Sim Network Unlock Pin Code For Samsung Galaxy S3 Download

Copy and paste this link to your website, so they can see this document directly without any plugins.


Keywords

unlock, AT&T, device, Power, device., Enter, your, code, card., Select, Insert, non-AT&T, code., Press, Property., Intellectual, unlocked., card, enter, Unlock, from, remove, displays, select, Once, attempts, have, unsuccessful, permanently, another

Transcript

© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
AT&T Device Unlock Code Instructions
Descargar las instrucciones en español para desbloquear equipos de AT&T (PDF de 513 KB)
To unlock your AT&T phone or tablet so it will work on another carrier’s network, you will need to request
an unlock code from AT&T. Once you receive this code, you will need to follow the unlock instructions
provided here for your device.
Before you start:
 Request unlock code - To request an unlock code simply visit us at att.com/deviceunlock to
review the requirements and submit an AT&T Mobile Device Unlock request. Requests will take
up to five business days to complete. If you have already requested an unlock code online, check
your status at att.com/deviceunlockstatus.
 AT&T branded devices only - Ensure your device is an AT&T branded device before
proceeding. AT&T only unlocks AT&T branded devices. The AT&T logo should appear
somewhere on the device (above the display, on the back, or under the battery).
 Follow instructions carefully - Use extreme care during the unlock process, as the incorrect
entry of an unlock code too many times during the life of the device permanently disables the
unlock ability. The number of attempts to unlock the device is dependent on the manufacturer and
model.
To view instructions to unlock your device, select the link below for your device manufacturer.
Acer LG
Alcatel Microsoft
Amazon Motorola
Apple Netgear
Asus Nokia
AT&T Palm
Audiovox Pantech
Blackberry PCD
Dell Samsung
Garmin Sharp
HP Siemens
HTC Sonim
Huawei Sony & Sony Ericsson
Kyocera TCT Mobile
Lenovo ZTE
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
Acer
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Iconia Tab A501-10S16u
1. Shut down the tablet
2. Insert non-AT&T SIM and power on the tablet.
3. Enter the unlock code. The device is now unlocked.
Alcatel
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
510A, OT871A, 4015T
1. Insert a non-AT&T SIM card.
2. Enter the unlock code and select OK. The device is now unlocked.
Amazon
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Insert a non-AT&T SIM card into the phone.
2. Press and hold the Power button. After the phone turns on, enter the SIM network unlock PIN
when prompted.
 Tap the blank PIN field and the onscreen keyboard will appear.
 Enter the unlock code, and then tap Unlock.
3. You will see the message, “SIM Network unlocked,” on Fire phone.
4. You will then be taken to the Home screen. The device is successfully unlocked.
Apple
What you’ll need to complete the Unlock:
 Computer with iTunes
 SIM Card from AT&T or another Carrier
Using a Non-AT&T SIM Card
1. Remove your SIM card.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
2. Insert the new SIM card.
3. Complete the setup process.
4. Once you have completed the process you will receive message in iTunes: "Congratulations
your device has been unlocked!"
Using an AT&T SIM Card
1. Back up your iPhone using iTunes
Tip: How to Back Up
2. When you have a backup, erase your iPhone
Tip: How to Erase Phone
3. Restore your iPhone from the backup you just made
Tip: How to Restore Your Phone
4. Once you have completed the process you will receive message in iTunes: "Congratulations
your device has been unlocked!"
Asus
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device:
Asus TF300TL, TF600TL (Vivo Tab Rt Tablets), ME375CL, ME302KL, K009, T00S,
Z00D, T00D
1. Power off the device and remove the AT&T SIM card.
2. Insert card from another wireless carrier.
3. Power on the device.
4. The device will prompt for the unlock code.
5. Enter the unlock code.
Asus ME370TG
1. Power off the device and remove the AT&T SIM card.
2. Insert card from another wireless carrier.
3. Power on the device.
4. Tap AT&T AllAccess tile in the start screen. The application displays the screen for you to enter
the code.
5. Enter the unlock code and select unlock device.
AT&T
AT&T Unite Explore
The AT&T Unite Explore can be unlocked two ways:
 Enter the unlock code via the AT&T Wi-Fi Manager
 Install a non-AT&T SIM into the AT&T Unite Explore and enter the unlock via the LCD
Enter an unlock code via the AT&T Wi-Fi Manager
1. Access SIM Security via the AT&T Wi-Fi Manager page from your connected device.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
2. Connect a Wi-Fi device to your mobile hotspot.
3. Go to http://attwifimanager/ in the connected device’s browser.
4. The default login is attadmin
5. From the home page on the AT&T Wi-Fi Manager select Settings > Mobile Broadband > SIM
Security.
6. Enter the 8-digit unlock code to unlock your device
Install a non-AT&T SIM into the device and enter the unlock via the LCD
1. Remove back cover & battery.
2. Remove the pre-installed AT&T SIM and install a non-AT&T SIM into the device.
3. Insert the battery, replace the back cover and power on the device.
4. Tap to unlock screen.
5. When prompted, enter the 8-digit unlock code.
6. Alternatively, from Home screen go to Settings>Broadband & scroll down to SIM PIN to enter
the 8-digit unlock code.
