. Use a timer to
count down to an event based on a preset time length (hours,
minutes, and seconds).
1. From the Home screen, tap ➔ Clock ➔ Timer.
2. The min field is highlighted and set to 1 minute. Use the
keypad to set the number of minutes you want.
3. Tap the hr field to set hours if desired. As you tap different
fields, they will become highlighted.
4. Tap the sec field to set seconds.
5. Tap Start to begin the timer and tap Stop to pause the
timer.
6. After stopping, tap Restart to continue or tap Reset to set
the timer back to 1 minute.
Contacts
You can manage your daily contacts by storing their name and
number in your Address Book. Address Book entries can be
sorted by name, entry, or group.
You can also synchronize your phone Address Book with AT&T
Address Book, the network backup service.
For more information, refer to “Contacts and Your Address Book”
on page 60.
151
Email
Email enables you to review and create email using AIM®,
AOL®, Yahoo!® Mail, Comcast, Compuserve, Earthlink, Gmail,
HotPOP, Juno, Mac, NetZero, SBC Yahoo! and several other email
services. You can also receive text message alerts when you
receive an important email. For more information, refer to “Using
Email” on page 96.
Facebook
You can use the Facebook app to go directly to your Facebook
account rather than accessing it from the Browser.
1. From the Home screen, tap ➔ Facebook .
2. The first time you use the application, read the End-User
License Agreement and tap I agree to continue.
3. If you already have a facebook account, tap on the Email
and Password fields and enter your information using the
on-screen keyboard, then tap Login.
– or –
If you don’t have a Facebook account, tap Sign up and
follow the on-screen instructions.
Gallery
The Gallery is where you view photos and play back videos. For
photos, you can also perform basic editing tasks, view a
slideshow, set photos as wallpaper or contact image, and share
as a picture message. For more information, refer to “Gallery”
on page 78.
Gmail
Gmail is a web-based email service. Gmail is configured when
you first set up your phone. Depending on your synchronization
settings, Gmail can automatically synchronize with your Gmail
account on the web. For more information, refer to “Using Gmail”
on page 97.
Google Search
The Google Search Bar provides you an on-screen Internet
search engine powered by Google™. For more information, refer
to “Google Search Bar” on page 26.
Applications 152
Latitude
With Google Latitude, you can see the location of all of your
friends on a map or on a list. You can also share or hide your
location.
You must first set up your tablet to use wireless networks to help
pinpoint your location. Also, Latitude works best when Wi-Fi is
enabled.
For more information, go to http://www.google.com/latitude.
1. From the Home screen, tap ➔ Settings ➔
Location and security.
2. Tap Use wireless networks. A green checkmark indicates
the feature is enabled.
3. Press ➔ Wireless and network ➔ Wi-Fi settings.
4. Tap Wi-Fi to turn Wi-Fi on.
5. Log on to your Google account. For more information, refer
to “Creating a New Google Account” on page 12.
6. Press ➔ ➔ Latitude .
The Friends screen is displayed with any suggested friends
listed.
7. Press ➔ See map.
Your location is displayed on the map, accurate to 30
meters.
Latitude Options
1. Press to display the following options:
• Search: allows you to search for a place of interest.
• Directions: displays navigation directions to a location from a
starting point.
• Starred Places: allows you to see locations you have marked as a
favorite such as restaurants, museums, parks, and so forth. Press
and hold on a location and when the screen displays with the
address, tap the star in the upper-right corner. It will be listed in your
Starred Places.
• Clear Map: allows you to remove all markings and layers from the
map.
• Latitude: lets you and your friends share locations and status
messages with each other. It also lets you send instant messages
and emails, make phone calls, and get directions to your friends’
locations.
• More: allows you to select the following additional options:
– Labs: this is a testing ground for experimental features that aren’t ready
for primetime. They may change, break or disappear at any time. Click
on a Lab to enable or disable it.
153
– Help: displays the Google Mobile Help web page where you can receive
help on Google Maps.
– Terms, Privacy & Notices: displays the Terms and Conditions, Privacy
Policy, o r Legal Notices information. Select the desired information from
the pop-up menu.
– About: displays general information about Google maps such as
Version, Platform, Locale, Total data sent, Total data received, Free
memory, etc.
2. Tap the following icons at the top of the display for the
following additional options:
Live TV
Live TV is a subscription service that allows you to watch your
favorite TV shows using your device. For more information, refer
to “Live TV” on page 77.
Places:
Places is an application that uses Google Maps and
your location to help you find Restaurants, Coffee,
Bars, Hotels, Attractions, ATMs, and Gas Stations. You
can also add your own locations.
Layers:
Layers: are additional items that you can have
displayed on your map. They include:
• Traffic: displays real-time traffic conditions so you
can plan the fastest route.
• Satellite: allows you to see you map as a satellite
image.
• Terrain: allows you to see terrain features such as
hills and mountains.
• Buzz: allows you post public messages and
photos at a location for everyone to see.
• Latitude: allows you to see your friend’s locations
and share your location with them.
• More Layers: allows you to add additional layers
such as My Maps, Bicycling, Wikipedia, Transit
Lines, and Favorite Places.
• Clear Map: allows you to remove all layers from
the map.
My Location:
when selected, your location displays on the map with
a blinking blue arrow.
Applications 154
Maps
Depending on your location, you can view basic, custom, and
satellite maps and local business information, including
locations, contact information, and driving directions. You can
also post public messages about a location and track your
friends.
Important!: Before using Google Maps you must have an active data (3G)
connection. The Maps application does not cover every country
or city.
Enabling a Location Source
Before you use Google Maps and find your location or search for
places of interest, you must enable a location source. To enable
the location source you must enable the wireless network, or
enable the GPS satellites.
1. From the Home screen, tap ➔ Settings ➔
Location and security.
2. Tap the Use GPS satellites field. A green checkmark will
display next to the field.
Note: Selecting Use GPS satellites allows you to locate places of interest at
the street-level. However, this also requires a clear view of the sky and
uses more battery power.
To receive better GPS signals, avoid using your device in the
following conditions:
• inside a building or between buildings
• in a tunnel or underground passage
• in poor weather
• around high-voltage or electromagnetic fields
• in a vehicle with tinted windows
Using Maps
1. From the Home screen, tap ➔ Maps .
A map will display with your location in the very center.
2. Press to display the following options:
• Search: allows you to search for a place of interest.
• Directions: displays navigation directions to a location from a
starting point.
• Starred Places: allows you to see locations you have marked as a
favorite such as restaurants, museums, parks, and so forth. Press
and hold on a location and when the screen displays with the
address, tap the star in the upper-right corner. It will be listed in your
Starred Places.
• Clear Map: allows you to remove all markings and layers from the
map.
• Latitude: lets you and your friends share locations and status
messages with each other. It also lets you send instant messages
155
and emails, make phone calls, and get directions to your friends’
locations.
• More: allows you to select the following additional options:
– Labs: this is a testing ground for experimental features that aren’t ready
for primetime. They may change, break or disappear at any time. Click
on a Lab to enable or disable it.
– Help: displays the Google Mobile Help web page where you can receive
help on Google Maps.
– Terms, Privacy & Notices: displays the Terms and Conditions, Privacy
Policy, o r Legal Notices information. Select the desired information from
the pop-up menu.
– About: displays general information about Google maps such as
Version, Platform, Locale, Total data sent, Total data received, Free
memory, etc.
3. Tap the following icons at the top of the display for the
following additional options:
Places:
Places is an application that uses Google Maps and
your location to help you find Restaurants, Coffee,
Bars, Hotels, Attractions, ATMs, and Gas Stations. You
can also add your own locations.
Layers:
Layers: are additional items that you can have
displayed on your map. They include:
• Traffic: displays real-time traffic conditions so you
can plan the fastest route.
• Satellite: allows you to see you map as a satellite
image.
• Terrain: allows you to see terrain features such as
hills and mountains.
• Buzz: allows you post public messages and
photos at a location for everyone to see.
• Latitude: allows you to see your friend’s locations
and share your location with them.
• More Layers: allows you to add additional layers
such as My Maps, Bicycling, Wikipedia, Transit
Lines, and Favorite Places.
• Clear Map: allows you to remove all layers from
the map.
My Location:
when selected, the location displays on the map with
a blinking blue arrow.
