Samsung St72 Manual Download

Copy and paste this link to your website, so they can see this document directly without any plugins.


Keywords

camera, your, Select, photos, mode, with, select, Using, Press, then, will, files, photo, memory, that, battery, press, from, when, Shooting, videos, When, smart, camera., subject, capture, Playback, Description, options, network

Transcript

This user manual includes detailed usage instructions for
your camera. Please read this manual thoroughly.Click a topic
ST150F/ST151F/ST152F/ST72/ST73
USER
MANUAL
Basic troubleshooting Quick reference Contents
Basic functions Extended functions Shooting options
Playback/Editing Wireless network (ST150F/ST151F/ST152F only) Settings
Appendixes Index
1
Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera
Prevent damage to subjects’ eyesight.
Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals.
If you use the flash too close to your subject’s eyes, this can cause temporary or
permanent eyesight damage.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small children and animals.
Small parts may cause choking or serious injury if swallowed. Moving parts and
accessories may present physical dangers as well.
Do not expose the camera to direct sunlight or high temperatures for an
extended period of time.
Prolonged exposure to sunlight or extreme temperatures can cause permanent
damage to your camera’s internal components.
Warning—situations that could cause injury to yourself or others
Do not disassemble or attempt to repair your camera.
This may result in electric shock or damage to the camera.
Do not use your camera near flammable or explosive gases and liquids.
This may cause a fire or explosion.
Do not insert flammable materials into the camera or store these materials
near the camera.
This may cause a fire or electric shock.
Do not handle your camera with wet hands.
This may result in electric shock.
2
Avoid covering the camera or charger with blankets or clothes.
The camera may overheat, which may distort the camera or cause a fire.
Do not handle the power supply cord or go near the charger during a
thunderstorm.
This may result in electric shock.
If liquid or foreign objects enter your camera, immediately disconnect all
power sources, such as the battery or charger, and then contact a Samsung
service center.
Comply with any regulations that restrict the use of a camera in a certain area.
• Avoid interference with other electronic devices.
• Turn off the camera when in an aircraft. Your camera can cause interference with
aircraft equipment. Follow all airline regulations and turn off your camera when
directed by airline personnel.
• Turn off the camera near medical equipment. Your camera can interfere with
medical equipment in hospitals or health care facilities. Follow all regulations,
posted warnings, and directions from medical personnel.
Avoid interference with pacemakers.
Maintain the distance between this camera and all pacemakers to avoid potential
interference, as recommended by the manufacturer and research groups. If you
have any reason to suspect that your camera is interfering with a pacemaker
or other medical device, turn off the camera immediately and contact the
manufacturer of the pacemaker or medical device for guidance.
Health and safety information
3
Caution—situations that could cause damage to your camera or other
equipment
Remove the batteries from your camera when storing it for an extended period
of time.
Installed batteries may leak or corrode over time and cause serious damage to your
camera.
Use only authentic, manufacturer-recommended, Lithium-ion replacement
batteries. Do not damage or heat the battery.
Inauthentic, damaged, or heated batteries may cause a fire or personal injury.
Use only Samsung-approved batteries, chargers, cables and accessories.
• Using unauthorized batteries, chargers, cables or accessories can cause batteries
to explode, damage your camera, or cause injury.
• Samsung is not responsible for damage or injuries caused by unapproved
batteries, chargers, cables or accessories.
Use the battery only for its intended purpose.
Misusing the battery may cause a fire or electric shock.
Do not touch the flash while it fires.
The flash is very hot when fired and may burn your skin.
When you use the AC charger, turn off the camera before you disconnect the
power to the AC charger.
Failing to do so may result in fire or electric shock.
Disconnect the charger from the wall socket when not in use.
Failing to do so may result in fire or electric shock.
Do not use a damaged power supply cord, plug, or loose outlet when you
charge batteries.
This may cause a fire or electric shock.
Do not allow the AC charger to come in contact with the +/- terminals on the
battery.
This may cause a fire or electric shock.
Do not drop or subject the camera to strong impacts.
Doing so may damage the screen or external or internal components.
Exercise caution when you connect cables or adapters and install batteries and
memory cards.
If you force the connectors, improperly connect cables, or improperly install
batteries and memory cards, you can damage ports, connectors, and accessories.
Health and safety information
4
Health and safety information
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged charger, battery, or memory card.
This may result in electric shock or camera malfunction or cause a fire.
Do not place the camera in or near magnetic fields.
Doing so may cause the camera to malfunction.
Do not use the camera if the screen is damaged.
If the glass or acrylic parts are broken, visit a Samsung Electronics Service Center to
have the camera repaired.
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of files or damage that may
result from camera malfunction or improper use.
You must plug the small end of the USB cable into your camera.
If the cable is reversed, it may damage your files.
The manufacturer is not responsible for any loss of data.
Avoid interference with other electronic devices.
Your camera emits radio frequency (RF) signals that may interfere with unshielded
or improperly shielded electronic equipment, such as pacemakers, hearing aids,
medical devices, and other electronic devices in homes or vehicles. Consult the
manufacturers of your electronic devices to solve any interference problems you
experience. To prevent unwanted interference, use only Samsung-approved devices
or accessories.
Use your camera in the normal position.
Avoid contact with your camera’s internal antenna.
Data transference and your responsibilities
• Data transferred via WLAN could be leaked, so avoid transferring sensitive data in
public areas or on open networks.
• The camera manufacturer is not liable for any data transfers that infringe on
copyrights, trademarks, intellectual property laws, or public decency ordinances.
5
Copyright information
• Microsoft Windows and the Windows logo are registered trademarks of the
Microsoft Corporation.
• Mac and Apple App Store are registered trademarks of the Apple Corporation.
• Google Play Store is a registered trademark of Google, Inc.
• microSD™, microSDHC™, and microSDXC™ are registered trademarks of the SD
Association.
• Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered trademarks
of the Wi-Fi Alliance.
• Trademarks and trade names used in this manual are the property of their
respective owners.
• The user manual covers the ST150F/ST151F/ST152F (Wi-Fi support) and
ST72/ST73 models.
• The illustrations and explanations of ST150F/ST151F/ST152F (Wi-Fi support)
are used in the user manual.
• Although some features of ST150F/ST151F/ST152F (Wi-Fi support) and ST72/
ST73 are different, they operate in the same way except Wi-Fi functions.
• Camera specifications or contents of this manual may be changed without
prior notice due to an upgrade of the camera's functions.
• We recommend using your camera within the country where you purchased.
• Use this camera responsibly and adhere to all laws and regulations
concerning its use.
• You are not allowed to reuse or distribute any part of this manual without
prior permission.
Outline of the User Manual
Basic functions 18
Learn about your camera’s layout, icons, and basic functions for
shooting.
Extended functions 42
Learn how to capture a photo and record a video by selecting a
mode.
Shooting options 57
Learn how to set the options in Shooting mode.
Playback/Editing 78
Learn how to play back photos or videos, and edit photos or videos.
Also, learn how to connect your camera to your computer or TV.
Wireless network (ST150F/ST151F/ST152F only) 101
Learn to connect to wireless local area networks (WLANs) and use
functions.
Settings 121
Refer to options to configure your camera’s settings.
Appendixes 127
Get information about error messages, specifications, and
maintenance.
6
Icons used in this manual
Icon Function
Additional information
Safety warnings and precautions
[ ] Camera buttons. For example, [Shutter] represents the shutter button.
( ) Page number of related information

The order of options or menus you must select to perform a step; for
example: Select Face Detection → Normal (represents Select Face
Detection, and then select Normal).
* Annotation
Expressions used in this manual
Pressing the shutter
• Half-press [Shutter]: Press the shutter halfway down
• Press [Shutter]: Press the shutter all the way down
Half-press [Shutter] Press [Shutter]
Subject, background, and composition
• Subject: The main object in a scene, such as a person, animal, or still life
• Background: The objects around the subject
• Composition: The combination of a subject and background
Composition
Background
Subject
Exposure (Brightness)
The amount of light that enters your camera determines the exposure. You can alter
the exposure by changing the shutter speed, aperture value, or ISO sensitivity. By
altering the exposure, your photos will be darker or lighter.
 Normal exposure  Overexposure (too bright)
7
Special features of your camera
Setting a DIRECT LINK button option
You can select a Wi-Fi function to launch when you press the DIRECT LINK button.
1 Access Settings.
2 Access the DIRECT LINK button option.
3 Select a Wi-Fi feature from the list.
Using the DIRECT LINK button (ST150F/ST151F/ST152F only)
Press the DIRECT LINK button to activate the Wi-Fi function that you have
designated.
8
Special features of your camera
Using AutoShare (ST150F/ST151F/ST152F only)
When you capture a photo with your camera, the photo is saved to the smart phone automatically. The camera connects to a smart phone wirelessly.
4 Select the camera from the list and
connect the smart phone to the
camera.
• If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
5 Capture a photo.
• The captured photo is saved to the camera, and then transferred to the
smart phone.
1 Install Samsung SMART CAMERA
App on the smart phone.
2 Turn on the AutoShare feature.
3 Launch Samsung SMART CAMERA
App on the smart phone.
9
Special features of your camera
Using MobileLink (ST150F/ST151F/ST152F only)
You can send files easily from your camera to a smart phone. The camera connects wirelessly to smart phones that support the MobileLink feature.
4 Select the camera from the list and
connect the smart phone to the
camera.
• If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
5 On the smart phone or camera,
select files to transfer from the
camera.
6 On the smart phone, touch the copy
button or on the camera, select
Share.
1 Install the Samsung SMART
CAMERA App on the smart phone.
2 Access the MobileLink mode.
• If a pop-up message appears, select an
option.
3 Launch the Samsung SMART
CAMERA App on the smart phone.
10
Special features of your camera
Using Remote Viewfinder (ST150F/ST151F/ST152F only)
You can remotely control your camera from a smart phone. The camera connects to a smart phone wirelessly. Use the smart phone as a remote shutter release with the Remote
Viewfinder feature. The captured photo will appear on the smart phone.
4 Select the camera from the list and
connect the smart phone to the
camera.
• If a pop-up message appears on your
camera, allow the smart phone to
connect to your camera.
5 Touch and hold to focus, and
then release it to capture a photo.
6 Touch the thumbnail to view the
photo.
1 Install the Samsung SMART
CAMERA App on the smart phone.
2 Access the Remote Viewfinder
mode.
3 Launch the Samsung SMART
CAMERA App on the smart phone.
11
Special features of your camera
Shooting samples – Macro
You can capture close up shots of a subject or small subjects, such as flowers or
insects.
The example image may differ from the actual photo that you capture.
1 Select the macro option ( ).
2 Capture a photo.
12
Basic troubleshooting
Learn to solve common problems by setting shooting options.
The subject’s eyes
appear red.
Red eye occurs when the subject's eyes reflect light from the camera flash.
• Set the flash option to Red-eye or Red-eye Fix. (p. 61)
• If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 92)
Photos have dust spots. If dust particles are present in the air, you may capture them in photos when you use the flash.
• Turn off the flash or avoid capturing photos in a dusty place.
• Set ISO sensitivity options. (p. 63)
Photos are blurred. Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.
Use the DIS function or half-press [Shutter] to ensure the subject is in focus. (p. 40)
Photos are blurred when
shooting at night.
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the camera steady long
enough to capture a clear photo and may result in camera shake.
• Select Night Shot mode. (p. 51)
• Turn on the flash. (p. 61)
• Set ISO sensitivity options. (p. 63)
• Use a tripod to prevent your camera from shaking.
Subjects come out
too dark because of
backlighting.
When the light source is behind the subject or when there is a high contrast between light and dark areas, the subject may
appear too dark.
• Avoid shooting toward the sun.