AT&T Unite Pro
The AT&T Unite Pro can be unlocked two ways:
 Install a non-AT&T SIM into the device and enter the unlock code via the AT&T Unite Pro
Manager page
 Install a non-AT&T SIM into the device and enter the unlock code via the LCD
Enter Unlock code via the AT&T Unite Pro Manager page
1. Remove back cover and battery.
2. Remove the pre-installed SIM and install a non-AT&T SIM into the device.
3. Insert the battery, replace the back cover and power on the device.
4. Connect a Wi-Fi device to your mobile hotspot.
5. Go to http://attunitepro in the connected device’s browser.
6. The default login is attadmin.
7. Click on Enter Unlock Code link.
8. Enter 8-digit unlock code to unlock your device
Installing a non-AT&T SIM into the device & unlock via LCD
1. Remove back cover and battery.
2. Remove the pre-installed SIM and install non-AT&T SIM into the device.
3. Install battery, back cover and power on the device.
4. From the device LCD, tap ALERTS. A prompt will appear to select Enter unlock code.
5. When prompted, enter 8-digit unlock code to unlock your device.
AT&T Velocity™ Mobile Hotspot
1. Power on your hotspot and connect to the Internet.
2. On your laptop (or other Wi-Fi device), access the AT&T Wi-Fi Manager home page by visiting
http://attwifimanager or http://192.168.1.1.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
3. Enter the login credentials (the default is attadmin) and click Login.
4. Enter the unlock code and click Apply.
Notes:
 If necessary, contact your service provider for the unlock code.
 You may be prompted with a request to turn off the LCD on your hotspot. Press the Power
button on the hotspot to turn off the screen, and then click OK.
 Once the unlock code is accepted, your mobile hotspot is ready for normal use.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
Audiovox
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device:
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device. The display shows no wording.
4. Enter the SIM unlock code.
5. Select OK. The device is unlocked.
Blackberry
Once you have received the email confirming AT&T has approved your unlock request, follow the
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
Blackberry 5800, 6210, 6280, 6710, Curve 9300, Curve 9360, Pearl 9100
Device Unlock Steps Using a Non-AT&T SIM
1. Insert a non-AT&T SIM card.
2. Power the device on and turn off the radio (turn Wireless option Off).
3. The device displays “Your current SIM card requires an Unlock Code. Would you like to
unlock your device?” Select Yes.
4. Enter the unlock code and select OK.
Device Unlock Steps Using an AT&T SIM
1. Insert an AT&T SIM card.
2. Power phone on and turn off the radio (turn Wireless option Off).
3. Select Settings > Select Options > Advanced Options.
4. Scroll down and select SIM Card.
5. Hold down the ALT key and type MEPD (not displayed on the screen).
6. Hold down the ALT key and type MEP2 (not displayed on the screen).
7. Enter the unlock code and press Enter.
8. Power the device off and on.
Blackberry 93xx Series Versions 6.0 and 7.0
1. Insert an AT&T SIM card.
2. Power phone on and turn off the radio (turn Wireless option Off).
3. Select Options > Device > Advanced Systems > Settings.
4. Scroll down and select SIM Card.
5. Type MEP and hold down the ALT and 2 keys.
6. A prompt appears to enter the MEP2 code; enter the unlock code.
7. Press Enter. Verify that the acceptance message is received.
8. Power the device off and on.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
Blackberry 7000 series (all), 7100g, 7130c, 7210, 7230, 7280, 7290, 7780
1. Go to Options.
2. Scroll to SIM CARD, then press jog dial once to select it.
3. Type MEPD (not case sensitive and will not appear on the screen).
4. Does it say “Network Active?” If so, the device is locked.
5. Press and hold the alt key (key on the lower-left side).
6. While holding the alt key, type in MEPE (not case sensitive and will not appear on the screen).
7. Enter the unlock code when prompted then press jog dial once.
8. The device is now unlocked.
Blackberry 8100c, 8110, 8220, Pearl 8120, 8700c, 8800, 8800c, 8820, All Blackberry
devices running software version 4.5
1. Insert an AT&T SIM card.
2. Power the phone on and turn off the radio (turn the Wireless option Off).
3. Select Options > Advanced Options.
4. Scroll down and select SIM Card.
5. Type MEPD (multi-tap means this is typed in M, ER, OP, DF). This does not display on the
screen.
6. Type MEP2 (multi-tap means this is typed in M, ER, OP, alt TY). This does not display on the
screen.
7. Enter the unlock code and press Enter.
8. Reboot the device. The device is now unlocked.
Blackberry Curve 8300, 8310
1. Insert an AT&T SIM card.
2. Power the phone on and turn off the radio (turn the Wireless option Off).
3. Select Settings > Options > Advanced Options.
4. Scroll down and select SIM Card.
5. Hold down the left shift key (CAP) and type MEPD. This does not display on the screen.
6. Hold down the left shift key (CAP) and type MEP2 (this is typed as MEP ALT E. ALT E is #2 on
the keypad). This does not display on the screen.