Applications 156
Market
Android Market provides access to downloadable applications
and games to install on your phone. Android Market also allows
you to provide feedback and comments about an application, or
flag an application that might be incompatible with your phone.
Before using the Android Market you must have a Google
Account. For more information, refer to “Using Gmail” on
page 97.
1. From the main Home screen, tap Market .
Note: The main Home screen initially contains the Market icon. If you
delete it, or if you want to access Messaging from another Home
screen, you must tap Applications ➔ Market .
2. Sign in to your Google account if you have not already done
so. If you don’t have a Google account set up, see
“Creating a New Google Account” on page 12.
3. The first time you sign in, the Android Market Terms of
Service will be displayed. Tap Accept to continue or Decline
to exit.
4. Tap Apps, Games, or AT&T to download or purchase games
or applications. You can also download updates to existing
applications.
5. Follow on the on-screen instructions.
Note: To use any downloaded market application that requires a USB
connection between your phone and your PC, you should first set the
USB setting to Mass storage. For more information, refer to “USB
Settings” on page 116.
Media Hub
Samsung Media Hub is your one stop for the hottest movie and
TV content. You can rent or purchase your favorite content and
watch from the convenience of anywhere.
For more information, refer to “Media Hub” on page 73.
Memo
This feature allows you to create a memo and send it via
Bluetooth or Messaging.
1. From the Home screen, tap ➔ Memo ➔ Create
memo.
2. Type your Memo using the keypad and tap Save.
The memo will display in the memo list.
3. To send a Memo, touch and hold the Memo in the Memo
list.
4. Tap Send via.
157
5. Tap Bluetooth or Messaging.
6. Enter the recipient information and tap Send. For more
information, refer to “Message Options” on page 92.
7. To modify a Memo, tap the pencil icon in the top left corner
of the Memo. Edit the Memo then tap Save.
8. You can change the color or your Memo by simply tapping
a color sample at the bottom of the display.
9. From the Memo list, press to display the following
options:
• Create: allows you to create a new memo.
• Maximize/Minimize: in the Memo list, allows you to see the entire
contents of your memos. Otherwise, only the first line will be
displayed for each memo in your list.
• Delete: allows you to delete one or all of your memos.
• Search: allows you to search your memos for a particular word or
words.
Messaging
The Messaging feature allows you to send text messages and
multimedia messages to other phones and email addresses. For
more information, refer to “Creating and Sending Messages” on
page 91.
Mini Diary
The Mini Diary allows you to keep a diary of your daily activities
and also attach pictures. You can publish your diary entries to
Facebook and MySpace.
1. From the Home screen, tap ➔ Mini Diary .
2. Tap Create diary to start a new diary entry.
3. Tap the Tap to add photo field to add a photo.
4. To take a new picture, tap Camera. To add a photo from
your Gallery, tap Images.
5. Tap the Tap to create memo field to add a memo.
6. Use the on-screen keypad to enter a memo then tap Done.
7. Tap Save.
8. The dairy entry will be added to your Mini Diary with
today’s date.
9. While in a diary entry, press to display the following
options:
• Create: allows you to create a new diary entry.
• Delete: allows you to delete a diary entry.
• Change photo: allows you to change the photo. This option only
displays if you have already attached a photo.
Applications 158
• Delete photo: allows you to delete the photo. This option only
displays if you have already attached a photo.
• Publish: allows you to publish your diary entry to Facebook or
MySpace.
10. At the Mini Diary screen, press to display the
following options:
• Delete all: allows you to delete all diary entries.
• Settings: allows you to enter a Selected city for your location and
also select Auto update which will update your Selected city based
on GPS.
Music Player
Music Player allows you to play music files that you have stored
on your memory card. You can also create playlists. For more
information, refer to “Music Player” on page 74.
My Files
My Files allows you to manage your sounds, images, videos,
bluetooth files, Android files, and other memory card data in one
convenient location.
1. From the Home screen, tap ➔ My Files .
2. The following folders display:
• DCIM: this is the default location for pictures and videos taken by
the device. Tap DCIM ➔ Camera to view the picture or video files.
For more information, refer to “Accessing Pictures” on
page 85. Also, see “Accessing Videos” on page 89.
• Android: the Android folder stores files that are used in Android
applications.
• external_sd: this folder displays all of the files that you have on
your memory card.
• bluetooth: this folder stores files sent via a Bluetooth device.
Note: Other folders may be displayed depending on the applications that you
have on your phone.
myAT&T
MyAT&T allows you to manage your own AT&T account. You can
review and pay your bill, check minutes and data usage, upgrade
to a new device, or change your rate plan.
Initial Setup
1. From the Home screen, tap ➔ myAT&T .
2. Sign into your Google Account. If you haven’t set up an
account, see “Creating a New Google Account” on
page 12.
3. After signing into your Google Account, the Android Market
displays the myAT&T application. Tap the application.
4. Tap Install.
159
5. Follow the on-screen instructions.
Using myAT&T
1. From the Home screen, tap ➔ myAT&T .
The myWireless Mobile page is displayed.
2. Read the Terms and Conditions and tap Accept to continue.
3. Enter your Wireless # and Password using the onscreen
keypad, then tap Login.
4. Follow the on-screen instructions.
Navigation
Navigation is an internet-connected GPS navigation system with
voice guidance. You can type or speak your destination.
Note: For voice-guided navigation, you need to install text-to-speech support
from the Android Market.
To receive better GPS signals, avoid using your device in the
following conditions:
• inside a building or between buildings
• in a tunnel or underground passage
• in poor weather
• around high-voltage or electromagnetic fields
• in a vehicle with tinted windows
Launching Navigation
1. From the Home screen, tap ➔ Navigation .
2. Read the Navigation information page and tap Accept to
continue or Don’t Accept to exit.
The Choose Destination screen displays.
3. On the top left side of the screen, the Driving icon is
displayed. If you are walking, tap the Driving icon and
select Walking. The Walking icon is now displayed.
4. Select one of the following options:
• Speak Destination: allows you to speak your destination.
• Type Destination: allows you to use the keypad to enter your
destination.
• Contacts: displays a list of all of your contacts that have addresses
listed.
• Starred Places: allows you to keep a list of favorite destinations,
locations, restaurants, etc. Just tap a starred item to get directions.
• Recent Destinations: allows you to access information on previous
destinations you have used. This option only appears after you have
entered one or more destinations.
5. After entering an address, the Complete action using
screen displays. Tap either AT&T Navigator or Navigation to
complete your directions request.
Applications 160
For more information, refer to “AT&T Navigator” on
page 144. Also, see “Navigation” on page 159.
News & Weather
The News & Weather application allows you to view the news
and weather in your area.
1. From the Home screen, tap ➔ News & Weather .
The Weather screen is displayed with current temperature,
conditions, Humidity, and Wind speed.
2. Tap the temperature to display a graph mapping the days
temperature and humidity.
3. While on the Weather screen, press to display the
following options:
• Refresh: allows you to refresh the screen. Your location and the
weather is updated if there have been any changes.
• Settings: allows you to set weather, news, and refresh settings.
– Weather settings: allows you to choose location(s) and set the metric
for temperature displays.
– News settings: allows you to choose topics, configure settings for
fetching articles and images, and view the terms of service for news
service.
– Refresh settings: allows you to choose options for updating content.
– Application version: displays the application version number.
4. To view the news, sweep the screen to the left to display
Top Stories, U.S., Sports, and Entertainment.
Places
Places is an application that uses Google Maps and your location
to help you find Restaurants, Coffee, Bars, Hotels, Attractions,
ATMs, and Gas Stations. You can also add your own locations.
The Places application allows you to find the best sources for
business information across the web, including business listing
details, reviews, photos, nearby public transit, and other related
information. Business owners can provide additional details, like
photos, hours of operation, and coupons.
1. From the Home screen, tap ➔ Places .
2. Tap on one of the business categories or tap on Find places
to search for a particular business.
All of the businesses that are close to you will be
displayed.
3. Tap on a business that you want to see the details for.
4. The business details such as address, phone, website, and
location are displayed. You can also see reviews from
around the web and from Google users.
Now is the time for all good
men to come to the aid of their
country. The quick brown fox
jumps over the lazy dog.
161
5. From the Places main page, tap Add to add your own
business category.