• Select Backlight in Scene mode. (p. 47)
• Set the flash option to Fill in. (p. 61)
• Adjust the exposure. (p. 69)
• Set the Auto Contrast Balance (ACB) option. (p. 70)
• Set the metering option to Spot if a subject is in the center of the frame. (p. 70)
13
Quick reference
Adjusting the exposure (brightness)
• ISO sensitivity (to adjust the sensitivity to light)  63
• EV (to adjust exposure)  69
• ACB (to compensate for subjects against bright
backgrounds)  70
• Metering  70
• AEB (to capture 3 photos of the same scene with
different exposures)  73
Capturing photos of scenery
• Scene mode > Landscape  47
• Live Panorama mode  48
Applying effects to photos
• Magic Frame mode  52
• Photo Filter mode  53
• Split Shot mode  55
• Motion Photo mode  56
• Image Adjust (to adjust Sharpness, Contrast, or
Saturation)  74
Capturing photos of people
• Beauty Shot mode  50
• Red-eye/Red-eye Fix (to prevent or correct red-eye)
 61
• Face Detection  67
Capturing photos at night or in the dark
• Scene mode > Sunset, Dawn  47
• Night Shot mode  51
• Flash options  61
• ISO sensitivity (to adjust the sensitivity to light)  63
Capturing action photos
• Continuous, Motion Capture  73
Capturing photos of text, insects, or
flowers
• Scene mode > Text  47
• Close-up Shot mode  51
• Macro  64
Applying effects to videos
• Movie Filter mode  54
Reducing camera shake
• Digital Image Stabilization (DIS)  39
• Viewing files as thumbnails  80
• Viewing files by category  81
• Deleting all files on the memory  83
• Viewing files as a slide show  86
• Viewing files on a TV  93
• Connecting your camera to a computer  94
• Sending photos or videos via email
(ST150F/ST151F/ST152F only)  114
• Using photo or video sharing websites
(ST150F/ST151F/ST152F only)  115
• Adjusting sound and volume  123
• Adjusting the brightness of the display  124
• Changing the display language  125
• Setting the date and time  125
• Before contacting a service center  138
14
Contents
Extended functions ....................................................................................................... 42
Using Basic modes ................................................................................................... 43
Using the Smart Auto mode ................................................................................. 43
Using the Program mode ...................................................................................... 44
Using the Smart Movie mode .............................................................................. 45
Using the Movie mode .......................................................................................... 46
Using the Scene mode .......................................................................................... 47
Using the Live Panorama mode ........................................................................... 48
Using Scene modes ................................................................................................. 50
Using the Beauty Shot mode ............................................................................... 50
Using the Night Shot mode .................................................................................. 51
Using the Close-up Shot mode ............................................................................ 51
Using the Magic Frame mode .............................................................................. 52
Using the Photo Filter mode ................................................................................ 53
Using the Movie Filter mode ................................................................................ 54
Using the Split Shot mode .................................................................................... 55
Using the Motion Photo mode ............................................................................ 56
Basic functions ................................................................................................................. 18
Unpacking ................................................................................................................... 19
Camera layout ............................................................................................................ 20
Using the DIRECT LINK button (ST150F/ST151F/ST152F only) ....................... 22
Inserting the battery and memory card .......................................................... 23
Charging the battery and turning on your camera ..................................... 24
Charging the battery ............................................................................................. 24
Turning on your camera ........................................................................................ 24
Performing the initial setup ................................................................................. 25
Learning icons ........................................................................................................... 27
Using the Home screen .......................................................................................... 28
Accessing the Home screen .................................................................................. 28
Icons on the Home screen .................................................................................... 29
Setting Wallpaper ................................................................................................... 31
Selecting options or menus .................................................................................. 32
Setting the display and sound ............................................................................. 34
Setting the display type ........................................................................................ 34
Setting the sound ................................................................................................... 35
Capturing photos ..................................................................................................... 36
Zooming .................................................................................................................. 37
Reducing camera shake (DIS) ............................................................................... 39
Tips for getting a clearer photo ........................................................................... 40
15
Contents
Shooting options ............................................................................................................ 57
Selecting a resolution and quality ..................................................................... 58
Selecting a resolution ............................................................................................ 58
Selecting an image quality ................................................................................... 59
Using the timer .......................................................................................................... 60
Shooting in the dark ................................................................................................ 61
Preventing red-eye ................................................................................................. 61
Using the flash ........................................................................................................ 61
Adjusting the ISO sensitivity ................................................................................. 63
Changing the camera’s focus ............................................................................... 64
Using macro ............................................................................................................ 64
Changing the focus option ................................................................................... 64
Adjusting the focus area ....................................................................................... 65
Using Face Detection .............................................................................................. 67
Detecting faces ....................................................................................................... 67
Capturing a smile shot ........................................................................................... 67
Detecting eye blinking .......................................................................................... 68
Tips for detecting faces ......................................................................................... 68
Adjusting brightness and color ........................................................................... 69
Adjusting the exposure manually (EV) ............................................................... 69
Compensating for backlighting (ACB) ................................................................ 70
Changing the metering option ............................................................................ 70
Selecting a White Balance setting ....................................................................... 71
Using burst modes ................................................................................................... 73
Adjusting images ..................................................................................................... 74
Reducing the sound of the zoom ....................................................................... 75
Available shooting options by shooting mode ............................................. 76
16
Contents
Playback/Editing ............................................................................................................. 78
Viewing photos or videos in Playback mode ................................................. 79
Starting Playback mode ........................................................................................ 79
Viewing photos ....................................................................................................... 84
Playing a video ........................................................................................................ 87
Editing a photo .......................................................................................................... 89
Resizing photos ...................................................................................................... 89
Rotating a photo .................................................................................................... 89
Applying Smart Filter effects ................................................................................ 90
Adjusting your photos ........................................................................................... 91
Viewing files on a TV ............................................................................................... 93
Transferring files to the computer ..................................................................... 94
Transferring files to your Windows OS computer ............................................. 94
Transferring files to your Mac OS computer ...................................................... 95
Using programs on a computer .......................................................................... 96
Installing i-Launcher .............................................................................................. 96
Using i-Launcher .................................................................................................... 97
Wireless network (ST150F/ST151F/ST152F only) ..........................................101
Connecting to a WLAN and configuring network settings ..................... 102
Connecting to a WLAN ........................................................................................ 102
Using the login browser ...................................................................................... 103
Network connection tips .................................................................................... 104
Entering text .......................................................................................................... 105
Saving files to a smart phone automatically ................................................ 106
Sending photos or videos to a smart phone ................................................ 107
Using a smart phone as a remote shutter release ...................................... 108
Using Auto Backup to send photos or videos .............................................. 110
Installing the program for Auto Backup on your PC ....................................... 110
Sending photos or videos to a PC ..................................................................... 110
Sending photos or videos via email ................................................................ 112
Changing email settings ..................................................................................... 112
Sending photos or videos via email ................................................................. 114
17
Contents
Using photo or video sharing websites ........................................................ 115
Accessing a website ............................................................................................. 115
Uploading photos or videos ............................................................................... 115
Using AllShare Play to send files ....................................................................... 117
Uploading photos to online storage ................................................................. 117
Viewing photos or videos on devices that support AllShare Play ................ 118
Sending photos using Wi-Fi Direct .................................................................. 120
Settings .............................................................................................................................121
Settings menu ......................................................................................................... 122
Accessing the settings menu ............................................................................. 122
Sound ..................................................................................................................... 123
Display .................................................................................................................... 123
Connectivity .......................................................................................................... 124
General ................................................................................................................... 125
Appendixes .....................................................................................................................127
Error messages ........................................................................................................ 128
Camera maintenance ............................................................................................ 129
Cleaning your camera .......................................................................................... 129
Using or storing the camera ............................................................................... 130
About memory cards ........................................................................................... 131
About the battery ................................................................................................. 134
Before contacting a service center ................................................................... 138
Camera specifications ........................................................................................... 141
Glossary ..................................................................................................................... 145
Index ........................................................................................................................... 150
Unpacking ……………………………………… 19
Camera layout …………………………………… 20
Using the DIRECT LINK button
(ST150F/ST151F/ST152F only) ………………… 22
Inserting the battery and memory card ……… 23
Charging the battery and turning
on your camera ………………………………… 24
Charging the battery …………………………… 24
Turning on your camera ……………………… 24
Performing the initial setup …………………… 25
Learning icons …………………………………… 27
Using the Home screen ………………………… 28
Accessing the Home screen …………………… 28
Icons on the Home screen ……………………… 29
Setting Wallpaper ……………………………… 31
Selecting options or menus …………………… 32
Setting the display and sound ………………… 34
Setting the display type ………………………… 34
Setting the sound ……………………………… 35
Capturing photos ……………………………… 36
Zooming ……………………………………… 37
Reducing camera shake (DIS) ………………… 39
Tips for getting a clearer photo ………………… 40
Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.
Basic functions 19
Unpacking
The following items are included in your product box.
Camera AC adapter/USB cable
Rechargeable battery Strap
Quick Start Guide
Optional accessories
Camera case A/V cable
Battery charger Memory card/Memory card adapter
• The illustrations may differ slightly from the items shipped with your product.
• The items included in the box may differ depending on the model.
• You can purchase optional accessories at a retailer or a Samsung service center.
Samsung is not responsible for any problems caused by using unauthorized
accessories.
Basic functions 20
Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions.
Battery chamber cover
Insert a memory card and battery
Tripod mount
USB and A/V port
Accepts USB cable and A/V cable
Flash
Lens
Microphone
Shutter button
AF-assist light/Timer lamp
Speaker
POWER buttonInternal antenna*
* Avoid contact with the internal antenna while
using the wireless network.
(ST150F/ST151F/ST152F only)
Camera layout
Basic functions 21
Button Description
Basic functions Other functions
D Change the display option. Move up
c Change the macro option. Move down
F Change the flash option. Move left
t Change the timer option. Move right
Confirm the highlighted option or menu.
Button Description
Start a preset Wi-Fi function. (ST150F/ST151F/ST152F only) (p. 22)
Access the Home screen. (p. 28)
Access options or menus.
Enter Playback mode.
Delete files in Playback mode.
Status lamp
• Blinking: When the camera is saving a
photo or video, being read by a computer,
when the image is out of focus, there is a
problem charging the battery (On ST150F/
ST151F/ST152F, when the camera is
connecting to WLAN or sending a photo)
• Steady: When the camera is connected to a
computer, charging the battery, or when the
image is in focus
Zoom button
• In Shooting mode: Zoom in or out
• In Playback mode: Zoom in on part of a photo, view
files as thumbnails, or adjust the volume
Display
Buttons
(See the table below)
Attaching the strap
x y Camera layout
Basic functions 22
Using the DIRECT LINK button (ST150F/ST151F/ST152F only)
You can turn on the Wi-Fi feature conveniently with [x].
Press [x] to activate the Wi-Fi function that you have designated.
Press [x] again to return to the previous mode.
Setting a DIRECT LINK button option
You can select a Wi-Fi function to launch when you press [x].
1 On the Home screen, scroll to .
2 Select .
3 Select General → DIRECT LINK (Wi-Fi Button).
4 Select a Wi-Fi feature. (p. 126)
Basic functions 23
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Rechargeable battery
Battery lock
Slide the lock up to release the
battery.
Memory card
Push the card gently until it disengages
from the camera, and then pull it out of
the slot.
You can use the internal memory for temporary storage if a memory card is not
inserted.
Memory card
Insert a memory card with the goldcolored contacts facing up.
Rechargeable battery
Insert the battery with the Samsung logo
facing up.
Basic functions 24
Charging the battery and turning on your camera
Turning on your camera
Press [X] to turn your camera on or off.
• The initial setup screen appears when you turn on
the camera for the first time. (p. 25)
Turning on your camera in Playback mode
Press [P]. The camera turns on and immediately
accesses Playback mode.
Charging the battery
Before you use the camera for the first time, you must charge the battery. Plug the
small end of the USB cable into your camera, and then plug the other end of the
USB cable into the AC adapter.