7. Enter the unlock code and press Enter.
8. Reboot the device. The device is now unlocked.
Blackberry Bold 9000/9700, Bold 9900, Curve 8320, 8520, 8900, 9500, Torch 9800,
Torch 9860 (any 98xx series)
Device Unlock Steps using a Non-AT&T SIM
If using a 98xx series device, use an external keyboard to unlock the device.
1. Insert a non-AT&T SIM card.
2. Power the device on and turn off the radio (turn Wireless option Off).
3. The device displays Your current SIM card requires an Unlock Code. Would you like to
unlock your device? Select Yes.
4. Enter the unlock code and select OK.
Device Unlock Steps Using an AT&T SIM
1. Insert an AT&T SIM card.
2. Power phone on and turn off the radio (turn Wireless option off).
3. Curve and Bold - Select Options > Advanced Options.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
 Torch and other 6.0 devices- Select Options > Device.
 Select Advanced System Settings.
4. Scroll down and select SIM Card.
5. Hold down the left shift (CAP) key and type MEPD. This does not display on the screen.
6. Hold down the ALT key and type MEP2. “MEPE” displays on the screen.
7. Enter the unlock code and press Enter.
8. Reboot the device.
Blackberry Q10, Passport
1. Power On the device with a non-AT&T SIM card.
2. Let the device fully load.
3. Go to Settings.
4. Select Security and Privacy.
5. Select SIM Card.
6. Select Unlock Network.
7. Enter the unlock code and press OK.
8. The device displays “Network unlock successful.”
Blackberry Z10, Classic SQC100
1. Power on the device with a non-AT&T SIM card.
2. Let the device fully load.
3. The device displays “SIM Network Locked.”
4. Press Lock to begin.
5. The device displays “Network Locked.”
6. Press Enter Code.
7. Enter the unlock code and press OK.
8. The device displays “Network unlock successful.”
Blackberry Playbook
1. Insert a non-AT&T SIM card into the tablet.
2. Go to Settings.
3. Select Security > SIM Card.
4. Select Enable Security.
5. Enter the unlock code when prompted.
6. Press OK.
Blackberry PRIV
1. Power off the device and remove the AT&T SIM card.
2. Insert a non-AT&T SIM card into the device.
3. Power on the device. The device will prompt for the unlock code.
4. Enter the unlock code.
Dell
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions for your model number to complete the unlock for your device.
Ten unsuccessful unlock attempts permanently locks the device to the AT&T network.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
Dell Streak M01M, Streak 7 M02M, Aero 3G GR
1. Power off device and remove the AT&T SIM card.
2. Insert a non-AT&T SIM card into the device.
3. Power on the device.
4. Select Enter Code.
5. Enter the unlock code.
6. Select Done.
7. The device is successfully unlocked.
Dell Venue
1. Power on device with a non-AT&T SIM card.
2. Let fully load.
3. Phone displays “SIM Network Locked.”
4. Pull lock to begin.
5. Phone displays Network Locked.
6. Press Enter Code.
7. Enter the unlock code and press OK.
8. “Network unlock successful” displays.
Dell Venue Pro
1. Power on Dell mobile phone with a non-AT&T SIM card.
2. Enter Dell unlock code.
3. Dell mobile phone should now be unlocked and may automatically reboot.
Garmin
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device:
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Power off the device and remove AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device.
4. Allow the device to fully power up. The message, “Insert a valid ATT SIM Card or unlock the
Device using correct NCK code” appears.
5. Press OK.
6. Enter the unlock code.
7. Press OK. The device is unlocked.
HP (Hewlett-Packard)
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Ten unsuccessful unlock attempts permanently locks the device to the AT&T network.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
HP iPAQ 510, iPAQ 910, iPAQ 6510, iPAQ 6515, iPAQ-J6925, iPAQ-J6920
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device. Wait approximately 30 seconds until the SIM Lock application appears.
 The unlock application enables the input box after a certain period of delay.
 The delay period for the first attempt is 30 seconds but doubles after each incorrect attempt
to unlock the device.
 This deters users from attempting a trial and error approach to unlocking the device.
 The delay may be longer if the user has already attempted to unlock the device with the
wrong code.
4. Enter the unlock code in the blank field.
5. Press OK.
 If the unlock code is incorrect, an error dialog appears. After pressing OK, re-enter the unlock
code after a delay period (see the delay information above in Device-Specific Information).
 If the unlock code is correct, a success dialog appears.
6. Press OK. The device is now unlocked and continues booting.
HP P160UNA, HSTNH-I30C, HSTNH-F30CN, HSTNH-B16C, Slate 7 Plus (MU739),
Elite Pad 900
1. Power off the device.
2. Insert a SIM card from another wireless carrier.
3. Power on the device.
4. Enter the unlock code when prompted.
HTC
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
All HTC devices
1. Power off the device and remove the AT&T SIM card.
2. Insert a non-AT&T SIM card.
3. Power on the device. Wait a few moments, allowing the device to fully power-up.
4. Enter the unlock code when prompted.
5. Press OK. The device is unlocked.
Huawei
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Huawei Fusion, Fusion 2, U2800A, U8800, Media Pad S7-312u, Y536A1
1. Power off the device and remove the AT&T SIM card.
2. Insert card from another wireless carrier.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
3. Power on the device.
4. The device will prompt for the unlock code.
5. Enter the unlock code.
Kyocera
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
1. Power off device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device.
4. Enter the unlock code when prompted.
5. Press Unlock.
6. The device displays "SIM Network unlock successful." The device is successfully unlocked.
Lenovo
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Lenovo ThinkTab Tablet, ThinkPad Tablet 2 EM7700, ThinkPad 10, IdeaTab
A2107A, Helix
1. Power off the device and remove the AT&T SIM card.
2. Insert SIM card from another wireless carrier.
3. Power on the device.
4. Launch the People App, and enter ####1001# in the search edit box. This will take you to the
SIM Lock/Unlock Screen. Select Unlock.