Quickoffice
The Quickoffice application allows you to create and save
Microsoft Word and Excel documents. You can also view existing
Powerpoint presentations and PDFs.
1. From the Home screen, tap ➔ Quickoffice .
2. The first time you use Quickoffice, you should register your
software. Tap the Name field, then use the key pad to enter
your name.
3. Tap the E-mail Address field, then use the keypad to enter
your E-mail address.
4. Tap Register Now.
The Quickoffice screen is displayed.
5. The following Quickoffice applications are available:
• Quickword: allows you to create and save Word documents on
your tablet. you can also access Word documents from your SD
card and your Recent Documents folder.
• Quicksheet: allows you to create and save Excel spreadsheet
documents.
• Quickpoint: allows you to view existing Powerpoint documents
from your SD card and your Recent Documents folder.
• QuickPDF: allows you to view existing PDF documents from your
SD card and your Recent Documents folder.
6. Select an application and follow the on-screen
instructions.
7. The following options are available:
• Browse: allows you to browse your SD card and Recent
Documents folder for existing files and documents.
• Search: allows you to search your SD card and Recent Documents
folder for existing files and documents.
• Accounts: allows you to view your accounts and add new ones.
You can add accounts such as Google Docs, Dropbox, box, and
mobileme.
• Update: allows you to check for Quickoffice application updates.
• Support: displays the Quickoffice web site here you can access the
User Guide, view Frequently Asked Questions (FAQs), and Submit a
Support Ticket.
• Explore: displays the Quickoffice Explore web site where you can
Follow social networks, subscribe to the Quickoffice Newsletter, and
provide feedback.
Applications 162
Settings
This widget navigates to the sound and phone settings for your
phone. It includes such settings as: display, security, memory,
and any extra settings associated with your phone. For more
information, refer to “Changing Your Settings” on page 100.
Talk
Google Talk is a free Windows and web-based application for
instant messaging offered by Google. Conversation logs are
automatically saved to a Chats area in your Gmail account. This
allows you to search a chat log and store them in your Gmail
accounts. For more information, refer to “Google Talk” on
page 99.
Task Manager
The Task Manager application provides information about the
processes and programs running on your tablet, as well as the
memory status. It can also be used to terminate processes and
applications.
To access the Task Manager, follow these steps:
1. From the Home screen, tap ➔ Task Manager .
2. The Task Manager options are located at the top of the
screen. The following options are available:
• Active applications: displays all of the applications that are
presently running on your tablet. Tap End to end an application, or
tap End all to end all running applications.
• Package: displays the size of the application program packages.
• RAM manager: displays the Random Access Memory (RAM) and
allows you to clear different levels of RAM.
• Summary: displays a summary of the tablet’s memory usage.
• Help: displays information on how to extend battery life.
Video Player
The Video Player application plays video files stored on your
memory card. For more information, refer to “Video Player” on
page 77.
Voice Recorder
The Voice Recorder allows you to record an audio file up to one
minute long and then immediately share it using AllShare,
Messaging, Gmail, or via Bluetooth. Recording time will vary
based on the available memory within the phone.
1. From the Home screen, tap ➔ Voice Recorder .
2. To start recording, tap and speak into the
microphone.
163
3. During the recording process you can either tap Stop
to stop and save the recording or Pause
to temporarily halt the recording. After pausing,
tap to resume recording. Once the audio
recording has stopped, the message is automatically
saved.
4. Tap to display a list of all your voice recordings.
Tap a voice recording to play it.
5. Press to display the following options:
• Share: allows you to share your recording using Messaging,
Bluetooth, Email, or Gmail.
• Delete: allows you to delete 1 or more voice recordings. Tap the
recordings to delete and tap Done.
• Rename: allows you to rename your recordings.
• Settings: the following settings are available:
– Storage: allows you to choose where your recordings will be saved.
Select between Phone or memory card.
– Default name: allows you to choose the name prefix for your
recordings. For example, if your Default name is Voice, your recordings
would be named Voice 001, Voice 002, Voice 003, etc.
– Recording time: allows you to select No limit or Limit for MMS. If you
Limit for MMS, you will be assured that the recording can be sent in a
message.
Voice Search
The Voice Search feature is a voice-activated application that
allows you to tell the phone what to search for and then the
phone activates a Google search based on what you said.
1. From the Home screen, tap ➔ Voice Search .
– or –
From the main Home screen, tap on the right side of
the Google Search bar.
2. Tap Speak Now then speak clearly into the microphone.
3. The Working screen will display as it searches for you.
4. Results will display on the screen. Tap a link to view the
information.
– or –
The No matches found screen will display if Voice Search
was not able to find a match. Tap Try again or Cancel.
Applications 164
Write and Go
Use Write and Go to jot down an idea, then decide what format
you want to use to save, send, or post it. You can send as a
message, send to your Gmail account, update your Facebook,
MySpace or Twitter accounts, or save it in the Calendar or as a
memo.
1. From the Home screen, tap ➔ Write and go .
2. Compose the text then select one of the following:
• Send: sends as a Message or sends to an email account.
• Update status: posts this text to your Facebook, MySpace, or
Twitter account (you must log into the account first).
• Save: saves the text to your Calendar or as a Memo.
YouTube
YouTube™ is a video sharing website on which users can upload
and share videos. The site is used to display a wide variety of
user-generated video content, including movie clips, TV clips,
and music videos, as well as video content such as video
blogging, informational shorts and other original videos.
Note: YouTube is a data-intensive feature. It is recommended that you
upgrade to an unlimited data plan to avoid additional data charges.
1. From the Home screen, tap ➔ YouTube .
2. Tap the search field to search for specific videos,
scroll down to browse through the main page thumbnails,
or scroll to the bottom to explore additional options.
3. To view a video, tap an available preview thumbnail or tap
the title link.
Note: It is not necessary to sign in to the YouTube site to view content.
However, if you wish to sign in to access additional options, access the
page via the Web browser and tap Sign in at the top right corner, enter
your YouTube or Google username and password, and tap Sign in.
YPmobile
The Yellowpages Mobile application provides quick and ready
access to businesses, map locations, and storage of your favorite
searches. This application allows you to tap into local
businesses, locations, and events, connecting you to your search
in real-time.
1. From the Home screen, tap ➔ YPmobile .
2. Read the End-User License Agreement (EULA) and tap
Accept or press to go back.
3. Your location is found using GPS.
165
4. Tap the globe symbol ( ) to display a map of your
present location.
5. Enter a subject or business name, city, and state in the
search field and tap Search.
– or –
Tap to use the voice search feature.
6. Results will be displayed and locations marked with pins
on the map.
7. If more than one result is found, tap the arrow keys to see
the next location found.
8. Tap to display the list view of the locations found.
9. Tap a location to see the address, phone number, and
reviews. You can also Share, Add to Favorites, and Add to
Contacts.
10. Tap to display the following options:
• Businesses: search for businesses in your local area.
• Events: search for events that are taking place in your local area.
• Browse: allows you to browse popular businesses and categories.
• Favorites: allows you to view businesses or events that you have
marked as favorites.
Health and Safety Information 166
Section 11: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. The terms “mobile device” or “cell phone” are used
in this section to refer to your phone. Read this information before
using your mobile device.
Exposure to Radio Frequency (RF) Signals
The U.S. Food and Drug Administration (FDA) has published
information for consumers relating to Radio Frequency (RF)
exposure from wireless phones. The FDA publication includes the
following information:
Do cell phones pose a health hazard?
Many people are concerned that cell phone radiation will cause
cancer or other serious health hazards. The weight of scientific
evidence has not linked cell phones with any health problems.
Cell phones emit low levels of Radio Frequency (RF) energy. Over
the past 15 years, scientists have conducted hundreds of studies
looking at the biological effects of the radio frequency energy
emitted by cell phones. While some researchers have reported
biological changes associated with RF energy, these studies have
failed to be replicated. The majority of studies published have
failed to show an association between exposure to radio
frequency from a cell phone and health problems.
The low levels of RF cell phones emit while in use are in the
microwave frequency range. They also emit RF at substantially
reduced time intervals when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating effects
causes no known adverse health effects.
The biological effects of radio frequency energy should not be
confused with the effects from other types of electromagnetic
energy.