Status lamp
• Red light on: Charging
• Red light off: Fully charged
• Red light blinking: Error
Use only the AC adapter and USB cable supplied with your camera. If you use
another AC adapter (such as SAC-48), the camera battery may not charge or work
properly.
Basic functions 25
1 Press [c] to select Time Zone, and then press [t] or [o].
2 Press [D/c] to select Home, and then press [o].
• When you travel to another country, select Visit, and then select a new time
zone.
3 Press [F/t] to select a time zone, and then press [o] → [m].
Cancel Set
Time Zone : Home
London
4 Press [c] to select Date/Time Set, and then press [t] or [o].
Cancel Set
Date/Time Set
Year Month Day Hour Min DST
5 Press [F/t] to select an item.
6 Press [D/c] to set the date, time, and daylight-saving time, and
then press [o].
Performing the initial setup
When the initial setup screen appears, follow the steps below to configure the camera’s basic settings. The default language is preset for the country or region where the camera
is sold. You can change the language as desired by selecting Language.
Performing the initial setup
Basic functions 26
7 Press [c] to select Date Type, and then press [t] or [o].
8 Press [D/c] to select a date type, and then press [o].
Date Type
Exit Select
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
9 Press [c] to select Time Type, and then press [t] or [o].
10 Press [D/c] to select a time type, and then press [o].
11 Press [m] to finish the initial setup.
The screen may differ depending on the language selected.
Basic functions 27
Learning icons
The camera displays icons for the mode and options you set. The icons flash yellow for a while if you change options.
1
2
3
3 Shooting information
Icon Description
Current date
Current time
Available number of photos
Memory card inserted
• : Fully charged
• : Partially charged
• : Empty (Recharge)
• : Charging (Connected with the
charger)
Aperture value
Shutter speed
Available recording time
Auto focus frame
Camera shake
Zoom indicator
Photo resolution when the Intelli
zoom is on
Zoom ratio
Icon Description
Burst option
AutoShare On
(ST150F/ST151F/ST152F only)
2 Shooting options (right)
Icon Description
Intelli zoom on
Photo resolution
Video resolution
Metering
Frame rate (per second)
Flash
Sound Alive on
Digital Image Stabilization (DIS)
Focus
Image adjustment (sharpness, contrast,
and saturation)
Timer
1 Shooting options (left)
Icon Description
Shooting mode
Exposure value adjusted
ISO sensitivity
White balance
Face detection
Focus Area
Face tone
Basic functions 28
Accessing the Home screen
In Shooting or Playback mode, press [h].
Press [h] again to return to the previous mode.
1
2
Smart Auto
Scene
Program
Live
Panorama
Smart Movie Movie
Back Page Move
Settings
Album Wi-FiBasic
No. Description
1
Current Home screen
• Rotate [Zoom] to the left or right to switch to another Home screen.
• Press [D] to scroll to the Home screen name, and then press [F/t]
to switch to another Home screen.
• Press [F/t] repeatedly to switch to another Home screen.
2
Mode icons
• Press [D/c/F/t] to scroll to a desired mode, and then press [o]
to access the mode.
Using the Home screen
You can select a shooting mode or access the settings menu by selecting the icons on the Home screen.
Using the Home screen
Basic functions 29
Icons on the Home screen

Icon Description
Smart Auto: Capture a photo with a scene mode selected
automatically by the camera. (p. 43)
Program: Capture a photo with settings you have adjusted manually.
(p. 44)
Smart Movie: Record a video with a scene mode selected
automatically by the camera. (p. 45)
Movie: Record a video. (p. 46)
Scene: Capture a photo with options that are preset for a specific
scene. (p. 47)
Live Panorama: Capture and combine a series of photos to create a
panoramic image. (p. 48)
Settings: Adjust settings to match your preferences. (p. 122)
(ST150F/ST151F/ST152F only)
Icon Description
MobileLink: Send photos or videos to a smart phone. (p. 107)
Remote Viewfinder: Use a smart phone as a remote shutter release
and see a preview on your smart phone of an image from your
camera. (p. 108)
Auto Backup: Send photos or videos that you captured with the
camera to a PC wirelessly. (p. 110)
Email: Send photos or videos stored on the camera via email. (p. 112)
SNS & Cloud: Upload photos or videos to file sharing websites.
(p. 115)
AllShare Play: Upload photos to AllShare Play online storage or view
files on devices that support AllShare Play. (p. 117)
Using the Home screen
Basic functions 30

Icon Description
Beauty Shot: Capture a portrait with options to hide facial
imperfections. (p. 50)
Night Shot: Capture a night scene by adjusting shutter speed. (p. 51)
Close-up Shot: Capture close-up photos of subjects. (p. 51)
Magic Frame: Capture a photo with various frame effects. (p. 52)
Photo Filter: Capture a photo with various filter effects. (p. 53)
Movie Filter: Record a video with various filter effects. (p. 54)
Split Shot: Capture several photos and arrange them with preset
layouts. (p. 55)
Motion Photo: Capture and combine a series of photos, and then
select an area to be animated to create a GIF animation. (p. 56)

Icon Description
Album: View files as thumbnails. (p. 80)
Photo Editor: Edit photos with various effects. (p. 89)
Using the Home screen
Basic functions 31
Setting Wallpaper
Set wallpaper for the Home screen with the desired image.
1 On the Home screen, scroll to .
2 Select .
3 Select Display → Wallpapers.
4 Select an option.
Option Description
Wallpaper Gallery Select the desired wallpaper from the default gallery.
Album Set a photo you have captured as a wallpaper.
5 Scroll to the desired wallpaper, and then press [o].
• If you select a photo you have captured, you can set a specified area as
wallpaper. Rotate [Zoom] to the left or right to reduce or enlarge the area.
Press [D/c/F/t] to move the area.
6 Press [o] to save.
• If you select a photo you have captured, press [o], and then select Yes.
You can also set the photo you are viewing as wallpaper by pressing [m], and
then selecting Set Wallpaper in Playback mode.
Basic functions 32
Selecting options or menus
To select an option or a menu, press [m], and then press [D/c/F/t] or [o].
Going back to the previous menu
Press [m] to go back to the previous menu.
Half-press [Shutter] to return to Shooting mode.
1 In Shooting mode, press [m].
2 Select an option or a menu.
• To move up or down, press [D] or [c].
• To move left or right, press [F] or [t].
3 Press [o] to confirm the highlighted option or menu.
Selecting options or menus
Basic functions 33
For example, to select a White Balance option in Program mode:
1 On the Home screen, scroll to .
2 Select .
3 Press [m].
Exit Select
AutoShare
EV
White Balance
ISO
Flash
Focus
4 Press [D/c] to select White Balance, and then press [t] or
[o].
AutoShare
EV
White Balance
ISO
Flash
Focus
Exit Select
5 Press [F/t] to select a White Balance option.
Back Select
White Balance : Daylight
6 Press [o] to save your settings.
AutoShare is available in ST150F/ST151F/ST152F only.
Basic functions 34
Setting the display and sound
Learn how to change the basic display information and sound settings.
Setting the option display view
You can hide or show the option display appearing in some modes.
Press [o] repeatedly.
• Hide the option display.
• Show the option display.
Option display
Landscape
Panel off
▲ For example, in Scene mode
Setting the display type
You can select a display type for the Shooting or Playback mode. Each type displays
different shooting or playback information. See the table below.
Press [D] repeatedly to change the display type.
Mode Display type
Shooting
• Hide all information about shooting options.
• Show all information about shooting options.
Playback
• Hide all information about the current file.
• Hide all information about the current file except basic
information.
• Show all information about the current file.
Setting the display and sound
Basic functions 35
Setting the sound
Turn on or off the sound your camera emits when you perform functions.
1 On the Home screen, scroll to .
2 Select .
3 Select Sound → Beep Sound.
4 Select an option.
Option Description
Off The camera does not emit any sounds.
On The camera emits sounds.
Basic functions 36
1 On the Home screen, scroll to .
2 Select .
3 Align your subject in the frame.
4 Half-press [Shutter] to focus.
• A green frame means the subject is in focus.
• A red frame means the subject is out of focus.
5 Press [Shutter] to capture a photo.
6 Press [P] to view the captured photo.
• To delete the photo, press [f], and then select Yes.
7 Press [P] to return to Shooting mode.
See page 40 for tips to get clearer photos.
Capturing photos
Learn how to capture photos easily and quickly in Smart Auto mode.
Capturing photos
Basic functions 37
Zooming
You can capture close-up photos by adjusting the zoom.
Zoom out Zoom in
Zoom ratio
When you rotate the zoom button, the zoom ratio shown on the screen may
change inconsistently.
Digital zoom
The Digital zoom is supported by default in Shooting mode. If you zoom in on
a subject in Shooting mode and the zoom indicator is in the digital range, your
camera is using the Digital zoom. By using both the 5X Optical zoom and 5X Digital
zoom, you can zoom in up to 25 times.
Zoom indicator
Optical range
Digital range
• Digital zoom is not available with the Tracking AF option.
• If you capture a photo with the Digital zoom, the photo quality may be lower
than normal.
Capturing photos
Basic functions 38
Intelli zoom
If the zoom indicator is in the Intelli range, your camera is using the Intelli zoom.
Photo resolution varies according to the zoom rate if you use the Intelli zoom. By
using both the Optical zoom and Intelli zoom, you can zoom in up to 10 times.
Zoom indicator
Optical range
Intelli range
Photo resolution
when the Intelli
zoom is on
• Intelli zoom is not available with the Text option in SCN mode and the Tracking
AF option.
• The Intelli zoom helps you capture a photo with less quality deterioration than
the Digital zoom. However, the photo quality may be lower than when you use
the Optical zoom.
• The Intelli zoom is available only when you set a 4:3 resolution ratio.
If you set another resolution ratio with Intelli zoom on, the Intelli zoom will be
turned off automatically.
• The Intelli zoom is always on in Smart Auto mode.
Setting Intelli zoom
1 In Shooting mode, press [m].
2 Select Intelli Zoom.
3 Select an option.
Icon Description
Off: The Intelli zoom is deactivated.
On: The Intelli zoom is activated.
Capturing photos
Basic functions 39
Reducing camera shake (DIS)
Reduce camera shake digitally in Shooting mode.
 Before correction  After correction
1 In Shooting mode, press [m].
2 Select DIS.
3 Select an option.
Icon Description
Off: DIS is deactivated.
On: DIS is activated.
• DIS may not function properly when:
- you move your camera to follow a moving subject
- you use the Digital zoom
- there is too much camera shake
- the shutter speed is slow (for example, when you capture night scenes)
- the battery is low
- you capture a close-up shot
• If the camera is hit or dropped, the display will be blurry. If this occurs, turn off
the camera, and then turn it on again.
• DIS is available in Program mode only.
Basic functions 40
Holding your camera correctly
Ensure nothing is blocking the lens,
flash, or microphone.
Half-pressing the shutter button
Half-press [Shutter] and adjust the focus. The camera
adjusts the focus and exposure automatically.
The camera sets the aperture value and shutter
speed automatically.
Focus frame
• Press [Shutter] to capture the photo if the
focus frame appears in green.
• Change the composition and half-press
[Shutter] again if the focus frame appears in
red.
Reducing camera shake
Set the Digital Image Stabilization option to reduce camera
shake digitally. (p. 39)
When is displayed
Camera shake
When you shoot in the dark, avoid setting the flash option to Slow Sync or Off. The
aperture remains open longer and it may be harder to hold the camera steady long
enough to capture a clear photo.
• Use a tripod or set the flash option to Fill in. (p. 61)
• Set ISO sensitivity options. (p. 63)
Tips for getting a clearer photo
Basic functions 41
Preventing your subject from being out of focus
It may be difficult to get your subject in focus when:
- there is little contrast between the subject and background (for example, when
your subject is wearing clothing that is similar in color to the background)
- the light source behind the subject is too bright
- the subject is shiny or reflective
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame
• When you capture photos in low light
Turn on the flash.