5. Enter the unlock code. The device will reboot.
LG
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
LG G2 (D800), G3 (D850), G3 Vigor (D725), G Vista (D631), G Pad 7.0 LTE, Optimus
G (E970), E980 Optimus G Pro, CT815 Incite, C410 Xpression 2, A380, D950 Flex
G, H950 G Flex2, V495 LG G Pad F 8.0, H443 Escape 2, H810 LG G4, H740 Vista 2,
V930 G Pad X 10.1, H900 LG V10, H820 LG G5
1. Power off the device and insert a non-AT&T SIM card.
2. Power on the device.
3. Enter the unlock code provided.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
4. Select Unlock.
5. The device is unlocked.
LG GU255, GU292
1. Power off the device and insert a non-AT&T SIM card.
2. Power on the device.
3. On the idle screen, enter *#865625#.
4. Select Unlock SIM.
5. Select Network Lock.
6. “SIM Unlock Process. You are about to SIM unlock your phone. Continue?” displays. Select Yes.
7. Enter the 16-digit unlock code and select OK.
8. Re-enter the same unlock code.
9. Select OK. The device is unlocked.
LG CE500
1. Power off the device and insert an AT&T SIM card.
2. Power on the device.
3. On the idle screen, enter 2945#*7101#.
4. Select Settings.
5. Select Security > SIM Locks > Network > Deactivate.
6. Enter the eight-digit unlock code in the Enter NCK Input screen.
7. Select OK. The device is unlocked.
LG CU400, CU405
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device. Device displays “Invalid SmartChip.”
4. On the idle screen, enter 159753#*#.
 This code does not display on the screen.
 Push 1 for network unblock before entering the unlock code.
5. Enter eight-digit unlock code.
6. Select OK. The device is unlocked.
LG CU500, CU500v
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device. “Invalid SmartChip” displays.
4. On the idle screen, enter 159753#*#. The device displays Enter. NCK Remaining: 5.
5. Enter the unlock code.
6. Select OK. The device is unlocked.
LG Trax CU575
1. Power off the device and insert a non-AT&T SIM.
2. Power on the device. “Invalid SIM status” displays. Enter *#865625#.
3. “Unlock USIM” displays.
4. Select 1. UNLOCK USIM.
5. Select Network Lock. Enter NCK. “Remaining: 5.” displays.
6. Enter the 16-digit unlock code then select OK. This code does not display on the screen.
7. “Network Unlock Success” displays. The device is unlocked.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
LG A340, CU515, Shine CU720, Shine II GD710, Vu (No Mobile TV) CU915, Vu
(Mobile TV) CU920, Xpression C395
1. Power off the device and insert a non-AT&T SIM card.
2. Power on the device.
3. On the idle screen, enter *#865625#.
4. Select Unlock SIM.
5. Select Network Lock.
6. Enter the 16-digit unlock code and select OK.
7. Re-enter the same unlock code.
8. Select OK. The device is unlocked.
9. Power off the device and place the original SIM Card back into the device.
LG A7110, Adrenaline AD600, C1300, C1300i, C1500, C2000, CE110, CG180,
CG300, CP150, CU320, F7200, F9100, F9200, G4010, G4050, GR700 Vu Plus,
GU285, GU295, L1200, L1400, LUU 2100TI, Prime GS390, Phoenix P505, Quantum
C900, 1400i, L21G, L33L
1. Power off the device and remove the AT&T SIM card.
2. Insert a non-AT&T SIM card and then power on the device.
3. Select UNLOCK on the touch-screen.
4. Select OK.
5. Enter the unlock code.
6. Select OK.
7. Re-enter the same unlock code.
8. Select OK. The device is unlocked.
LG eXpo GW820, Incite CT810
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from other wireless carrier.
3. Power on the device. “The device is locked by a network” or “Invalid SIM message” displays:
 For Incite CT810, enter code 2945#*810#.
 For eXpo GW820, enter code 2945#*820#.
4. Device displays “Invalid SIM Network Lock. You are about to SIM unlock your phone. Entering
the unlock code incorrectly 10 times will result in the permanent lock of your phone. Continue?
Yes or No.” Select Yes and enter the 16-digit unlock code.