Very high levels of electromagnetic energy, such as is found in
X-rays and gamma rays, can ionize biological tissues. Ionization
is a process where electrons are stripped away from their normal
locations in atoms and molecules. It can permanently damage
biological tissues including DNA, the genetic material.
The energy levels associated with radio frequency energy,
including both radio waves and microwaves, are not great
enough to cause ionization of atoms and molecules. Therefore,
RF energy is a type of non-ionizing radiation. Other types of
non-ionizing radiation include visible light, infrared radiation
(heat), and other forms of electromagnetic radiation with
relatively low frequencies.
167
While RF energy does not ionize particles, large amounts can
increase body temperatures and cause tissue damage. Two
areas of the body, the eyes and the testes, are particularly
vulnerable to RF heating because there is relatively little blood
flow in them to carry away excess heat.
Research Results to Date: Is there a connection between
RF and certain health problems?
The results of most studies conducted to date say no. In addition,
attempts to replicate and confirm the few studies that have
shown a connection have failed.
The scientific community at large therefore believes that the
weight of scientific evidence does not show an association
between exposure to Radio Frequency (RF) from cell phones and
adverse health outcomes. Still the scientific community has
supported additional research to address gaps in knowledge.
Some of these studies are described below.
Interphone Study
Interphone is a large international study designed to determine
whether cell phones increase the risk of head and neck cancer. A
report published in the International Journal of Epidemiology
(June, 2010) compared cell phone usage for more than 5,000
people with brain tumors (glioma and meningioma) and a similar
number of healthy controls.
Results of this study did NOT show that cell phones caused brain
cancer. In this study, most people had no increased risk of brain
cancer from using cell phones. For people with the heaviest use
of cell phones (an average of more than ½ hour per day, every
day, for over 10 years) the study suggested a slight increase in
brain cancer. However, the authors determined that biases and
errors prevented any conclusions being drawn from this data.
Additional information about Interphone can be found at
http://com.iarc.fr/en/media-centre/pr/.
Interphone is the largest cell phone study to date, but it did not
answer all questions about cell phone safety. Additional research
is being conducted around the world, and the FDA continues to
monitor developments in this field.
International Cohort Study on Mobile Phone Users (COSMOS)
The COSMOS study aims to conduct long-term health monitoring
of a large group of people to determine if there are any health
issues linked to long-term exposure to radio frequency energy
from cell phone use. The COSMOS study will follow
approximately 300,000 adult cell phone users in Europe for 20 to
30 years. Additional information about the COSMOS study can be
found at http://www.ukcosmos.org/index.html.
Health and Safety Information 168
Risk of Brain Cancer from Exposure to Radio Frequency Fields
in Childhood and Adolescence (MOBI-KIDS)
MOBI-KIDS is an international study investigating the relationship
between exposure to radio frequency energy from
communication technologies including cell phones and brain
cancer in young people. This is an international multi-center
study involving 14 European and non-European countries.
Additional information about MOBI-KIDS can be found at
http://www.creal.cat/programes-recerca/en_projectes-creal/
view.php?ID=39.
Surveillance, Epidemiology, and End Results (SEER) Program
of the National Cancer Institute
The National Cancer Institute (NCI) actively follows cancer
statistics in the United States to detect any change in rates of
new cases for brain cancer. If cell phones play a role in risk for
brain cancer, rates should go up, because heavy cell phone use
has been common for quite some time in the U.S. Between 1987
and 2005, the overall age-adjusted incidence of brain cancer did
not increase. Additional information about SEER can be found at
http://seer.cancer.gov/.
Cell Phone Industry Actions
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the cell phone industry to take a
number of steps, including the following:
• Support-needed research on possible biological effects of RF for
the type of signal emitted by cell phones;
• Design cell phones in a way that minimizes any RF exposure to the
user; and
• Cooperate in providing users of cell phones with the current
information on cell phone use and human health concerns.
The FDA also is working with voluntary standard-setting bodies
such as the Institute of Electrical and Electronics Engineers
(IEEE), the International Commission on Non-Ionizing Radiation
Protection (ICNIRP), and others to assure that safety standards
continue to adequately protect the public.
Reducing Exposure: Hands-Free Kits and Other
Accessories
Steps to Reduce Exposure to Radio Frequency Energy
If there is a risk from being exposed to radio frequency energy
(RF) from cell phones - and at this point we do not know that
there is - it is probably very small. But, if you are concerned
about avoiding even potential risks, you can take a few simple
steps to minimize your RF exposure.
• Reduce the amount of time spent using your cell phone;
• Use speaker mode or a headset to place more distance between your
head and the cell phone.
169
Hands-Free Kits
Hands-free kits may include audio or Bluetooth® headsets and
various types of body-worn accessories such as belt-clips and
holsters. Combinations of these can be used to reduce RF energy
absorption from cell phones.
Headsets can substantially reduce exposure because the phone
is held away from the head in the user's hand or in approved
body-worn accessories. Cell phones marketed in the U.S. are
required to meet RF exposure compliance requirements when
used against the head and against the body.
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that hands-free
kits reduce risks. Hands-free kits can be used for convenience
and comfort. They are also required by law in many states if you
want to use your phone while driving.
Cell Phone Accessories that Claim to Shield the Head from
RF Radiation
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that accessories
which claim to shield the head from those emissions reduce
risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike “hands-free” kits, these so-called “shields”
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption.
Children and Cell Phones
The scientific evidence does not show a danger to any users of
cell phones from RF exposure, including children and teenagers.
The steps adults can take to reduce RF exposure apply to
children and teenagers as well.
• Reduce the amount of time spent on the cell phone;
• Use speaker mode or a headset to place more distance between the
head and the cell phone.
Some groups sponsored by other national governments have
advised that children be discouraged from using cell phones at
all. For example, The Stewart Report from the United Kingdom
made such a recommendation in December 2000. In this report,
a group of independent experts noted that no evidence exists that
using a cell phone causes brain tumors or other ill effects. Their
recommendation to limit cell phone use by children was strictly
precautionary; it was not based on scientific evidence that any
health hazard exists.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(updated 10/1/2010):
Health and Safety Information 170
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/.
• Environmental Protection Agency (EPA):
http://www.epa.gov/radtown/wireless-tech.html.
• Occupational Safety and Health Administration (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/.
(Note: This web address is case sensitive.)
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/.
• World Health Organization (WHO):
http://www.who.int/peh-emf/en/.
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de.
• Health Protection Agency:
http://www.hpa.org.uk/Topics/Radiation/.
• US Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/
RadiationEmittingProductsandProcedures/
HomeBusinessandEntertainment/CellPhones/default.htm.
Specific Absorption Rate (SAR) Certification
Information
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
Radio Frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government.
These FCC exposure limits are derived from the
recommendations of two expert organizations: the National
Council on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
171
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body-worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the mobile device a
minimum of 1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
GSM 850
• Head: 0.20 W/Kg.
• Body-worn: 1.26 W/Kg.
GSM 1900
• Head: 0.13 W/Kg.
• Body-worn: 0.74 W/Kg.
UMTS II
• Head: 0.18 W/Kg.
• Body-worn: 0.71 W/Kg.
UMTS V
• Head: 0.13 W/Kg.
• Body-worn: 0.51 W/Kg.
2.4 GHz WLAN
• Head: 0.04 W/Kg.
• Body-worn: 0.05 W/Kg.
5.2 GHz WLAN
• Head: 0.10 W/Kg.
• Body-worn: 0.01 W/Kg.
5.3 GHz WLAN
• Head: 0.10 W/Kg.
• Body-worn: 0.02 W/Kg.
5.5 GHz WLAN
• Head: 0.16 W/Kg.
• Body-worn: 0.03 W/Kg.
5.8 GHz WLAN
• Head: 0.20 W/Kg.
• Body-worn: 0.05 W/Kg.
Health and Safety Information 172
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Smart Practices While Driving
On the Road - Off the Phone
The primary responsibility of every driver is the safe operation of
his or her vehicle.
Responsible drivers understand that no secondary task should be
performed while driving whether it be eating, drinking, talking to
passengers, or talking on a mobile phone - unless the driver has
assessed the driving conditions and is confident that the
secondary task will not interfere with their primary responsibility.