(p. 61)
• When subjects are moving rapidly
Use the Continuous
or Motion Capture
function. (p. 73)Using the focus lock
Half-press [Shutter] to focus. When the subject is in focus, you can
reposition the frame to change the composition. When you are ready,
press [Shutter] to capture your photo.
Using Basic modes ……………………………… 43
Using the Smart Auto mode …………………… 43
Using the Program mode ……………………… 44
Using the Smart Movie mode ………………… 45
Using the Movie mode ………………………… 46
Using the Scene mode ………………………… 47
Using the Live Panorama mode ……………… 48
Using Scene modes ……………………………… 50
Using the Beauty Shot mode ………………… 50
Using the Night Shot mode …………………… 51
Using the Close-up Shot mode ………………… 51
Using the Magic Frame mode ………………… 52
Using the Photo Filter mode …………………… 53
Using the Movie Filter mode …………………… 54
Using the Split Shot mode ……………………… 55
Using the Motion Photo mode ………………… 56
Extended functions
Learn how to capture a photo and record a video by selecting a mode.
Extended functions 43
Using Basic modes
Capture photos or record videos using basic modes. You can also use the Scene mode and the Live Panorama mode.
Icon Description
Landscapes
Scenes with bright white backgrounds
Landscapes at night
Portraits at night
Landscapes with backlighting
Portraits with backlighting
Portraits
Close-up photos of objects
Close-up photos of text
Sunsets
Indoors, dark
Partially lit
Close-up with spot lighting
Portraits with spot lighting
Blue skies
Forested areas
Using the Smart Auto mode
In Smart Auto mode, your camera automatically chooses the appropriate camera
settings based on the type of scene it detects. The Smart Auto mode is helpful if you
are not familiar with the camera settings for various scenes.
1 On the Home screen, scroll to .
2 Select .
3 Align your subject in the frame.
• The camera automatically selects a scene. An appropriate scene icon appears
at the top left of the screen. The icons are listed below.
Using Basic modes
Extended functions 44
Using the Program mode
In Program mode, you can set most options, except the shutter speed and aperture
value, which the camera sets automatically.
1 On the Home screen, scroll to .
2 Select .
3 Set the desired options.
• For a list of options, refer to "Shooting options". (p. 57)
4 Align your subject in the frame, and then half-press [Shutter] to
focus.
5 Press [Shutter] to capture the photo.
Icon Description
Close-up photos of colorful subjects
Camera is stabilized on a tripod and the subject is not moving for a
certain period of time. (when shooting in the dark)
Actively moving subjects
Fireworks (when using a tripod)
4 Half-press [Shutter] to focus.
5 Press [Shutter] to capture the photo.
• If the camera does not recognize an appropriate scene mode, it uses the default
settings for Smart Auto mode.
• Even if it detects a face, the camera may not select a portrait mode depending on
the subject's position or lighting.
• The camera may not select the correct scene depending on the shooting
conditions, such as camera shake, lighting, or distance to the subject.
• Even if you use a tripod, the camera may not detect the mode if the subject is
moving.
• The camera consumes more battery power, because it changes settings often to
select appropriate scenes.
Using Basic modes
Extended functions 45
Icon Description
Landscapes
Sunsets
Blue skies
Forested areas
4 Press [Shutter] to start recording.
5 Press [Shutter] again to stop recording.
• If the camera does not recognize an appropriate scene mode, it uses the default
settings for Smart Movie mode.
• The camera may not select the correct scene depending on the shooting
conditions, such as camera shake, lighting, and distance to the subject.
Using the Smart Movie mode
In Smart Movie mode, your camera automatically chooses the appropriate camera
settings based on the scene it has detected. This mode is available only when you
insert a memory card into the camera.
1 On the Home screen, scroll to .
2 Select .
3 Align your subject in the frame.
• The camera automatically selects a scene. An appropriate scene icon will
appear at the top left of the screen.
Using Basic modes
Extended functions 46
1 On the Home screen, scroll to .
2 Select .
3 Set desired options.
• For a list of options, refer to "Shooting options". (p. 57)
4 Press [Shutter] to start recording.
5 Press [Shutter] again to stop recording.
Using the Movie mode
In Movie mode, you can customize settings to record HD videos (1280X720) of up to
20 minutes in length. The camera saves recorded videos as MP4 (H.264) files.
This mode is available only when you insert a memory card into the camera.
• H.264 (MPEG-4 part10/AVC) is a high-compression video format established by
the international standards organizations ISO-IEC and ITU-T.
• Some memory cards may not support high definition recording. If your card
does not, set a lower resolution.
• Memory cards with slow writing speeds will not support high-resolution videos.
To record high-resolution videos, use memory cards with faster write speeds.
• If you use the zoom function when recording a video, the camera may record
the noise of the zoom operating. To decrease zoom noise, use the Sound Alive
function. (p. 75)
Using Basic modes
Extended functions 47
Using the Scene mode
In Scene mode, you can capture a photo with options that are preset for a specific
scene.
1 On the Home screen, scroll to .
2 Select .
3 Select a scene.
Landscape
Panel off
Pause recording
The camera allows you to temporarily pause a video while recording. With this
function, you can record separate scenes as a single video.
• Press [o] to pause while recording.
• Press [o] to resume.
Using Basic modes
Extended functions 48
Option Description
Landscape Capture still-life scenes and landscapes.
Sunset Capture scenes at sunset, with natural-looking reds and yellows.
Dawn Capture scenes at sunrise.
Backlight Capture backlit subjects.
Beach &
Snow
Reduce underexposure of subjects caused by sunlight reflected
from sand or snow.
Text Clearly capture text from printed or electronic documents.
4 Align your subject in the frame, and then half-press [Shutter] to
focus.
5 Press [Shutter] to capture the photo.
Using the Live Panorama mode
In Live Panorama mode, you can capture a wide panoramic scene in a single photo.
Capture and combine a series of photos to create a panoramic image.
 Shooting example
1 On the Home screen, scroll to .
2 Select .
3 Align your subject in the frame, and then half-press [Shutter] to
focus.
• Align the camera with the far left or the far right, or very top or bottom, of the
scene you want to capture.
4 Press and hold [Shutter] to start shooting.
Using Basic modes
Extended functions 49
5 With [Shutter] pressed, slowly move the camera in the direction that
will let it capture the rest of the panorama.
• Arrows toward the direction of motion are displayed, and the entire shooting
image is displayed in the preview box.
• When the viewfinder is aligned with the next scene, the camera captures the
next photo automatically.
6 When you are finished, release [Shutter].
• When you have captured all the necessary shots, the camera combines them
into one panoramic photo.
• For best results when capturing panoramic photos, avoid the following:
- moving the camera too quickly or too slowly
- moving the camera too little to capture the next image
- moving the camera at irregular speeds
- shaking the camera
- shooting in dark places
- capturing moving subjects nearby
- shooting conditions where the brightness or color of light is changing
• Photos taken are automatically saved, and shooting is stopped under the
following conditions:
- if you change the shooting direction while shooting
- if you move the camera too rapidly
- if you don't move the camera
• Selecting Live Panorama mode will disable the digital and optical zoom
functions. If you select Live Panorama mode while the lens is zoomed in, the
camera automatically zooms out to the default position.
• Some shooting options are not available.
• The camera may stop shooting due to the shooting composition or movement
within the scene.
• Your camera may not capture the last scene in its entirety if you stop moving the
camera exactly where you want the scene to end. To capture the entire scene,
move your camera slightly beyond the point where you want the scene to end.
Extended functions 50
Using the Beauty Shot mode
In Beauty Shot mode, you can capture a portrait with options to hide facial
imperfections.
1 On the Home screen, scroll to .
2 Select .
3 Press [F/t] to adjust Face Retouch.
• For example, increase the face retouch setting to hide more imperfections.
Panel off
Face Retouch : 2
4 Press [m].
5 Select Face Tone.
6 Press [F/t] to adjust Face Tone.
• For example, increase the face tone setting to make skin appear lighter.
Face Tone : 2
Cancel Set
7 Press [o] to save the setting.
8 Align your subject in the frame, and then half-press [Shutter] to
focus.
9 Press [Shutter] to capture the photo.
Using Scene modes
Capture a photo or record a video by selecting appropriate modes for various scenes or effects.
Using Scene modes
Extended functions 51
Using the Night Shot mode
In Night Shot mode, you can use a slow shutter speed to extend the time the
shutter stays open. Increase the aperture value to prevent overexposure.
1 On the Home screen, scroll to .
2 Select .
3 Press [F/t] to adjust the shutter speed.
Shutter Speed : 1 sec
Panel off
4 Align your subject in the frame, and then half-press [Shutter] to
focus.
5 Press [Shutter] to capture the photo.
Use a tripod to prevent blurry photos.
Using the Close-up Shot mode
In Close-up Shot mode, you can capture close-up photos of subjects, such as
flowers or insects.
1 On the Home screen, scroll to .
2 Select .
3 Align your subject in the frame, and then half-press [Shutter] to
focus.
4 Press [Shutter] to capture the photo.
Using Scene modes
Extended functions 52
4 Align your subject in the frame, and then half-press [Shutter] to
focus.
5 Press [Shutter] to capture the photo.
The resolution is automatically set to .
Using the Magic Frame mode
In Magic Frame mode, you can apply various frame effects to your photos. The
shape and the feel of the photos will change according to the frame you select.
1 On the Home screen, scroll to .
2 Select .
3 Select a desired frame.
Wall Art
Panel off
Using Scene modes
Extended functions 53
Option Description
Miniature
Apply a tilt-shift effect to make the subject appear in
miniature. (The top and bottom of the photo will be
blurred.)
Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.
Ink Painting Apply a watercolor painting effect.
Oil Painting Apply an oil painting effect.
Cartoon Apply a cartoon painting effect.
Cross Filter Add lines that radiate outward from bright objects to imitate the visual effect of a cross filter.
Sketch Apply a pen sketch effect.
Soft Focus Hide facial imperfections or apply dreamy effects.
Fish-eye Distort close objects to imitate the visual effect of a fisheye lens.
Old Film Apply a vintage film effect.
Half Tone Dot Apply a halftone effect.
Classic Apply a black and white effect.
Retro Apply a sepia tone effect.
Zooming Shot Blur the edges of a photo to emphasize the subjects in the center.
Using the Photo Filter mode
Apply various filter effects to your photos to create unique images.
Miniature Vignetting
Fish-eye Sketch
1 On the Home screen, scroll to .
2 Select .
3 Select an effect.
Using Scene modes
Extended functions 54
4 Align your subject in the frame, and then half-press [Shutter] to
focus.
5 Press [Shutter] to capture a photo.
• Depending on the option you select, the resolution may change to or smaller
automatically.
• To apply filter effects to saved photos, press [m], and then select Open
Image → a desired image.
Using the Movie Filter mode
Apply various filter effects to your videos to create unique images.
This mode is available only when you insert a memory card into the camera.
1 On the Home screen, scroll to .
2 Select .
3 Select an effect.
Option Description
Miniature
Apply a tilt-shift effect to make the subject appear in
miniature. (The top and bottom of the photo will be
blurred.)
Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.
Option Description
Half Tone Dot Apply a halftone effect.
Sketch Apply a pen sketch effect.
Fish-eye Distort close objects to imitate the visual effect of a fisheye lens.
Classic Apply a black and white effect.
Retro Apply a sepia tone effect.
Palette Effect 1 Create a vivid look with sharp contrast and strong color.
Palette Effect 2 Make scenes clean and clear.
Palette Effect 3 Apply a soft brown tone.
Palette Effect 4 Create a cold and monotone effect.
4 Press [Shutter] to start recording.
5 Press [Shutter] again to stop recording.
• If you select Miniature, playback speed will increase.
• If you select Miniature, you cannot record sound in the video.