5. Select OK. The device is unlocked.
LG Invision CB630, Neon GT365, Neon II GW370, Xenon GR500
Device unlock steps for AT&T SIM
1. Power off the device and insert an AT&T SIM card.
2. Power on the device.
3. On the idle screen, enter *#865625#.
4. Select Yes at the warning message.
5. On the SIM Unlock screen, enter the 16-digit unlock code and select OK.
6. Re-enter the same unlock code.
7. Select OK. The device is unlocked.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
Device unlock steps for non-AT&T SIM
1. Power off the device and insert a non-AT&T SIM card.
2. Power on the device.
3. Select Unlock.
4. Select Yes.
5. On the SIM Unlock screen, enter the 16-digit unlock code and select OK.
6. Re-enter the same unlock code.
7. Select OK. The device is unlocked.
LG Arena GT950
1. Insert non-AT&T SIM card.
2. Power on the device.
3. Select Unlock.
4. Enter *#865625#.
5. On the SIM Unlock screen, the device displays “You are about to SIM Unlock your phone. Select
Yes.”
6. Enter the 16-digit unlock code and select OK.
7. The “Unlock successful” message (pop-up window) displays.
8. When “Unlock Process Complete: Your phone is unlocked” displays, select OK. The device is
successfully unlocked.
LG Olivin CF360, CF750
1. Power off the device.
2. Insert non-AT&T SIM card.
3. Enter the unlock code provided.
4. Device should display “Network Lock Deactivated.”
5. The device is unlocked.
6. Turn the device off.
7. Remove the non-AT&T SIM card.
8. Insert the AT&T SIM and Power on the device.
LG Encore GT550
1. Power off the device.
2. Insert non-AT&T SIM card.
3. Power the device on and it should display “Phone Restricted.”
4. Select Cancel. The device displays “Phone Restriction Code.”
5. Enter the unlock code provided.
6. Select OK. The device is unlocked.
7. Power off the device.
8. Remove the non-AT&T SIM card
9. Insert the AT&T SIM and power on the device.
LG Escape P870, Nitro P930, Thrill P925, Thrive P506
1. Power off the device.
2. Insert non-AT&T SIM card.
3. Phone displays “Enter SIM network unlock PIN.”
4. Input the unlock code provided.
5. Select OK. The device is unlocked.
6. Power off the device.
7. Remove the non-AT&T SIM card.
8. Insert the AT&T SIM and power on the device.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
All other LG devices
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device.
4. Select Unlock.
5. “SIM Unlock Process. Continue?” displays. Select Yes.
6. Enter the unlock code.
7. Select OK. The device is unlocked.
Microsoft Surface
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Ten unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Switch the device off.
2. Remove the AT&T SIM card.
3. Insert a non-AT&T SIM card.
4. Switch the device on.
5. Go to the Windows 8.1 Start screen and launch AT&TAllAccess.
6. Enter the unlock code (8 digits) and tap Unlock device. The device is now unlocked.
Motorola
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the handset. Allow the phone to fully power up.
4. Enter the unlock code when prompted.
5. Press OK.
6. When complete, the device is successfully unlocked.
Netgear
Netgear Unite Explore
The Netgear Unite Explore can be unlocked two ways:
 Enter the unlock code via the AT&T Wi-Fi Manager
 Install a non-AT&T SIM into the Netgear Unite Explore and enter the unlock via the LCD
Enter an unlock code via the AT&T Wi-Fi Manager
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
1. Access SIM Security via the AT&T Wi-Fi Manager page from your connected device.
2. Connect a Wi-Fi device to your mobile hotspot.
3. Go to http://attwifimanager/ in the connected device’s browser.
4. The default login is attadmin
5. From the home page on the AT&T Wi-Fi Manager select Settings > Mobile Broadband > SIM
Security.
6. Enter the 8-digit unlock code to unlock your device
Install a non-AT&T SIM into the device and enter the unlock via the LCD
1. Remove back cover & battery.
2. Remove the pre-installed AT&T SIM and install a non-AT&T SIM into the device.
3. Insert the battery, replace the back cover, and power on the device.
4. Tap to unlock screen.
5. When prompted, enter the 8-digit unlock code.
6. Alternatively, from Home screen go to Settings>Broadband & scroll down to SIM PIN to enter
the 8-digit unlock code.
Netgear Unite Pro
The Netgear Unite Pro can be unlocked two ways:
 Install a non-AT&T SIM into the device and enter the unlock code via the AT&T Unite Pro
Manager page
 Install a non-AT&T SIM into the device and enter the unlock code via the LCD
Enter Unlock code via the Netgear Unite Pro Manager page
1. Remove back cover and battery.
2. Remove the pre-installed SIM and install a non-AT&T SIM into the device.
3. Insert the battery, replace the back cover and power on the device.
4. Connect a Wi-Fi device to your mobile hotspot.
5. Go to http://attunitepro in the connected device’s browser.
6. The default login is attadmin.
7. Click on Enter Unlock Code link.
8. Enter 8-digit unlock code to unlock your device
Installing a non-AT&T SIM into the device & unlock via LCD
1. Remove back cover and battery.
2. Remove the pre-installed SIM and install non-AT&T SIM into the device.
3. Install battery, back cover and power on the device.
4. From the device LCD, tap ALERTS. A prompt will appear to select Enter unlock code.
5. When prompted, enter 8-digit unlock code to unlock your device.
Netgear Velocity™ Mobile Hotspot
1. Power on your hotspot and connect to the Internet.
2. On your laptop (or other Wi-Fi device), access the AT&T Wi-Fi Manager home page by visiting
http://attwifimanager or http://192.168.1.1.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
3. Enter the login credentials (the default is attadmin) and click Login.
4. Enter the unlock code and click Apply.
Notes:
 If necessary, contact your service provider for the unlock code.