Do not engage in any activity while driving a moving vehicle which
may cause you to take your eyes off the road or become so
absorbed in the activity that your ability to concentrate on the act
of driving becomes impaired. Samsung is committed to promoting
responsible driving and giving drivers the tools they need to
understand and address distractions.
Check the laws and regulations on the use of mobile devices and
their accessories in the areas where you drive. Always obey them.
The use of these devices may be prohibited or restricted in certain
areas. For example, only hands-free use may be permitted in
certain areas.
Before answering calls, consider your circumstances. Let the call
go to voicemail when driving conditions require. Remember,
driving comes first, not the call!
If you consider a call necessary and appropriate, follow these
tips:
• Use a hands-free device;
• Secure your phone within easy reach;
• Place calls when you are not moving;
• Plan calls when your car will be stationary;
• Do not engage in stressful or emotional conversations;
• Let the person with whom you are speaking know that you are driving
and will suspend the call if necessary;
• Do not take notes or look up phone numbers while driving;
Notice regarding legal restrictions on mounting this device in an
automobile:
Laws in some states may prohibit mounting this device on or
near the windshield of an automobile. In other states, the law
may permit mounting this device only in specific locations in the
173
automobile. Be sure to consult the state and local laws or
ordinances where you drive before mounting this device in an
automobile. Failure to comply with these restrictions could result
in fines, penalties, or other damages.
Never mount this device in a manner that will obstruct the
driver's clear view of the street and traffic.
Never use wireless data services such as text messaging, Web
browsing, or e-mail while operating a vehicle.
Never watch videos, such as a movie or clip, or play video games
while operating a vehicle.
For more information, go to http://www.ctia.org.
Battery Use and Safety
Important!: Handle and store batteries properly to avoid injury or damage.
Most battery issues arise from improper handling of batteries
and, particularly, from the continued use of damaged batteries.
• Do not disassemble, crush, puncture, shred, or otherwise attempt
to change the form of your battery. Do not put a high degree of
pressure on the battery. This can cause leakage or an internal shortcircuit, resulting in overheating.
• Do not let the phone or battery come in contact with liquids.
Liquids can get into the phone's circuits, leading to corrosion. Even
when the phone appears to be dry and appears to operate normally,
the circuitry could slowly corrode and pose a safety hazard. If the
phone and/or battery get wet, have them checked by your service
provider or contact Samsung, even if they appear to be working
properly.
• Do not place your battery in or near a heat source. Excessive
heating can damage the phone or the battery and could cause the
phone or the battery to explode. Do not dry a wet or damp battery with
an appliance or heat source such as a microwave oven, hair dryer,
iron, or radiator. Avoid leaving your phone in your car in high
temperatures.
• Do not dispose of the phone or the battery in a fire. The phone or
the battery may explode when overheated.
• Do not handle a damaged or leaking battery. Do not let leaking
battery fluid come in contact with your eyes, skin or clothing. For safe
disposal options, contact your nearest Samsung-authorized service
center.
• Avoid dropping the cell phone. Dropping the phone or the battery,
especially on a hard surface, can potentially cause damage to the
phone and battery. If you suspect damage to the phone or battery, take
it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Do not allow the battery to touch metal objects. Accidental
short-circuiting can occur when a metallic object (coin, key, jewelry,
clip, or pen) causes a direct connection between the + and - terminals
of the battery (metal strips on the battery), for example when you carry
Health and Safety Information 174
a spare battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
Important!: Use only Samsung-approved batteries, and recharge your battery
only with Samsung-approved chargers which are specifically
designed for your phone.
Warning!: Use of a non-Samsung-approved battery or charger may present a
risk of fire, explosion, leakage, or other hazard. Samsung's
warranty does not cover damage to the phone caused by nonSamsung-approved batteries and/or chargers.
• Do not use incompatible cell phone batteries and chargers. Some
websites and second-hand dealers not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier-recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging
devices could result in damage to the equipment and a possible
risk of fire, explosion, or leakage, leading to serious injuries,
damages to your phone, or other serious hazard.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile devices and genuine
Samsung accessories.
Proper disposal of your mobile device and its battery is not only
important for safety, it benefits the environment. Batteries must
be recycled or disposed of properly.
Recycling programs for your mobile device, batteries, and
accessories may not be available in your area.
We've made it easy for you to recycle your old Samsung mobile
device by working with respected take-back companies in every
state in the country.
Drop It Off
You can drop off your Samsung-branded mobile device and
batteries for recycling at one of our numerous Samsung
Recycling Direct (SM) locations. A list of these locations may be
found at: http://pages.samsung.com/us/recyclingdirect/
usactivities_environment_samsungrecyclingdirect_locations.jsp.
Samsung-branded devices and batteries will be accepted at
these locations for no fee.
Consumers may also recycle their used mobile device or
batteries at many retail or carrier-provided locations where
mobile devices and batteries are sold. Additional information
175
regarding specific locations may be found at:
http://www.epa.gov/epawaste/partnerships/plugin/cellphone/
index.htm or at http://www.call2recycle.org/.
Mail It In
The Samsung Mobile Take-Back Program will provide Samsung
customers with a free recycling mailing label. Just go to
http://www.samsung.com/us/aboutsamsung/citizenship/
usactivities_environment_samsungrecyclingdirect.html?INT=STA_rec
yle_your_phone_page and follow the instructions to print out a
free pre-paid postage label and then send your old mobile
device or battery to the address listed, via U.S. Mail, for
recycling.
Follow local regulations regarding disposal of mobile devices
and batteries
Dispose of your mobile device and batteries in accordance with
local regulations. In some areas, the disposal of these items in
household or business trash may be prohibited. Help us protect
the environment - recycle!
Warning!: Never dispose of batteries in a fire because they may explode.
UL Certified Travel Charger
The Travel Charger for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines:
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE
PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH
AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
THIS POWER UNIT IS INTENDED TO BE CORRECTLY
ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR
MOUNT POSITION.
Health and Safety Information 176
Display / Touch-Screen
Please note the following information when using your mobile
device:
WARNING REGARDING DISPLAY
The display on your mobile device is made of glass or
acrylic and could break if your mobile device is dropped or
if it receives significant impact. Do not use if screen is
broken or cracked as this could cause injury to you.
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN
MOBILE DEVICE
If your mobile device has a touch-screen display, please
note that a touch-screen responds best to a light touch
from the pad of your finger or a non-metallic stylus. Using
excessive force or a metallic object when pressing on the
touch-screen may damage the tempered glass surface
and void the warranty. For more information, refer to
“Standard Limited Warranty” on page 186.
GPS & AGPS
Certain Samsung mobile devices can use a Global Positioning
System (GPS) signal for location-based applications. A GPS uses
satellites controlled by the U.S. Government that are subject to
changes implemented in accordance with the Department of
Defense policy and the 2008 Federal Radio navigation Plan (FRP).
Changes may affect the performance of location-based
technology on your mobile device.
Certain Samsung mobile devices can also use an Assisted Global
Positioning System (AGPS), which obtains information from the
cellular network to improve GPS performance. AGPS uses your
wireless service provider's network and therefore airtime, data
charges, and/or additional charges may apply in accordance with
your service plan. Contact your wireless service provider for
details.
Your Location
Location-based information includes information that can be
used to determine the approximate location of a mobile device.
Mobile devices which are connected to a wireless network
transmit location-based information. Additionally, if you use
applications that require location-based information (e.g. driving
directions), such applications transmit location-based
information. The location-based information may be shared with
third-parties, including your wireless service provider,
177
applications providers, Samsung, and other third-parties
providing services.
Use of AGPS in Emergency Calls
When you make an emergency call, the cellular network may
activate AGPS technology in your mobile device to tell the
emergency responders your approximate location.
AGPS has limitations and might not work in your area. Therefore:
• Always tell the emergency responder your location to the best of your
ability; and
• Remain on the mobile device for as long as the emergency responder
instructs you.
Navigation
Maps, directions, and other navigation data may contain
inaccurate or incomplete data, and circumstances can and do
change over time. In some areas, complete information may not
be available. Therefore, you should always visually confirm that
the navigational instructions are consistent with what you see
before following them. All users should pay attention to road
conditions, closures, traffic, and all other factors that may impact
safe driving or walking. Always obey posted road signs.