• Depending on the option you select, the recording resolution may change to
or smaller automatically.
Using Scene modes
Extended functions 55
Using the Split Shot mode
In Split Shot mode, you can capture several photos and arrange them with preset
layouts.
1 On the Home screen, scroll to .
2 Select .
3 Select a split style.
• To adjust the sharpness of the dividing line, press [m], and then select
Line Blur → a desired value.
• To apply a Smart Filter effect to part of the shot, press [m], and then
select Smart Filter → a desired option. You can apply different Smart Filter
effects to each part of the shot.
Panel off
4 Align your subject in the frame, and then half-press [Shutter] to
focus.
5 Press [Shutter] to capture a photo.
• Repeat steps 4 and 5 to capture the rest of the photos.
• To recapture a photo, press [f].
The resolution is automatically set to or smaller.
Using Scene modes
Extended functions 56
Using the Motion Photo mode
In Motion Photo mode, you can capture and combine a series of photos, and then
select an area to be animated to create a GIF animation. This mode is available only
when you insert a memory card into the camera.
1 On the Home screen, scroll to .
2 Select .
3 Align your subject in the frame, and then half-press [Shutter] to
focus.
4 Press [Shutter] to capture the photo.
• The camera captures multiple photos while the status lamp is blinking.
5 Press [D/c/F/t] to scroll to an area to be animated.
• To recapture a photo, press [m].
6 Rotate [Zoom] to the left or right to reduce or enlarge the area.
Cancel Save
Frame Size
Select a part to be animated.
7 Press [o] to save the photo.
• The resolution is automatically set to .
• Use a tripod to prevent your camera from shaking.
• It may take longer to save files.
Selecting a resolution and quality …………… 58
Selecting a resolution ………………………… 58
Selecting an image quality …………………… 59
Using the timer ………………………………… 60
Shooting in the dark …………………………… 61
Preventing red-eye …………………………… 61
Using the flash ………………………………… 61
Adjusting the ISO sensitivity …………………… 63
Changing the camera’s focus …………………… 64
Using macro …………………………………… 64
Changing the focus option …………………… 64
Adjusting the focus area ……………………… 65
Using Face Detection …………………………… 67
Detecting faces ………………………………… 67
Capturing a smile shot ………………………… 67
Detecting eye blinking ………………………… 68
Tips for detecting faces ………………………… 68
Adjusting brightness and color ………………… 69
Adjusting the exposure manually (EV) ………… 69
Compensating for backlighting (ACB) ………… 70
Changing the metering option ………………… 70
Selecting a White Balance setting ……………… 71
Using burst modes ……………………………… 73
Adjusting images ………………………………… 74
Reducing the sound of the zoom ……………… 75
Available shooting options by shooting mode … 76
Shooting options
Learn how to set the options in Shooting mode.
Shooting options 58
Selecting a resolution
As you increase the resolution, your photo or video will include more pixels, so it
can be printed on larger paper or displayed on a larger screen. When you use a high
resolution, the file size will also increase.
Setting the photo resolution
1 In Shooting mode, press [m].
2 Select Photo Size.
3 Select an option.
Icon Description
4608 X 3456: Print on A1 paper.
4608 X 3072: Print on A1 paper in wide ratio (3:2).
4608 X 2592: Print on A1 paper in panorama ratio (16:9) or play
back on an HDTV.
3648 X 2736: Print on A2 paper.
2592 X 1944: Print on A4 paper.
1984 X 1488: Print on A5 paper.
1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play
back on an HDTV.
1024 X 768: Attach to an email.
Setting the video resolution
1 In Video Shooting mode, press [m].
2 Select Movie Size.
3 Select an option.
Icon Description
1280 X 720: HD files to play back on an HDTV.
640 X 480: SD files to play back on an analog TV.
320 X 240: Post on a web page.
For Sharing (ST150F/ST151F/ST152F only): Post on a website using
the wireless network (30 seconds maximum).
Selecting a resolution and quality
Learn how to change the image resolution and quality settings.
Selecting a resolution and quality
Shooting options 59
Selecting an image quality
Set a photo quality settings. Higher image quality settings will result in larger file
sizes. The camera compresses and saves the photos you capture in the JPEG format.
1 In Shooting mode, press [m].
2 Select Quality.
3 Select an option.
Icon Description
Super Fine: Capture photos in super high quality.
Fine: Capture photos in high quality.
Normal: Capture photos in normal quality.
Shooting options 60
1 In Shooting mode, press [t].
Off
10 Sec
2 Sec
Double
Timer
Exit Select
2 Select an option.
Icon Description
Off: The timer is not active.
10 Sec: Capture a photo after a 10-second delay.
2 Sec: Capture a photo after a 2-second delay.
Double: Capture one photo after a 10-second delay and another
photo after a 2-second delay.
Available options may differ depending on the shooting conditions.
3 Press [Shutter] to start the timer.
• The AF-assist light/timer lamp blinks. The camera will automatically capture a
photo after the specified time has elapsed.
• Press [Shutter] or [t] to cancel the timer.
• Depending on the Face Detection options you selected, the timer function may
not be available.
• Timer options are not available if you set burst options.
• In some modes, you can also set the timer option by pressing [m], and then
selecting Timer.
Using the timer
Learn how to set the timer to delay shooting.
Shooting options 61
Preventing red-eye
If the flash fires when you capture a photo of a person in the dark, a red glow may
appear in the person’s eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to
flash options in "Using the flash."
 Before correction  After correction
Using the flash
Use the flash when you capture photos in the dark or when you need more light in
your photos.
1 In Shooting mode, press [F].
Exit Select
Flash
Off
Auto
Red-eye
Fill in
Slow Sync
Red-eye Fix
2 Select an option.
Icon Description
Off:
• The flash will not fire.
• The camera will display the shake warning when you are
shooting in low light.
Auto: The camera will select a proper flash setting for the scene it
detects in Smart Auto mode.
Shooting in the dark
Learn how to capture photos at night or in low light conditions.
Shooting in the dark
Shooting options 62
Icon Description
Auto: The flash will fire automatically when the subject or
background is dark.
Red-eye:
• The flash will fire twice when the subject or background is dark to
reduce the red-eye effect.
• There is an interval between the 2 bursts of the flash. Do not move
until the flash fires a second time.
Fill in:
• The flash always fires.
• The camera automatically adjusts light intensity.
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to capture more
ambient light to reveal more details in the background.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning when you are
shooting in low light.
Red-eye Fix:
• The flash fires twice when the subject or background is dark. The
camera corrects red-eyes through its advanced software analysis.
• There is an interval between the 2 bursts of the flash. Do not move
until the flash fires a second time.
Available options may differ depending on the shooting conditions.
• Flash options are not available if you set burst options or select Blink Detection.
• Make sure that your subjects are within the recommended distance from the
flash. (p. 142)
• If light from the flash is reflected or there is a substantial amount of dust in the
air, tiny spots may appear in your photo.
• In some modes, you can also set the flash option by pressing [m], and then
selecting Flash.
Shooting in the dark
Shooting options 63
Adjusting the ISO sensitivity
The ISO sensitivity is the measure of a film’s sensitivity to light as defined by the
International Organization for Standardization (ISO). The higher ISO sensitivity you
select, the more sensitive to light your camera becomes. Use a higher ISO sensitivity
to capture better photos and reduce camera shake when not using the flash.
1 In Shooting mode, press [m].
2 Select ISO.
3 Select an option.
• Select to use an appropriate ISO sensitivity based on the brightness of
the subject and lighting.
Higher ISO sensitivities may result in more image noise.
Shooting options 64
Changing the camera’s focus
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.
Changing the focus option
You can get clearer photos by selecting an appropriate focus option according to
the distance between the camera and subjects.
1 In Shooting mode, press [c].
Exit Select
Focus
Normal (AF)
Macro
Using macro
Use macro to capture close-up photos of subjects, such as flowers or insects. (Refer
to "Changing the focus option".)
• Try to hold the camera firmly to prevent blurry photos.
• Turn off the flash if the distance to the subject is less than 40 cm.
Changing the camera’s focus
Shooting options 65
Adjusting the focus area
You can get clearer photos by selecting an appropriate focus area according to your
subject's location in the scene.
1 In Shooting mode, press [m].
2 Select Focus Area.
3 Select an option.
Icon Description
Center AF: Focus on the center of the frame (suitable when subjects
are located at or near the center).
Multi AF: Focus on one or more of 9 possible areas.
Tracking AF: Focus on and track the subject. (p. 66)
Available shooting options may differ depending on the shooting conditions.
2 Select an option.
Icon Description
Normal (AF): Focus on a subject farther than 31 in. (80 cm) away.
Farther than 98 in. (250 cm) away when you use the zoom.
Macro: Focus on a subject that is 2-31 in. (5-80 cm) from the
camera. 39-98 in. (100–250 cm) cm when you use the zoom.
Auto Macro:
• Focus on a subject farther than 2 in. (5 cm) away.
Farther than 39 in. (100 cm) away when you use the zoom.
• Auto Macro is set automatically in some modes. You cannot set it
manually.
Available options may differ depending on the shooting conditions.
In some modes, you can also set the focus option by pressing [m], and then
selecting Focus.
Changing the camera’s focus
Shooting options 66
• If you do not select a focus area, the focus frame will appear in the center of the
screen.
• Tracking a subject may fail when:
- the subject is too small
- the subject moves excessively
- the subject is backlit or you are shooting in a dark place
- colors or patterns on the subject and the background are the same
- the subject includes horizontal patterns, such as blinds
- the camera shakes excessively
• When tracking fails, the feature will be reset.
• If the camera fails to track the subject, you must reselect the subject to track.
• If the camera fails to focus, the focus frame will change to red and the focus will
be reset.
• If you use this function, you cannot set Face Detection options, Timer options,
Burst options, and Intelli zoom.
Using tracking auto focus
Tracking AF allows you to track and auto focus on your subject, even when you are
moving.
1 In Shooting mode, press [m].
2 Select Focus Area → Tracking AF.
3 Focus on the subject you want to track, and then press [o].
• A focus frame appears on the subject and follows the subject as you move
the camera.
• The white frame means that your camera is tracking the subject.
• When you half-press [Shutter], the green frame means that your subject is in
focus.
• The red frame means that your camera failed to focus.
4 Press [Shutter] to capture the photo.
Shooting options 67
Detecting faces
Your camera automatically detects up to 10 human faces in one scene.
1 In Shooting mode, press [m].
2 Select Face Detection → Normal.
The face nearest the camera or nearest
the center of the scene appears in a
white focus frame and the rest of the
faces appear in gray focus frames.
The closer you are to the subjects, the quicker your camera will detect faces.
Capturing a smile shot
The camera automatically releases the shutter when it detects a smiling face.
1 In Shooting mode, press [m].
2 Select Face Detection → Smile Shot.
3 Compose your shot.
• The camera automatically releases the shutter when it detects a smiling face.
When your subject smiles
broadly, your camera can detect
the smile more easily.
Using Face Detection
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use
Blink Detection to detect closed eyes or Smile Shot to capture a smiling face.
Using Face Detection
Shooting options 68
Detecting eye blinking
If your camera detects closed eyes, it will automatically capture 2 photos in
succession.
1 In Shooting mode, press [m].
2 Select Face Detection → Blink Detection.
Tips for detecting faces
• When your camera detects a face, it tracks the detected face automatically.
• Face Detection may not be effective when:
- the subject is far from the camera (The focus frame will appear orange for Smile
Shot and Blink Detection.)
- it is too bright or too dark
- the subject is not facing the camera
- the subject is wearing sunglasses or a mask
- the subject’s facial expression changes drastically
- the subject is backlit or the lighting conditions are unstable
• When you set Face Detection options, the AF area is automatically set to Multi AF.
• Depending on the Face Detection options you selected, some shooting options
may not be available.
• Depending on the shooting options you selected, Face Detection options may
not be available.