 You may be prompted with a request to turn off the LCD on your hotspot. Press the Power
button on the hotspot to turn off the screen, and then click OK.
 Once the unlock code is accepted, your mobile hotspot is ready for normal use.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
Nokia
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Nokia E61, E62
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Power off the device and remove AT&T SIM card.
2. Insert a SIM card from another wireless carrier into the phone.
3. Power on the handset. “Undo request” displays.
4. Press the # key.
5. Press the P key.
6. Press the W key.
7. Press the + key.
8. Enter the unlock code.
9. Press the + key.
10. Press the 1 key.
11. Press the # key. The handset is successfully unlocked.
Nokia C3, E71x
Three unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Remove the SIM card, then power on the handset.
Note: A SIM card is not necessary to perform the unlock procedure; however, if the unlock steps
fail without a SIM card, try inserting a SIM into the device.
2. Press the # key.
3. Press the P key.
4. Press the W key.
5. Press the + key.
6. Enter the unlock code.
7. Press the + key.
8. Press the 1 key.
9. Press the # key. The handset is successfully unlocked.
Nokia Lumia 2520
Ten unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Switch the device off.
2. Remove the AT&T SIM card.
3. Insert a non-AT&T SIM card.
4. Switch the device on.
5. Go to the Windows 8.1 Start screen and launch AT&TAllAccess.
6. Enter the unlock code (8 digits) and tap Unlock device. The device is now unlocked.
All other Nokia Lumia models
Ten unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Switch the device off.
2. Remove the AT&T SIM card.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
3. Insert a non-AT&T SIM card.
4. Switch the device on. If prompted, enter the SIM PIN code.
5. Wait for the SIM unlock window to open.
6. Enter the unlock code provided (8 or 20 digits) and press Enter.
7. Power the device off.
8. Power the device on. The device is unlocked.
All other Nokia devices (excluding Lumia models)
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Power on the handset.
2. Press the # key.
3. Press the * key three times (displays a P).
4. Press the * key four times (displays a W).
5. Press the * key two times (displays a + sign).
6. Enter the unlock code.
7. Press the * key two times (displays a + sign).
8. Press the 1 key.
9. Press the # key one time. The handset is successfully unlocked.
Palm
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
Palm Treo 750
1. Power off the device and remove AT&T SIM card.
2. Insert SIM card from another wireless carrier.
3. Power on the device.
 The 750 should automatically power on once the battery is replaced.
 If not, press the red Power button for two seconds.
4. Prompt for unlock code displays.
5. Press and hold Option and enter the unlock code.
Note: Do not enter #*# before the unlock code.
6. Select OK.
7. Screen shows “Unlock Code passed.” The device is now unlocked.
Palm Pre Plus (P101), Pixi Plus (P121)
1. Power off device and remove AT&T SIM card.
2. Insert SIM card from another wireless carrier.
3. Power on the device (ensure the device is in wireless mode).
4. Display prompts for the code.
5. Enter the unlock code.
6. The device is now unlocked.
All other Palm devices
1. Power off device and remove the AT&T SIM card.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
2. Insert SIM card from another wireless carrier.
3. Power on the device. Ensure the phone is in wireless mode.
4. Press the green Phone button.
5. Enter * # * # unlock code #.
6. Press Dial. The device is now unlocked.
Pantech
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
All Pantech Windows Mobile Devices, Impact P7000
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Power off the device and remove AT&T SIM card.
2. Insert SIM card from another wireless carrier.
3. Power on the device. The device displays “Change SIM” and left soft key is labeled Unlock.
4. Press the left soft key. A password box appears.
5. Enter the unlock code.
6. Press OK (center soft key). The device displays rebooting, then power cycles and is unlocked.
Pantech Breeze II P2000, Breeze III P2030, Breeze IV P2050, Ease P2020,
Crossover P8000, Link II P7040, Pursuit P9020, Pursuit II P6010
Ten unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Insert a non-AT&T SIM card into the device.
2. Power on the device.
3. Select the soft key under Unlock at the SIM LOCKED screen.
4. Select Yes at the SIM UNLOCK PROCESS screen.
5. Enter the unlock code and select OK.
6. Reenter the unlock code and select OK.
7. The device displays “UNLOCK PROCESS COMPLETE. Your Phone is Unlocked.”
8. Select OK. The device is unlocked.
Pantech Burst P9070, Discover P9090, P8010 Easy Experience, P8010 Standard
Experience, P9050 Laser, Pocket P9060
Ten unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Insert a non-AT&T SIM card into the device.
2. Power on the device.
3. The device asks for the Network Unlock Code.
4. Enter the eight-digit unlock code.
5. Press Enter. The device is unlocked.
Alternate Unlock Steps
1. Power on the device with an accepted SIM card.
2. Enter *#865625#.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
3. A SIM unlock menu appears; press OK.
4. Enter the eight-digit unlock code.
5. Re-enter the eight-digit unlock code.
6. The device displays “Unlock Process Complete.” Press OK. The device is unlocked.
Pantech C810 Duo, C820 Matrix Pro, P4100 (including OS 4.0), P5000 Link2, P6020
Swift, P6030 Renew
Ten unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Power off the device and remove the AT&T SIM card.