Emergency Calls
This mobile device, like any wireless mobile device, operates
using radio signals, wireless and landline networks, as well as
user-programmed functions, which cannot guarantee connection
in all conditions, areas, or circumstances. Therefore, you should
never rely solely on any wireless mobile device for essential
communications (medical emergencies, for example). Before
traveling in remote or underdeveloped areas, plan an alternate
method of contacting emergency services personnel. Remember,
to make or receive any calls, the mobile device must be switched
on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless mobile
device networks or when certain network services and/or mobile
device features are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. From the Home screen, tap . The dialer is displayed.
3. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
4. Tap the key.
Health and Safety Information 178
If certain features are in use (call blocking, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult your User Manual and your local cellular
service provider. When making an emergency call, remember to
give all the necessary information as accurately as possible.
Remember that your mobile device may be the only means of
communication at the scene of an accident; do not cut off the call
until given permission to do so.
Care and Maintenance
Your mobile device is a product of superior design and
craftsmanship and should be treated with care. The suggestions
below will help you fulfill any warranty obligations and allow you
to enjoy this product for many years:
Keep your Samsung Mobile Device away from:
Liquids of any kind
Keep the mobile device dry. Precipitation, humidity, and liquids
contain minerals that will corrode electronic circuits. If the
mobile device does get wet, do not accelerate drying with the
use of an oven, microwave, or dryer, because this may damage
the mobile device and could cause a fire or explosion. Do not
use the mobile device with a wet hand. Doing so may cause an
electric shock to you or damage to the mobile device.
Extreme heat or cold
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.
Microwaves
Do not try to dry your mobile device in a microwave oven.
Doing so may cause a fire or explosion.
Dust and dirt
Do not expose your mobile device to dust, dirt, or sand.
Cleaning solutions
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the mobile device. Wipe it with a soft cloth
slightly dampened in a mild soap-and-water solution.
Shock or vibration
Do not drop, knock, or shake the mobile device. Rough
handling can break internal circuit boards.
Paint
Do not paint the mobile device. Paint can clog the device’s
moving parts or ventilation openings and prevent proper
operation.
179
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cell phones, at high volume settings for long durations may lead
to permanent noise-induced hearing loss. This includes the use
of headphones (including headsets, earbuds, and Bluetooth® or
other wireless devices). Exposure to very loud sound has also
been associated in some studies with tinnitus (a ringing in the
ear), hypersensitivity to sound, and distorted hearing. Individual
susceptibility to noise-induced hearing loss and potential hearing
problem varies. Additionally, the amount of sound produced by a
portable audio device varies depending on the nature of the
sound, the device settings, and the headphones that are used. As
a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings, and
equipment.
You should follow some common sense recommendations when
using any portable audio device:
• Always turn the volume down before plugging the earphones into an
audio source.
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• Be aware that you can adapt to higher volume settings over time, not
realizing that the higher volume may be harmful to your hearing.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech, or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
Health and Safety Information 180
You can obtain additional information on this subject from the
following sources:
Operating Environment
Remember to follow any special regulations in force in any area,
and always switch your mobile device off whenever it is
forbidden to use it, or when it may cause interference or danger.
When connecting the mobile device or any accessory to another
device, read its user's guide for detailed safety instructions. Do
not connect incompatible products.
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org/Pages/default.aspx
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/
National Institute for Occupational Safety and Health (NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4674)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: cdcinfo@cdc.gov
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
1-888-232-6348 TTY
181
Using Your Mobile Device Near Other Electronic Devices
Most modern electronic equipment is shielded from Radio
Frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
mobile device. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless mobile device and an implantable
medical device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the mobile device more than six (6) inches from
their implantable medical device when the mobile device is turned ON;
• Should not carry the mobile device in a breast pocket;
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the mobile device OFF immediately if there is any reason
to suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless mobile device with an implantable medical device,
consult your health care provider.
For more information see: http://www.fcc.gov/oet/rfsafety/rffaqs.html#.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your mobile
device off in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle before
using your mobile device in a motor vehicle. You should also
consult the manufacturer of any equipment that has been added
to your vehicle.
Posted Facilities
Switch your mobile device off in any facility where posted notices
require you to do so.
Health and Safety Information 182
Potentially Explosive Environments
Switch your mobile device off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death. Users are advised to switch the mobile
device off while at a refueling point (service station). Users are
reminded of the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution areas),
chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
FCC Hearing Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless mobile devices under the Hearing Aid
Compatibility Act of 1988 (HAC Act) to require digital wireless
mobile devices be compatible with hearing aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities. While some wireless mobile devices are used near
some hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and mobile devices also vary in the amount of
interference they generate.
The wireless telephone industry has developed a rating system
for wireless mobile devices to assist hearing device users find
mobile devices that may be compatible with their hearing
devices. Not all mobile devices have been rated. Mobile devices
that are rated have the rating on their box or a label located on
the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated mobile device successfully. Trying out the mobile
device with your hearing device is the best way to evaluate it for
your personal needs.
M-Ratings: Mobile devices rated M3 or M4 meet FCC
requirements and are likely to generate less interference to
hearing devices than mobile devices that are not labeled. M4 is
the better/higher of the two ratings.
183
T-Ratings: Mobile devices rated T3 or T4 meet FCC requirements
and are likely to generate less interference to hearing devices
than mobile devices that are not labeled. T4 is the better/higher
of the two ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless mobile device rating values are then added together.
A sum of 5 is considered acceptable for normal use. A sum of 6
is considered for best use. If a hearing aid meets the M2 level
rating and the wireless mobile device meets the M3 level rating,
the sum of the two values equal M5. This is synonymous for T
ratings. This should provide the hearing aid user with “normal
usage” while using their hearing aid with the particular wireless
mobile device.
“Normal usage” in this context is defined as a signal quality that
is acceptable for normal operation. The M mark is intended to be
synonymous with the U mark. The T mark is intended to be
synonymous with the UT mark. The M and T marks are
recommended by the Alliance for Telecommunications Industries
Solutions (ATIS). The U and UT marks are referenced in Section
20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
HAC/Wi-Fi Language
This mobile device has been tested and rated for use with
hearing aids for some of the wireless technologies that it uses.
However, there may be some newer wireless technologies used
in this mobile device that have not been tested yet for use with
hearing aids. It is important to try the different features of this
mobile device thoroughly and in different locations, using your
hearing aid or cochlear implant, to determine if you hear any
interfering noise. Consult your service provider about its return
and exchange policies and for information on hearing aid
compatibility. If you have questions about return or exchange
policies, consult your service provider or phone retailer.
M3 + M2 = 5 T3 + T2 = 5
Health and Safety Information 184
Restricting Children's Access to Your
Mobile Device
Your mobile device is not a toy. Do not allow children to play with
it because they could hurt themselves and others, damage the
mobile device, or make calls that increase your mobile device
bill.
Keep the mobile device and all its parts and accessories out of
the reach of small children.
FCC Notice and Cautions
FCC Notice
The mobile device may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can require you
to stop using the mobile device if such interference cannot be
eliminated. Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact the
National Fire Protection Association.
Cautions
Any changes or modifications to your mobile device not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this equipment.
Only use approved batteries, antennas, and chargers. The use of
any unauthorized accessories may be dangerous and void the
mobile device warranty if said accessories cause damage or a
defect to the mobile device. Although your mobile device is quite
sturdy, it is a complex piece of equipment and can be broken.
Avoid dropping, hitting, bending, or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the mobile device or install the
mobile device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the device.
• Ensure that any mobile devices or related equipment installed in your
vehicle are securely mounted.
• Check regularly that all wireless mobile device equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the mobile device, its parts, or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including installed or
portable wireless equipment near or in the area over the air bag or in
the air bag deployment area. If wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
• Switch your mobile device off before boarding an aircraft. The use of
wireless mobile devices in aircraft is illegal and may be dangerous to
the aircraft's operation. Check with appropriate authorities before
using any function of a mobile device while on an aircraft.
185
• Failure to observe these instructions may lead to the suspension or
denial of cell phone services to the offender, or legal action, or both.