Shooting options 69
3 Press [F/t] to adjust the exposure.
• The photo will be brighter as the exposure value increases.
Cancel Set
EV : 0
4 Press [o] to save your settings.
• Once you adjust the exposure, the setting will be stored automatically. You
may need to change the exposure value later to avoid overexposure or
underexposure.
• If you cannot decide on an appropriate exposure, select the AEB (Auto Exposure
Bracket) option. The camera will capture 3 consecutive photos, each with a
different exposure: normal, underexposed, and overexposed. (p. 73)
Adjusting the exposure manually (EV)
Depending on the intensity of the ambient light, your photos may be too bright or
dark. In these cases, you can adjust the exposure to get a better photo.
 Darker (-)  Neutral (0)  Brighter (+)
1 In Shooting mode, press [m].
2 Select EV.
Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.
Adjusting brightness and color
Shooting options 70
Changing the metering option
The metering mode refers to the way in which a camera measures the quantity
of light. The brightness and lighting of your photos will vary depending on the
metering mode you select.
1 In Shooting mode, press [m].
2 Select Metering.
3 Select an option.
Icon Description
Multi:
• Your camera divides the frame into several areas, and then
measures the light intensity of each area.
• Suitable for general photos.
Spot:
• Your camera measures only the light intensity at the very center
of the frame.
• If a subject is not in the center of the frame, your photo may be
improperly exposed.
• Suitable for a subject with backlighting.
Center-weighted:
• Your camera averages the meter reading of the entire frame with
emphasis placed on the center.
• Suitable for photos with subjects in the center of the frame.
Compensating for backlighting (ACB)
When the light source is behind your subject or there is high contrast between your
subject and the background, your subject is likely to appear dark in the photo. In
this case, set the Auto Contrast Balance (ACB) option.
▲ Without ACB ▲ With ACB
1 In Shooting mode, press [m].
2 Select ACB.
3 Select an option.
Icon Description
Off: ACB (Auto Contrast Balance) is deactivated.
On: ACB (Auto Contrast Balance) is activated.
• The ACB feature is always on in Smart Auto mode.
• The ACB feature is not available when you set Burst options.
Adjusting brightness and color
Shooting options 71
1 In Shooting mode, press [m].
2 Select White Balance.
3 Select an option.
Icon Description
Auto WB: Automatically set the White Balance based on the
lighting conditions.
Daylight: For outdoor photos on a sunny day.
Cloudy: For outdoor photos on a cloudy day or in shadows.
Fluorescent_H: For shooting under a daylight fluorescent or 3-way
fluorescent light.
Fluorescent_L: For shooting under white fluorescent light.
Tungsten: For shooting indoor photos under incandescent bulbs
or halogen lamps.
Custom Set: To use White Balance settings that you define. (p. 72)
Selecting a White Balance setting
The color of your photo depends on the type and quality of the light source. If you
want the color of your photo to be realistic, select a White Balance setting that
is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or
Tungsten.
Auto WB Daylight
Cloudy Tungsten
Adjusting brightness and color
Shooting options 72
Defining your own White Balance
You can customize the White Balance by capturing a photo of a white surface, such
as a piece of paper, under the lighting conditions in which you intend to capture a
photo. The White Balance feature will help you to match the colors in your photo
with the actual scene.
1 In Shooting mode, press [m].
2 Select White Balance → Custom Set.
3 Aim the lens at a piece of white paper, and then press [Shutter].
Shooting options 73
1 In Shooting mode, press [m].
2 Select Drive.
3 Select an option.
Icon Description
Single: Capture a single photo.
Continuous:
• While you are pressing [Shutter], the camera continuously
captures photos.
• The maximum number of photos depends on the capacity of
your memory card.
Icon Description
Motion Capture: While you are pressing [Shutter], the camera
captures photos (5 photos per second; maximum of
30 photos).
AEB:
• Capture 3 consecutive photos, each with a different exposure:
normal, underexposed, and overexposed.
• It may take longer to capture the photo. Use a tripod for best
results.
Available options may differ depending on the shooting conditions.
• When you select Motion Capture, your camera will set the resolution to
and set the ISO sensitivity to Auto.
• Depending on the Face Detection option you selected, some shooting options
may not be available.
• It may take longer to save the photos depending on the memory card capacity
and performance.
Using burst modes
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be difficult to adjust the
exposure correctly and select a proper light source. In these cases, select one of the burst modes.
Shooting options 74
1 In Shooting mode, press [m].
2 Select Image Adjust.
3 Select an option.
• Sharpness
• Contrast
• Saturation
Image Adjust
Sharpness
Contrast
Saturation
Cancel Set
4 Press [F/t] to adjust each value.
Sharpness Description
- Soften the edges on your photos (suitable for editing the photos on your computer).
+ Sharpen the edges to improve the clarity of your photos. (This may also increase the noise in your photos.)
Contrast Description
- Decrease the color and brightness.
+ Increase the color and brightness.
Saturation Description
- Decrease the saturation.
+ Increase the saturation.
5 Press [o] to save your settings.
Select 0 if you do not want to apply any effects (suitable for printing).
Adjusting images
Adjust the sharpness, contrast, or saturation of your photos.
Shooting options 75
1 In Video Shooting mode, press [m].
2 Select Voice.
3 Select an option.
Icon Description
Sound Alive On: Turn on the Sound Alive function to reduce the
zoom noise.
Sound Alive Off: Turn off the Sound Alive function.
The camera can record the zoom noise.
Mute: Do not record sounds.
• Do not block the microphone when you use the Sound Alive function.
• Recordings made with Sound Alive may differ from actual sounds.
Reducing the sound of the zoom
When you use the zoom while recording videos, the camera can record the sound of the zoom. Use the Sound Alive function to reduce the zoom noise.
Shooting options 76
Available shooting options by shooting mode
For details about shooting options, refer to "Shooting options". (p. 57)
Mode
Option Smart Auto Program Smart Movie Movie Scene Live Panorama Beauty Shot
Resolution ● ● ● ● ● ● ●
Quality ● ● ● ● ● ● ●
Timer ● ● ● ● ● – ●
Flash ● ● – – ● – ●
ISO Sensitivity – ● – – – – –
Macro ● ● – ● ● – –
Focus Area – ● – – – – –
Face Detection ● ● – – ● – ●
EV – ● – ● – – –
ACB ● ● – – – – –
Metering – ● – ● – – –
White Balance – ● – ● – – –
Drive – ● – – – – –
Image Adjust – ● – – – – –
Sound Alive – – ● ● – – –
Digital zoom – ● – – ● – –
Intelli zoom ● ● – – ● – –
DIS – ● – – – – –
●: The option is available. Some options may be limited or may not be changeable.
–: The option is not available.
Available shooting options by shooting mode
Shooting options 77
Mode
Option Night Shot Close-up Shot Magic Frame Photo Filter Movie Filter Split Shot Motion Photo
Resolution ● ● ● ● ● ● ●
Quality ● ● ● ● ● ● ●
Timer ● ● ● ● ● ● ●
Flash ● – ● ● – ● –
ISO Sensitivity – – – – – – –
Macro – ● – – – – –
Focus Area – – – – – – –
Face Detection – – – – – – –
EV – – – – – – –
ACB – – – – – – –
Metering – – – – – – –
White Balance – – – – – – –
Drive – – – – – – –
Image Adjust – – – – – – –
Sound Alive – – – – ● – –
Digital zoom – – – – – – –
Intelli zoom – – – – – – –
DIS – – – – – – –
●: The option is available. Some options may be limited or may not be changeable.
–: The option is not available.
Viewing photos or videos in Playback mode … 79
Starting Playback mode ……………………… 79
Viewing photos ………………………………… 84
Playing a video ………………………………… 87
Editing a photo ………………………………… 89
Resizing photos ………………………………… 89
Rotating a photo ……………………………… 89
Applying Smart Filter effects …………………… 90
Adjusting your photos ………………………… 91
Viewing files on a TV …………………………… 93
Transferring files to the computer …………… 94
Transferring files to your Windows OS
computer ……………………………………… 94
Transferring files to your Mac OS computer …… 95
Using programs on a computer ……………… 96
Installing i-Launcher …………………………… 96
Using i-Launcher ……………………………… 97
Playback/Editing
Learn how to play back photos or videos, and edit photos or videos. Also, learn how to connect your camera to
your computer or TV.
Playback/Editing 79
Viewing photos or videos in Playback mode
Learn how to play back photos or videos and how to manage files.
Photo file information
File Information
Memory in use
Album/Zoom In
Icon Description
Current file/Total files
Folder name–File name
GIF file
Protected file
To display file information on the screen, press [D].
Starting Playback mode
View photos or play videos stored in your camera.
1 Press [P].
• The most recent file will be displayed.
• If the camera is off, it will turn on and display the most recent file.
• To view files by category, select on the Home screen. (p. 81)
2 Press [F/t] to scroll through files.
• Press and hold [F/t] to scroll through files quickly.
• If you want to view files stored in the internal memory, remove your memory
card.
• You may not be able to edit or play back files that were captured with other
cameras, due to unsupported sizes (image size, etc) or codecs. Use a computer
or another device to edit or play back these files.
• Photos or videos captured in portrait orientation do not rotate automatically and
are displayed in landscape orientation by the camera and other devices.
Viewing photos or videos in Playback mode
Playback/Editing 80
Video file information
Play Capture
File Information
Album
Icon Description
Current file/Total files
Folder name-File name
Current playback time
Video length
Protected file
To display file information on the screen, press [D].
Viewing files as thumbnails
Scan thumbnails of files.
In Playback mode, rotate [Zoom] to the left to view thumbnails
(12 at a time). Rotate [Zoom] to the left once more to display more
thumbnails (24 at a time). Rotate [Zoom] to the right to return to
the previous view.
Menu
• You can also view files as thumbnails by scrolling to on the Home
screen, and then selecting .
Press [D/c/F/t] to scroll through files.
Viewing photos or videos in Playback mode
Playback/Editing 81
Viewing files by category
View files by category, such as date or file type.
1 In Playback mode, rotate [Zoom] to the left.
• You can also view files as thumbnails by scrolling to on the Home
screen, and then selecting .
2 Press [m].
3 Select Filter → a category.
All
Date
File Type
Back Select
Filter
Icon Description
All: View files normally.
Date: View files by the date they were saved.
File Type: View files by the file type.
4 Scroll to a desired list, and then press [o] to open the list.
5 Scroll to a desired file, and then press [o] to view the file.
6 Rotate [Zoom] to the left, and then press [m] to return to the
previous view.
• If you change the category, it may take some time for the camera to reorganize
files depending on the number of files.
• If you delete a category classified by Date or File Type, all files in the category
will be deleted.
Viewing photos or videos in Playback mode
Playback/Editing 82
Protecting a file
Protect a file from accidental deletion.
1 In Playback mode, select a file to protect.
2 Press [m], and then select Protect → On.
3 Repeat steps 1 and 2 to protect additional files.
You cannot delete, resize, or rotate a protected file.
Deleting files
Select files to delete in Playback mode.
Deleting a single file
You can select one file, and then delete it.
1 In Playback mode, select a file, and then press [f].
2 When the pop-up message appears, select Yes.
You can also delete files in Playback mode by pressing [m], and then selecting
Delete → Delete → Yes.
Viewing photos or videos in Playback mode
Playback/Editing 83
Deleting multiple files
You can select multiple files, and then delete them at once.
1 In Playback mode, press [f].
• When in thumbnails view, press [m], select Delete → Select, and then
skip to step 3, or press [f], select Select, and then skip to step 3.
2 When the pop-up message appears, select Multiple Delete.
3 Scroll to each file you want to delete, and then press [o].
• Press [o] again to cancel your selection.
4 Press [f].
5 When the pop-up message appears, select Yes.
Deleting all files
You can select all files, and then delete them at once.