2. Insert the SIM card from another wireless carrier.
3. Power on the device. Let the device fully load.
Screen displays, “SIM Locked. An incorrect SIM is being used. Only Emergency calls can be
dialed.”
4. Select Unlock.
Screen displays, “SIM Unlock Process. You are about to SIM Unlock. More than 10 unsuccessful
attempts will lock the phone. Continue?”
5. Select Yes.
6. Enter the eight-digit unlock code and then select OK.
7. Screen displays “Enter the Unlock Code. Unlock Attempt: 1 of 10.”
8. Screen displays “Reenter the Unlock Code. Unlock Attempt 1 of 10.”
9. Use the same eight-digit unlock code that was entered in the previous screen, and then select
OK.
10. The SIM unlock process has completed. Select Yes to go into idle screen.
All other Pantech devices
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Insert AT&T SIM card.
2. Power on the device.
3. Enter *#865625# at the idle screen.
4. The device displays “SIM unlock process.”
5. Press Yes (left soft key).
6. Enter the unlock code and press OK (center soft key).
7. Re-enter the unlock code and press OK. The device is unlocked.
PCD
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device:
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Power off the device and remove the AT&T SIM card.
2. Insert the SIM card from another wireless carrier.
3. Power on the handset.
4. With the device in Portrait mode, select the Phone icon.
5. The display shows, “To unlock SIM enter unlock code correctly. Entering incorrect code Five (5)
times results in the permanent locking of your phone continue?”
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
6. Enter the 15-digit unlock code and select Done.
Note: The entry of an incorrect code displays the message, “Incorrect Lock Code or Incorrect
Unlock Code Try Again.”
7. Select Done.
Samsung
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
Samsung A107, A117, A137, A167, A177, A197, A227, A237, A257, A437, A517,
A637, A657, A707, A717, A727, A737, A777, Access A827,C417, Eternity A867,
A197, Flight A797, GT-i9020, GT-i9250, Mythic A897, Propel A767, Rugby A837,
Solstice A887, SLM A747, T319, T339, X427, X497, Z105, Z107
1. Power off the device and remove the SIM card.
2. Power up the device without a SIM
3. Press Dial (may not be required).
4. Enter #7465625*638*, the unlock code, and #.
Note: After the first *, the rest of the sequence does not display on the screen.
5. After a successful unlock, “Network Lock Deactivated” displays. “Not Yet Personalized” displays if
the device has already been unlocked.
Samsung A516, BlackJack i607, Epix i907, Focus i937, i437, i437P, Propel Pro
i627, Rugby III A997, ZX10, ZX20
1. Power on the device with a SIM from another carrier.
2. At the Network Lock screen, enter #7465625*638*.
3. Enter the unlock code and press OK (left soft key).
4. After a successful unlock, “Network Lock Deactivated” displays.
5. If the device is still locked, attempt to unlock the device with a non-AT&T SIM card and enter
#7465625*638*, the unlock code, and #.
Samsung A127, C207, D307, D347, D357, D407, D807, E316, N625, X507
1. Power off the device and remove the SIM card.
2. Power on the device.
3. Enter #0111*, the unlock code, and #. The device powers off and back on.
Samsung ATIV Smart PC Tablet XE500T1C-HA1US, XE700T1A
1. Power off the device and remove the AT&T SIM card.
2. Insert card from another wireless carrier.
3. Power on the device.
4. Tap AT&T AllAccess tile in the start screen.
5. Enter the unlock code when prompted and select unlock device.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
All other Samsung devices
1. Power off the device, remove the battery, and insert a non-AT&T SIM card.
2. Re-insert the battery and power on the device with non-AT&T SIM.
3. The device displays” Enter the device unlock code.”
4. Enter the unlock code.
5. Press OK.
Sharp
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. With the device powered off, insert a non-AT&T SIM.
2. Turn on the device. The screen displays “Invalid SIM and Network Lock.”
3. Select Unlock on the bottom left of the screen.
4. Select Yes on the SIM Unlock Process screen to continue.
5. Enter the 15-digit unlock code and select Done on bottom left of the screen.
6. If the unlock code is entered correctly, the screen displays “Unlock Completed and Device
Unlocked.”
7. Press OK for the normal start-up procedure of the device.
Siemens
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
Siemens S40
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device.
4. Enter *#9103, then the unlock code. The device is successfully unlocked.
Siemens S66
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device.
4. Enter *#0000*, then the unlock code. The device is successfully unlocked.
All other Siemens devices
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device.
4. Enter the unlock code when prompted. The device is successfully unlocked.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
Sonim
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Sonim XP1520, XP5600-A-R0, XP5560-A-R4, XP5560-A-R5, XP5700, XP6700, Ex-
Handy 08
Ten unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Power off device and remove the AT&T SIM card.