Warranty Information 186
Section 12: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
What is Not Covered? This Limited Warranty is conditioned upon proper
use of Product by Purchaser. This Limited Warranty does not cover: (a)
defects or damage resulting from accident, misuse, abnormal use,
abnormal conditions, improper storage, exposure to moisture or
dampness, neglect, unusual physical, electrical or electromechanical
stress, or defects in appearance, cosmetic, decorative or structural
items, including framing, and any non-operative parts unless caused by
SAMSUNG; (b) defects or damage resulting from excessive force when
pressing on a touch screen; (c) equipment that has the serial number or
the enhancement data code removed, defaced, damaged, altered or
made illegible; (d) any plastic surfaces or other externally exposed parts
that are scratched or damaged due to normal use; (e) malfunctions
resulting from the use of Product in conjunction or connection with
accessories, products, or ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (f) defects or damage from improper testing,
operation, maintenance, installation, service, or adjustment not
furnished or approved by SAMSUNG; (g) defects or damage from
external causes such as collision with an object, or from fire, flooding,
sand, dirt, windstorm, lightning, earthquake, or from exposure to
weather conditions, or battery leakage, theft, blown fuse, or improper
use of any electrical source; (h) defects or damage caused by cellular
signal reception or transmission, or viruses or other software problems
introduced into the Product; (i) any other acts which are not the fault of
SAMSUNG; or (j) Product used or purchased outside the United States.
This Limited Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this Limited
Warranty does not cover any battery if (i) the battery has been charged
by a battery charger not specified or approved by SAMSUNG for charging
the battery, (ii) any of the seals on the battery are broken or show
Phone 1 Year
Batteries 1 Year
Leather Case 90 Days
Holster 90 Days
Other Phone Accessories 1 Year
187
evidence of tampering, or (iii) the battery has been used in equipment
other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the original date of purchase, the serial number of
Product and the sellers' name and address. To obtain assistance
on where to deliver the Product, call Samsung Customer Care at
1-888-987-4357. Upon receipt, SAMSUNG will promptly repair
or replace the defective Product. SAMSUNG may, at SAMSUNG's
sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace Product with
a rebuilt, reconditioned or new Product. Repaired/replaced cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG. If SAMSUNG determines that
any Product is not covered by this Limited Warranty, Purchaser
must pay all parts, shipping, and labor charges for the repair or
return of such Product.
What Are The Limits On Samsung's Warranty/liability? EXCEPT AS
SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF
LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS
Warranty Information 188
WRITTEN WARRANTY STATED HEREIN. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT
(INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY
BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS
HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW
PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-
PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT
IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH
SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this
allocation of risk and the limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and dealers of SAMSUNG
are not authorized to make modifications to this Limited Warranty, or
make additional warranties binding on SAMSUNG. Accordingly,
additional statements such as dealer advertising or presentation,
189
whether oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Samsung Telecommunications America, LLC
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2011 Samsung Telecommunications America, LLC. All rights reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change without
notice. [021710]
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, AND DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
Warranty Information 190
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
must cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. THIRD-PARY APPLICATIONS. Certain third-party applications
may be included with, or downloaded to this mobile device.
SAMSUNG makes no representations whatsoever about any of
these applications. Since SAMSUNG has no control over such
applications, Purchaser acknowledges and agrees that
SAMSUNG is not responsible for the availability of such
191
applications and is not responsible or liable for any content,
advertising, products, services, or other materials on or available
from such applications. Purchaser expressly acknowledges and
agrees that use of third-party applications is at Purchaser's sole
risk and that the entire risk of unsatisfactory quality,
performance, accuracy and effort is with Purchaser. It is up to
Purchaser to take precautions to ensure that whatever Purchaser
selects to use is free of such items as viruses, worms, Trojan
horses, and other items of a destructive nature. References on
this mobile device to any names, marks, products, or services of
any third-parties are provided solely as a convenience to
Purchaser, and do not constitute or imply an endorsement,
sponsorship, or recommendation of, or affiliation with the thirdparty or its products and services. Purchaser agrees that
SAMSUNG shall not be responsible or liable, directly or indirectly,
for any damage or loss caused or alleged to caused by, or in
connection with, use of or reliance on any such third-party
content, products, or services available on or through any such
application. Purchaser acknowledges and agrees that your use
of any third-party application is governed by such third-party
application provider's Terms of Use, License Agreement, Privacy
Policy, or other such agreement and that any information or
personal data you provide, whether knowingly or unknowingly, to
such third-party application provider, will be subject to such
third-party application provider's privacy policy, if such a policy
exists. SAMSUNG DISCLAIMS ANY RESPONSIBILITY FOR ANY
DISCLOSURE OF INFORMATION OR ANY OTHER PRACTICES OF
ANY THIRD-PARTY APPLICATION PROVIDER.
10. Disclaimer of Warranty Regarding Third-Party Applications.
SAMSUNG DOES NOT WARRANT OR MAKE ANY
REPRESENTATIONS REGARDING THE AVAILABILITY, USE,
TIMELINESS, SECURITY, VALIDITY, ACCURACY, OR RELIABILITY OF,
OR THE RESULTS OF THE USE OF, OR OTHERWISE RESPECTING,
THE CONTENT OF ANY THIRD-PARTY APPLICATION WHETHER
SUCH THIRD-PARTY APPLICATION IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG, IS DOWNLOADED, OR
OTHERWISE OBTAINED. USE OF ANY THIRD-PARTY APPLICATION
IS DONE AT PURCHASER'S OWN DISCRETION AND RISK AND
PURCHASER IS SOLELY RESPONSIBLE FOR ANY DAMAGE TO
YOUR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM
THE DOWNLOADING OR USE OF SUCH THIRD-PARTY
APPLICATIONS. SAMSUNG EXPRESSLY DISCLAIMS ANY
WARRANTY REGARDING WHETHER PURCHASER'S PERSONAL
INFORMATION IS CAPTURED BY ANY THIRD-PARTY APPLICATION
PROVIDER OR THE USE TO WHICH SUCH PERSONAL
INFORMATION MAY BE PUT BY SUCH THIRD-PARTY APPLICATION
PROVIDER. ANY THIRD-PARTY APPLICATIONS PROVIDED WITH
THIS MOBILE DEVICE ARE PROVIDED "AS IS" AND ON AN "AS
AVAILABLE" BASIS, WITHOUT WARRANTIES OF ANY KIND FROM
SAMSUNG, EITHER EXPRESS OR IMPLIED. TO THE FULLEST
Warranty Information 192
EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW, SAMSUNG
DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY OR
WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR PURPOSE,
RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF VIRUSES,
QUIET ENJOYMENT, NON-INFRINGEMENT OF THIRD PARTY
RIGHTS OR OTHER VIOLATION OF RIGHTS. SAMSUNG DOES NOT
WARRANT AGAINST INTERFERENE WITH YOUR ENJOYMENT OF
THE THRID-PARTY APPLICATION, THAT THE FUNCTIONS
CONTAINED IN THE THIRD-PARTY APPLICATION WILL MEET
PURCHASER'S REQUIREMENTS, THAT THE OPERATION OF THE
THIRD-PARTY APPLICATION WILL BE UNINTERRUPTED OR
ERROR-FREE, OR THAT DEFECTS IN THE THIRD-PARTY
APPLICATION WILL BE CORRECTED. PURCHASER ASSUMES THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW
EXCLUSIONS OR LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. NO ADVICE OR INFORMATION,
WHETHER ORAL OR WRITTEN, OBTAINED BY PURCHASER FROM
SAMSUNG SHALL BE DEEMED TO ALTER THIS DISCLAIMER OF
WARRANTY REGARDING THIRD-PARTY APPLICATIONS, OR TO
CREATE ANY WARRANTY.