1 In Playback mode, press [m].
• When in thumbnails view, press [m], select Delete → Delete All, and then
skip to step 3, or press [f], select Delete All, and then skip to step 3.
2 Select Delete → Delete All.
3 When the pop-up message appears, select Yes.
• All unprotected files are deleted.
Copying files to a memory card
Copy files from the internal memory to a memory card.
1 In Playback mode, press [m].
2 Select Copy to Card.
Viewing photos or videos in Playback mode
Playback/Editing 84
Viewing photos
Enlarge part of a photo or view photos as a slide show.
Enlarging a photo
In Playback mode, rotate [Zoom] to the right to enlarge a portion of
the photo. Rotate [Zoom] to the left to zoom out.
Enlarged area
Crop
To Description
Move the enlarged area Press [D/c/F/t].
Trim the enlarged photo
Press [o], and then select Yes.
(The trimmed photo will be saved as a new file. The
original photo is retained in its original form.)
When you view photos that were captured by another camera, the zoom ratio may
differ.
Viewing photos or videos in Playback mode
Playback/Editing 85
Viewing panoramic photos
View photos captured in Live Panorama mode.
1 In Playback mode, press [F/t] to scroll to a desired panoramic
photo.
• The entire panoramic photo appears on the screen.
2 Press [o].
• The camera automatically scrolls through the photo from left to right for a
horizontal panoramic photo and from top to bottom for a vertical panoramic
photo. The camera then switches to Playback mode.
• While playing back a panoramic photo, press [o] to pause or resume.
• After you have paused the playback of a panoramic photo, press
[D/c/F/t] to move the photo horizontally or vertically, depending on
the direction you moved when capturing the photo.
3 Press [m] to return to Playback mode.
The camera automatically scrolls through the panoramic photo only if the longest
side of the photo is two or more times longer than the shortest side.
Viewing animated photos
View animated GIF files repeatedly that were captured in Motion Photo mode.
1 In Playback mode, press [F/t] to scroll to a desired GIF file.
2 Press [o].
• The GIF file plays back repeatedly.
3 Press [o] to stop playing back.
Viewing photos or videos in Playback mode
Playback/Editing 86
Playing a slide show
Apply effects and audio to a slide show of your photos. The slide show function
does not work for videos and GIF files.
1 In Playback mode, press [m].
2 Select Slide Show Options.
• Skip to step 5 to start a slide show with no effects.
3 Select a slide show effect option.
* Default
Option Description
Play Mode Set whether or not to repeat the slide show. (One Play*, Repeat)
Interval
• Set the interval between photos. (1 sec*, 3 sec, 5 sec, 10 sec)
• You must set the Effect option to Off to set the interval.
Music Set background audio.
Effect
• Set a scene change effect between photos. (Off, Calm*, Shine,
Relax, Lively, Sweet)
• Select Off to cancel effects.
• When you use the Effect option, the interval between photos
will be set to 1 second.
4 Press [m].
5 Select Start Slide Show.
6 View the slide show.
• Press [o] to pause the slide show.
• Press [o] again to resume the slide show.
• Press [o], and then press [F/t] to stop the slide show and return to Playback
mode.
• Rotate [Zoom] to the left or right to adjust the volume level.
Viewing photos or videos in Playback mode
Playback/Editing 87
Playing a video
In Playback mode, you can view a video, and then capture or trim parts of the
playing video. You can save the captured or trimmed segments as new files.
1 In Playback mode, select a video, and then press [o].
2 View the video.
Pause Stop
Current playback time/
Video length
To Description
Scan backward
Press [F]. Each time you press [F], you
change the scan speed in this order: 2X, 4X,
8X.
Pause or resume playback Press [o].
Scan forward
Press [t]. Each time you press [t], you
change the scan speed in this order: 2X, 4X,
8X.
Adjust the volume level Rotate [Zoom] to the left or right.
When playing a movie, you can begin using features such a scanning backward,
scanning forward, or pausing after the video has run for 2 seconds.
Viewing photos or videos in Playback mode
Playback/Editing 88
Trimming a video
1 In Playback mode, select a video, and then press [m].
2 Select Trim Movie.
3 Press [o] to start playing the video.
4 Press [o] → [c] at the point where you want the trimming to
begin.
5 Press [o] to resume playing the video.
6 Press [o] → [c] at the point where you want the trimming to end.
7 Press [c] to trim.
8 When the pop-up message appears, select Yes.
• The original video should be at least 10 seconds long.
• The camera will save the edited video as a new file and leave the original video
intact.
Capturing an image from video
1 While viewing a video, press [o] at the point where you want to
capture an image.
2 Press [c].
• The resolution of the captured image will be the same as the original video.
• The captured image is saved as a new file.
Playback/Editing 89
Editing a photo
Learn how to edit photos.
• The camera will save edited photos as new files.
• When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower
resolution.
• Photos captured in some modes cannot be edited.
Rotating a photo
1 On the Home screen, scroll to .
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select Rotate → an option.
5 Press [c] to save.
Cancel Save
Rotate : Right 90˚
• The camera will overwrite the original file.
• In Playback mode, press [m], and then select Rotate to rotate a photo.
Resizing photos
Change the size of a photo and save it as a new file.
1 In Playback mode, select a photo, and then press [m].
2 Select Resize.
3 Select an option.
Back Select
2592 X 1944
1984 X 1488
1024 X 768
Resize
Available resize options differ depending on the original size of the photo.
Editing a photo
Playback/Editing 90
Applying Smart Filter effects
Apply special effects to your photos.
1 On the Home screen, scroll to .
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select Smart Filter → an option.
Back Set
Smart Filter : Miniature
Option Description
Normal No effect
Miniature
Apply a tilt-shift effect to make the subject appear in
miniature. (The top and bottom of the photo will be
blurred.)
Option Description
Vignetting
Apply the retro-looking colors, high contrast, and strong
vignette effect of Lomo cameras.
Ink Painting Apply a watercolor painting effect.
Oil Painting Apply an oil painting effect.
Cartoon Apply a cartoon painting effect.
Cross Filter
Add lines that radiate outward from bright objects to
imitate the visual effect of a cross filter.
Sketch Apply a pen sketch effect.
Soft Focus Hide facial imperfections or apply dreamy effects.
Fish-eye
Distort close objects to imitate the visual effect of a fisheye
lens.
Old Film Apply a vintage film effect.
Half Tone Dot Apply a halftone effect.
Classic Apply a black and white effect.
Retro Apply a sepia tone effect.
Zooming Shot
Blur the edges of a photo to emphasize the subjects in the
center.
5 Press [c] to save.
Editing a photo
Playback/Editing 91
Adjusting your photos
Learn how to adjust the brightness, contrast, or saturation or how to correct the
red-eye effect. If the center of a photo is dark, you can adjust it to be brighter.
The camera will save an edited photo as a new file, but may convert it to a lower
resolution.
• You can adjust brightness, contrast, and saturation and apply Smart Filter effects
at the same time.
• You cannot apply the ACB, Face Retouch, and Red-eye Fix effects at the same
time.
Adjusting brightness, contrast, or saturation
1 On the Home screen, scroll to .
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select an adjusting option.
Icon Description
Brightness
Contrast
Saturation
5 Press [F/t] to adjust the option.
6 Press [o].
7 Press [c] to save.
Adjusting dark subjects (ACB)
1 On the Home screen, scroll to .
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select ACB.
5 Press [c] to save.
Editing a photo
Playback/Editing 92
Retouching faces
1 On the Home screen, scroll to .
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select Face Retouch.
5 Press [F/t] to adjust the option.
• As the number increases, the skin tone becomes brighter and smoother.
6 Press [c] to save.
Removing red-eye
1 On the Home screen, scroll to .
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select Red-eye Fix.
5 Press [c] to save.
Playback/Editing 93
1 On the Home screen, scroll to .
2 Select .
3 Select Connectivity → Video Out.
4 Select the video signal output for your country or region. (p. 124)
5 Turn off your camera and TV.
6 Connect your camera to your TV with the A/V cable.
VideoAudio
7 Turn on your TV, and then select the A/V video source.
8 Turn on your camera.
• The camera automatically enters into Playback mode when you connect it to
a TV.
9 View photos or play videos using the camera buttons.
• Depending on the TV model, you may see some digital noise or part of an image
may not appear.
• Images may not be centered on the TV screen depending on your TV settings.
Viewing files on a TV
Play back photos or videos by connecting your camera to a TV with the A/V cable.
Playback/Editing 94
Transferring files to your Windows OS computer
Connect the camera to your computer as a removable disk.
Your computer must be running Windows XP, Windows Vista, , Windows 7, or
Windows 8 for you to connect the camera as a removable disk.
1 On the Home screen, scroll to .
2 Select .
3 Select Connectivity → i-Launcher → Off.
4 Turn off the camera.
5 Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is
reversed, it may damage your files. The manufacturer is not responsible for any
loss of data.
6 Turn on the camera.
• The computer recognizes the camera automatically.
7 On your computer, select My Computer → Removable Disk →
DCIM → 100PHOTO.
8 Drag or save files to your computer.
Disconnecting the camera (for Windows XP)
With Windows Vista , Windows 7 and Windows 8 the methods for disconnecting the
camera are similar.
1 If the status lamp on your camera is blinking, wait until it stops.
2 Click on the tool bar at the bottom right of your computer screen.
3 Click the pop-up message.
4 Click the message box that indicates the camera can be removed
safely.
5 Remove the USB cable.
Transferring files to the computer
Connect the camera to a computer to transfer files from the camera's memory card to the computer.
Transferring files to the computer
Playback/Editing 95
Transferring files to your Mac OS computer
When you connect the camera to your Mac OS computer, the computer will
automatically recognize the device. You can transfer files directly from the camera to
the computer without installing any programs.
Mac OS 10.5 or later (except PowerPC) is supported.
1 Turn off the camera.
2 Connect your camera to your Mac OS computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is
reversed, it may damage your files. The manufacturer is not responsible for any
loss of data.
3 Turn on the camera.
• The computer recognizes the camera automatically and displays a removable
disk icon.
4 Double-click the removable disk icon.
5 Drag or save files to your computer.
Playback/Editing 96
Using programs on a computer
i-Launcher allows you to playback files with Multimedia Viewer and provides links so that you can download useful programs.
6 Turn on the camera.
7 Select a destination folder on your computer, and then select Yes.
• If a pop-up window prompting you to run iLinker.exe appears, run it first.
• When you connect the camera to a computer with i-Launcher installed, the
program will launch automatically.
8 Follow the on-screen instructions to complete the installation.
• An i-Launcher shortcut will appear on the computer.
• Before installing the program, ensure that the PC is connected to a network.
• To install i-Launcher on your Mac OS computer, click Devices → i-Launcher →
Mac → iLinker.
Installing i-Launcher
1 On the Home screen, scroll to .
2 Select .
3 Select Connectivity → i-Launcher → On.
4 Turn off the camera.
5 Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is
reversed, it may damage your files. The manufacturer is not responsible for any
loss of data.
Using programs on a computer
Playback/Editing 97
Available programs when using i-Launcher
Option Description
Multimedia Viewer You can view files with Multimedia Viewer.
Firmware Upgrade You can update the firmware of your camera.
PC Auto Backup
(ST150F/ST151F/
ST152F only)
i-Launcher provides a link for downloading the PC
Auto Backup program when you connect the camera
to a computer. You can send photos or videos that you
captured with the camera to a PC wirelessly.
If you use a Mac OS computer, only Firmware Upgrade and PC Auto Backup are
available.
Using i-Launcher
i-Launcher allows you to play back files with Multimedia Viewer and provides a link
to download the PC Auto Backup program.
• The requirements are recommendation only. i-Launcher may not work properly
even when the computer meets the requirements, depending on the condition
of your computer.
• If your computer does not meet the requirements, videos may not play correctly.
The manufacturer is not responsible for any damage that results from using
unqualified computers such as a computer you assembled yourself.