2. Insert a non-AT&T SIM card into the device.
3. Power on the device.
4. Enter the unlock code when prompted.
5. Select Unlock.
6. The device displays "SIM Network unlock successful."
7. The device is successfully unlocked.
Sony & Sony Ericsson
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
Sony Ericsson Xperia Play 4G, Xperia X10, Experia ION LT28at, Experia TL
LT30at, Tablet P (SGPT211US)
1. Power off the device and remove the AT&T SIM card.
2. Insert card from another wireless carrier.
3. Power on the device.
4. The device displays “Invalid SIM” and provides a space to enter the unlock code.
5. Enter the unlock code.
Sony Ericsson Z500
To unlock a Z500, a SIM card is not required:
1. Power on the device. The device displays “Insert SIM.”
2. Press and hold the left arrow (<) button.
3. At the same time, press the star (*) button twice.
4. Press the left arrow (<) button.
5. Phone briefly displays: “Personalized with MNC2” or “Personalized with MNC3.”
 Wait approximately three seconds.
 The display indicates “Network” and a picture of a closed lock.
6. Press Select. The device displays “Unlock (Net) 5 and NCK.”
7. Enter the SIM unlock code.
8. Press OK. The device displays “Network unlocked” and “Insert SIM” appears.
9. The handset is successfully unlocked.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
Sony Ericsson W518a, W580i, C905A, S710A, T226, T290A, T62U, T68M, Vivaz
U5at, W300i, W350A, W600i, W760a, W810i, Z300a, Z310a, Z520a, Z525, Z750a
1. Power off the device and remove the AT&T SIM card.
2. Power on the device without a SIM card.
3. Press the left arrow (<) button once.
4. Press the star (*) button twice.
5. Press the left arrow (<) button.
6. The device displays “Personalize with MNC2.”
7. Enter the unlock code.
Sony GC82, GC83, T306, T616, T637, T237, J220a
1. Move the joystick to the left once.
2. Enter ** (press the star key twice).
3. Move the joystick to the left once again to enter the personalized menu.
4. Choose [Network] and press select.
Note: If given an option, select MC2.
5. Enter the unlock code.
All other Sony and Sony Ericsson devices
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device.
4. Press and hold the left arrow (<) button.
5. At the same time, press the star (*) button twice.
6. Press the left arrow (<) button. Display indicates “ME Lock.”
 Wait approximately three seconds.
 The display indicates “Network” and a picture of a closed lock.
7. Press Yes. The device displays “Unlock?”
8. Press Yes. The device displays “Enter NCK.”
9. Enter the SIM unlock code.
10. Press Yes. The device displays “Network” and a picture of an open lock for three seconds, and
then reverts to the main display.
11. The handset is successfully unlocked.
TCT Mobile
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
1. Power off the device and remove the AT&T SIM card.
2. Insert a SIM card from another wireless carrier.
3. Power on the device.
4. Enter SIM network unlock PIN when prompted.
5. Press OK. The device is unlocked.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
ZTE
Once you have received the email confirming AT&T has approved your unlock request, follow these
instructions to complete the unlock for your device.
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1. Insert a non-AT&T SIM card.
2. Power on the device.
3. The device displays “Phone locked. Please insert a valid SIM card.”
4. Select Unlock (left soft key).
5. The device displays “Please enter network unlock code (16 digits). Remaining: X.”
6. Enter the 16-digit unlock code.
7. Select OK (left soft key).
8. Select OK to reset the device.
© 2016 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
AT&T locks handsets in order to recover costs and to control theft of devices. Even at full retail, a device purchased from AT&T is often priced less
than a comparable device purchased at full retail from another retail location. Therefore, AT&T limits the quantity of requests so that we can discourage
possible speculation by individuals and companies who may take advantage of this price difference for their own profit.
Request Restrictions
 AT&T reserv es the right to decline the release of unlock codes if we suspect that the request is not legitimate or if we suspect abuse.
 Any customer porting to AT&T f rom another carrier or leaving AT&T requires the unlock code before their device accepts the new carrier's
SIM card.
 AT&T dev ices are SIM-locked to all AT&T networks and do not need to be unlocked if a customer relocates or changes their home network.
 AT&T does not generate the device unlock code for handsets of other carriers.
 Customers that have activated AT&T service with a non-wireless handset should be referred to their previous carrier to request an unlock
code.
Device Unlocking History
 AT&T locks all devices, as of November 11, 2004.
 From 2001 to October 31, 2004, only domestic devices were locked (850MHz and 1900MHz radio frequencies). International tri/quad-band
dev ices were unlocked. Tri/quad-band devices were those with 900MHz and 1800MHz radio frequencies.
 Prior to 2001, all dev ices were locked.
Dev ice unlock codes are unique to each device and are tied to the International Mobile Equipment Identity (IMEI) number. The code is a unique 8-16
digit unlocking code for each device as determined by the manufacturer.

Online Document Converter

This website help webmasters to achieve a better user experience. Instead of putting a link to download their prices lists and another type of documents, you can simply send a special link to this service, and we will show your document to your users directly without the need of downloading a special application or installing another browsers plugin. Currently, we can read about hundred the most used database files. Moreover, your users can share this document directly on social networks, giving your document additional page views. By using this service, you can save costs by not overloading your own web server, give your users a better way to read documents online without any problems, and allow them to easily download converted copy for offline reading in a format they like.


Previous 10

Next 10