11. Limitation of Liability. SAMSUNG WILL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO
THE USE OR THE INABILITY TO USE ANY THIRD-PARTY
APPLICATION, ITS CONTENT OR FUNCTIONALITY, INCLUDING BUT
NOT LIMITED TO DAMAGES CAUSED BY OR RELATED TO
ERRORS, OMISSIONS, INTERRUPTIONS, DEFECTS, DELAY IN
OPERATION OR TRANSMISSION, COMPUTER VIRUS, FAILURE TO
CONNECT, NETWORK CHARGES, AND ALL OTHER DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
NOTWITHSTANDING THE FOREGOING, SAMSUNG'S TOTAL
LIABILITY TO PURCHASER FOR ALL LOSSES, DAMAGES, CAUSES
OF ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON
CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF
PURCHASER'S USE OF THIRD-PARTY APPLICATIONS ON THIS
MOBILE DEVICE, OR ANY OTHER PROVISION OF THIS EULA,
SHALL NOT EXCEED THE AMOUNT PURCHASER PAID
SPECIFICALLY FOR ANY SUCH THIRD-PARTY APPLICATION THAT
WAS INCLUDED WITH THIS MOBILE DEVICE. THE FOREGOING
LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS (INCLUDING
SECTIONS 9, 10, AND 11) SHALL APPLY TO THE MAXIMUM
193
EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY
FAILS ITS ESSENTIAL PURPOSE.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Warranty Information 194
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2011 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
195
Section 13: Samsung Product Registration
196
Index
A
Abc mode 53
Adding a New Contact
Idle Screen 61
Address Book 60
Adding a New Contact 61
Adding Pauses to Contact Numbers
63
Copying an entry to the Phone 71
Copying Entry to Phone 71
Copying Entry to SIM Card 71
Deleting Address Book Entries 72
Dialing a Number 64
Favorites 70
Finding an Address Book Entry 64
Group Settings 69
Managing Address Book Entries 71
Service Dialing Numbers 72
Using Contacts List 64
Address Book Options 67
Alarm 148
Android Market 156
Android System Recovery 118
Angry Birds 143
Applications
Using the Camcorder 86
Using the Camera 80
World Clock 149
AT&T Code Scanner 143
AT&T GPS
Navigator 144
AT&T Music
Playlists 76
AT&T Navigator 144
B
Battery
charging 9
Installing 8
Low Battery Indicator 10
Battery Use & Safety 173
Bluetooth
Sending contacts 136
Browser 126
C
Calculator 146
Calendar 146
Call Functions 40
3-Way Calling (Multi-Party Calling)
50
Address Book 42
Adjusting the Call Volume 47
Answering a Call 42
Call Back Missed Call 45
Call Duration 47
Call Log 44
Call Waiting 50
Correcting the Number 41
Dialing a Recent Number 41
Ending a Call 41
International Call 40
Making a Call 40
Manual Pause Dialing 40
Options During a Call 47
Putting a Call on Hold 48
Saving the Missed Call Number to
Address Book 45
Searching for a Number in Address
Book 50
Using the Speakerphone 49
197
Viewing All Calls 44
Viewing Missed Calls 44
Camcorder 86
Accessing the Video Folder 89
Camcorder Options 87
Shooting Video 87
Camcorder Options
Camcorder Options after a Video is
Taken 89
Camera 79
Accessing the Pictures Folder 85
Camera Options 81, 87
Picture Folder 85
Taking Pictures 80
Camera Options
Settings 82, 88
Care and Maintenance 178
Changing Your Settings 100
Charging battery 9
Children and Cell Phones 169
Clock 148
Code Scanner 143
Contacts 60
Cookies
Emptying 130
Creating a Playlist 76
D
Diary 157
Display
icons 18
Display / Touch-Screen 176
Do cell phones pose a health hazard?
166
E
E-mail
Synchronizing a Corporate Email
Account 97
Email 96
Emergency Calls 177
Entering Text 52
Changing the Text Entry Mode 53
Using 123Sym Mode 54
Using Abc Mode 53
Using Android Keyboard 55
Using Swype 55
Using Symbol/Numeric Mode 54
Exposure to Radio Frequency (RF) Signals 166
F
Facebook 26, 151
FCC Hearing Aid Compatibility (HAC)
Regulations for Wireless Devices 182
FCC Notice and Cautions 184
G
Gallery 78
viewing pictures 78
viewing videos 79
Getting Started 5
Setting Up Your Phone 5
Voice mail 13
Gmail 97
Google Maps 154
Google Search Bar 26
GPS & AGPS 176
Group
Adding an Entry 69
Creating New Group 69
Editing 69
Removing an Entry 69
Group Settings
Editing a Caller Group 69
H
Handwriting 57
HDMI cable 139
Health and Safety Information 166
198
I
Icons
Application 20
Indicator 18
Icons, description 18
In-Call Options 47
International Call 40
Internet 126
J
Joining Contacts 65
K
Keypad
Changing Text Input 53
L
Landscape 52
Latitude 152
Live TV 77, 153
M
Maps 154
Market 156
Media Hub 23, 73
Media Playback 140
Media Playback on HD TV 139
Memo 156
Memory Card 37
Memory Card Installation 6
Message Options 92
Message Search 95
Messaging
Creating and Sending Text
Messages 91
Deleting a message 95
Gmail 97
Options 92
Settings 95
Signing into Email 96
Signing into Gmail 97
Types of Messages 91
MHL adapter 139
microSD card 6, 37
Installing 7
Removing 6
microSDHC card 6, 37
Mini Diary 157
Mobile AP 101
Mobile Web 126
Entering Text in the Mobile Web
Browser 128
Navigating with the Mobile Web 127
Using Bookmarks 128
Multimedia 73
Music File Extensions
3GP 74
AAC 74
AAC+ 74
eAAC+ 74
M4A 74
MP3 74
MP4 74
WMA 74
Music Player 74
adding music 76
creating a playlist 76
removing music 76
Mute 48, 49
My Files 158
myAT&T 158
MySpace 26
N
Namecard 93
Navigation 159
Navigator 144
News 160
News & Weather 160
199
O
Operating Environment 180
Other Important Safety Information 184
P
PC Connections 137
Phone
Front View 14
icons 18
Rear View 17
Side View 16
Switching On/Off 10
Pictures 78
Gallery 78
Places 160
Powering
Off 10
On 10
Prefix Dialing 43
Q
Quickoffice 161
QWERTY Keypad 52
R
Reducing Exposure
Hands-Free Kits and Other
Accessories 168
Responsible Listening 179
Restricting Children's Access to Your
Mobile device 184
S
Safe Mode 118
Samsung Mobile Products and Recycling 174
SAR values 171
SD Card 38
Search Bar 26
Service Dialing Numbers 72
Setting up your Phone 11
Settings
enabling wireless network locations
111
Shortcuts 17
SIM card
installation 6
Installing 5
Smart Practices While Driving 172
Snooze 149
Social Updates 26
Speakerphone Key 49
Specific Absorption Rate (SAR) Certification Information 170
Standard Limited Warranty
186
Stopwatch 150
Swap 48
SWYPE
entering text using 55
Swype
help 56
Preferences 55
Swype Settings 55
Symbol/Numeric mode 54
System Recovery 118
T
Task Manager 162
Text Input
Abc mode 53
Methods 52
numeric mode 54
symbol mode 54
Timer 150
Touch Screen 10
Lock/Unlock 10
Travel Charger 9
Using 9
TV 153
200
Twitter 26
U
UL Certified Travel Charger 175
Understanding Your Phone 14
Features of Your Phone 14
Front View 14
Rear View 17
Side Views 16
Unmute 48
USB connection modes 137
USB connections
as a mass storage device 138
USB settings
as a mass storage device 138
mass storage device 138
Windows Meida Player 138
Use wireless networks 111
Using Favorites
Adding Favorites 129
Deleting a Favorite 129
Editing Favorites 129
Using Your TV Remote 140
V
Video Player 77
Voice Mail
Accessing 13
From Another Phone 13
Setup 13
Voice Recorder 162
Volume 109
W
Warranty Information 186
Weather 160
Web 126
Widgets
Android Market 23
Browser 25, 146
Calculator 21
Calendar 21
Camera 21
Email 22
Gmail 22, 151
Memo 23
Settings 24, 162
Video Player 25
Voice Recorder 25, 162
Voice Search 25
YouTube 25
Windows Media Player
synchronizing with 138
World Clock
Deleting an Entry 150
World clock 149
Write and Go 164
Y
Yellowpages 164
YouTube 164
YPmobile 164

Online Document Converter

This website help webmasters to achieve a better user experience. Instead of putting a link to download their prices lists and another type of documents, you can simply send a special link to this service, and we will show your document to your users directly without the need of downloading a special application or installing another browsers plugin. Currently, we can read about hundred the most used database files. Moreover, your users can share this document directly on social networks, giving your document additional page views. By using this service, you can save costs by not overloading your own web server, give your users a better way to read documents online without any problems, and allow them to easily download converted copy for offline reading in a format they like.


Previous 10

Next 10