Using programs on a computer
Playback/Editing 98
Windows OS Requirements
Item Requirements
CPU Intel® Pentium®4 3.2 GHz or higher/ AMD Athlon™ FX 2.6 GHz or higher
RAM Minimum 512 MB RAM (1 GB or more recommended)
OS* Windows XP SP2, Windows Vista, , Windows 7, or Windows 8
Hard disk capacity 250 MB or more (1 GB and above recommended)
Others
• 1024 X 768 pixels, 16-bit color display compatible
monitor (1280 X 1024 pixels, 32-bit color display
recommended)
• USB 2.0 port
• nVIDIA Geforce 7600GT or higher/
ATI X1600 series or higher
• Microsoft DirectX 9.0c or higher
* A 32-bit version of i-Launcher will be installed—even on 64-bit editions of Windows XP,
Windows Vista, Windows 7, and Windows 8.
Mac OS requirements
Item Requirements
OS Mac OS 10.5 or higher (except PowerPC)
RAM Minimum 256 MB RAM (512 MB or more recommended)
Hard disk capacity Minimum 110 MB
Others USB 2.0 port
Opening i-Launcher
On your computer, select Start → All Programs → Samsung → i-Launcher →
Samsung i-Launcher. On your Mac, click Applications → Samsung → i-Launcher.
Using programs on a computer
Playback/Editing 99
Using Multimedia Viewer
Multimedia Viewer allows you to play back files. From the Samsung i-Launcher screen, click Multimedia Viewer.
• Multimedia Viewer supports the following formats:
- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
- Photos: JPG, GIF, BMP, PNG, TIFF, MPO
• Files that have been recorded with other manufacturers’ devices may not play back smoothly.
Viewing photos
6790! 8 5 4
3
1
2
66%
No. Description
1 File name
2 Enlarged area
3 Histogram
4 Open the selected file.
5 Histogram button
6 Rotate to the left/Rotate to the right.
7 Move to the previous file/Move to the next file.
8 Fit the photo to the screen.
9 View the photo in its original size.
0 Zoom in/Zoom out
! Switch between 2D and 3D mode.
Using programs on a computer
Playback/Editing 100
Viewing Videos
68 5 4 3
1
2
7
No. Description
1 File name
2 Adjust the volume.
3 Open the selected file.
4 Move to the next file.
5 Stop
6 Pause
7 Move to the previous file.
8 Progress bar
Updating the firmware
From the Samsung i-Launcher screen, click Firmware Upgrade.
Downloading the PC Auto Backup program
(ST150F/ST151F/ST152F only)
From the Samsung i-Launcher screen, click PC Auto Backup.
For information about installing the PC Auto Backup program,
refer to page 110.
Connecting to a WLAN and configuring network
settings …………………………………………… 102
Connecting to a WLAN ………………………… 102
Using the login browser ……………………… 103
Network connection tips ……………………… 104
Entering text …………………………………… 105
Saving files to a smart phone automatically … 106
Sending photos or videos to a smart phone … 107
Using a smart phone as a remote shutter
release …………………………………………… 108
Using Auto Backup to send photos or videos … 110
Installing the program for Auto Backup
on your PC ……………………………………… 110
Sending photos or videos to a PC ……………… 110
Sending photos or videos via email …………… 112
Changing email settings ……………………… 112
Sending photos or videos via email …………… 114
Using photo or video sharing websites ……… 115
Accessing a website …………………………… 115
Uploading photos or videos …………………… 115
Using AllShare Play to send files ……………… 117
Uploading photos to online storage …………… 117
Viewing photos or videos on devices that
support AllShare Play ………………………… 118
Sending photos using Wi-Fi Direct …………… 120
Wireless network
(ST150F/ST151F/ST152F only)
Learn to connect to wireless local area networks (WLANs) and use functions.
Wireless network (ST150F/ST151F/ST152F only) 102
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [t] to open network setting options.
• When you select a secured AP, a pop-up window appears. Enter the required
passwords to connect to the WLAN. For information about entering text, refer
to "Entering text". (p. 105)
• When a login page appears, refer to "Using the login browser". (p. 103)
• When you select an unsecured AP, the camera will connect to the WLAN.
• If you select a WPS profile supported AP, select → WPS PIN connection,
and then enter a PIN on the AP device. You can also connect to a WPS profile
supported AP by selecting → WPS button connection on the camera, and
then pushing the WPS button on the AP device.
Connecting to a WLAN
1 On the Home screen, scroll to .
2 Select , , , or .
3 Press [m], and then select Wi-Fi Setting.
• In some modes, follow the on-screen instructions until the Wi-Fi Setting
screen appears.
• The camera automatically searches for available AP devices.
4 Select an AP.
Wi-Fi Setting
Refresh
Samsung 1
Samsung 2
Samsung 3
Samsung 4
Back Manual
• Select Refresh to refresh connectable APs.
• Select Add wireless network to add an AP manually. Your AP name must be
in English to add the AP manually.
Connecting to a WLAN and configuring network settings
Wireless network (ST150F/ST151F/ST152F only) 103
Setting network options
1 In the Wi-Fi Setting screen, move to an AP, and then press [t].
2 Select each option, and then enter the required information.
Option Description
Network Password Enter the network password.
IP Setting Set the IP address automatically or manually.
Manually setting the IP address
1 In the Wi-Fi Setting screen, move to an AP, and then press [t].
2 Select IP Setting → Manual.
3 Select each option, and then enter the required information.
Option Description
IP Enter the static IP address.
Subnet Mask Enter the subnet mask.
Gateway Enter the gateway.
DNS Server Enter the DNS address.
Using the login browser
You can enter your login information via the login browser when connecting to
some APs, sharing sites, or cloud servers.
Button Description
[D/c/F/t] Move to an item or scroll the page.
[o] Select an item.
[m]
Access the following options:
• Previous Page: Move to the previous page.
• Next Page: Move to the next page.
• Reload: Reload the page.
• Stop: Stop loading the page.
• Exit: Close the login browser.
[f] Close the login browser.
• You may not be able to select some items depending on the page you
connected to. This does not indicate a malfunction.
• The login browser may not close automatically after you log into some pages. If
this occurs, close the login browser by pressing [f], and then proceed with the
desired operation.
• It may take longer to load the login page due to the page size or network speed.
If this occurs, wait until the login information input window appears.
Connecting to a WLAN and configuring network settings
Wireless network (ST150F/ST151F/ST152F only) 104
Network connection tips
• You must insert a memory card to use the Wi-Fi features.
• The quality of the network connection will be determined by the AP.
• The further the distance between your camera and the AP, the longer it will take
to connect to the network.
• If a nearby device is using the same radio frequency signal as your camera, it may
interrupt your connection.
• If your AP name is not in English, the camera may not be able to locate the device
or the name may appear incorrectly.
• For network settings or a password, contact your network administrator or
network service provider.
• If a WLAN requires authentication from the service provider, you may not be able
to connect to it. To connect the WLAN, contact your network service provider.
• Depending on the encryption type, the number of digits in the password may
differ.
• A WLAN connection may not be possible in all surroundings.
• The camera may display a WLAN enabled printer on the AP List. You cannot
connect to a network via a printer.
• You cannot connect your camera to a network and a TV simultaneously.
• Connecting to a network may incur additional charges. Costs will vary based on
the conditions of your contract.
• If you cannot connect to a WLAN, try another AP from the available AP list.
• A login page may appear when you select free WLANs provided by some
network service providers. Enter your ID and password to connect to the WLAN.
For information about registering or the service, contact the network service
providers.
• Be cautious when you enter personal information for an AP connection. Do not
enter any payment or credit card information on your camera. The manufacturer
is not liable for any problem caused by entering such information.
• Available network connections may differ by country.
• The WLAN feature of your camera must comply with radio transmission laws in
your region. To ensure compliance, use the WLAN feature only in the country
where you purchased the camera.
• The process for adjusting network settings may differ, depending on network
conditions.
• Do not access a network that you are not authorized to use.
• Before you connect to a network, ensure your battery is fully charged.
• You cannot upload or send files captured in some modes.
• Files that you transfer to another device may not be supported by the device. In
this case, use a computer to playback the files.
Connecting to a WLAN and configuring network settings
Wireless network (ST150F/ST151F/ST152F only) 105
Entering text
Learn how to enter text. The icons in the table below let you move the cursor,
change the case, etc. Press [D/c/F/t] to move to a desired key, and then
press [o] to enter the key.
Cancel Backspace
Done
Icon Description
Delete the last letter.
Move the cursor.
In ABC mode, change the case.
Enter ".com".
Switch between Symbol mode and ABC mode.
Enter a space.
Done Save the displayed text.
View the entering text guide.
• You can use only the English alphabets in some modes, regardless of the display
language.
• To move to Done directly, press [P].
• You can enter up to 64 characters.
• The screen may differ depending on the input mode.
Wireless network (ST150F/ST151F/ST152F only) 106
Saving files to a smart phone automatically
The camera connects to a smart phone that supports the AutoShare feature via a WLAN. When you capture a photo with your camera, the photo is saved to the smart phone
automatically.
• The AutoShare feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before using this
feature, check the device’s firmware and update it if needed.
• You should install the Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store,
or the Apple App Store. The Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
• If you set this function, the setting is maintained even when you change the Shooting mode.
• This feature may not be supported in some modes.
5 On the camera, allow the smart phone to connect to your camera.
• If the smart phone has been connected to your camera before, it is connected
automatically.
• An icon that shows the connection status ( ) will appear on the camera’s
screen.
6 On the camera, capture a photo.
• The captured photo is saved to the camera, and then transferred to the smart
phone.
• If you recorded a video, it is saved only to the camera.
• The GIF file captured in the motion capture mode is not saved on the smart
phone.
1 On the camera, in Shooting mode, press [m].
2 On the camera, select AutoShare → On.
• If the pop-up message that prompts you to download the application
appears, select Next.
3 On the smart phone, turn on the Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the application.
4 Select the camera from the list and connect the smart phone to the
camera.
• The smart phone can connect to only one camera at a time.
Wireless network (ST150F/ST151F/ST152F only) 107
Sending photos or videos to a smart phone
The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your smart phone.
• The MobileLink feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before using this
feature, check the device’s firmware and update it if needed.
• You should install the Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store,
or the Apple App Store. The Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
• When there are no files in the camera memory, you cannot use this feature.
• If you select files from the smart phone, you can view up to 1,000 recent files and send up to 150 files at a time. If you select files from the camera, you can view files that were selected
from the camera. The maximum number of files that can be sent varies depending on the storage space of the smart phone.
5 Select the camera from the list and connect the smart phone to the
camera.
• The smart phone can connect to only one camera at a time.
6 On the camera, allow the smart phone to connect to your camera.
• If the smart phone has been connected to your camera before, it is connected
automatically.
7 On the smart phone or camera, select files to transfer from the
camera.
8 On the smart phone, touch the copy button or on the camera, select
Share.
• The camera will send the files.
1 On the camera's Home screen, scroll to .
2 On the camera, select .
• If the pop-up message that prompts you to download the application
appears, select Next.
3 On the camera, select a sending option.
• If you select Select Files from Smartphone, you can use your smart phone
to view and share files stored on the camera.
• If you select Select Files from Camera, you can select files to send on the
camera.
4 On the smart phone, turn on the Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the application.
Wireless network (ST150F/ST151F/ST152F only) 108
1 On the camera's Home screen, scroll to .
2 On the camera, select .
• If the pop-up message that prompts you to download the application
appears, select Next.
3 On the smart phone, turn on the Samsung SMART CAMERA App.
• For iOS devices, turn on the Wi-Fi feature before turning on the application.
4 Select the camera from the list and connect the smart phone to the
camera.
• The smart phone can connect to only one camera at a time.
5 On the camera, allow the smart phone to connect to your camera.
• If the smart phone has been connected to your camera before, it is connected
automatically.
6 On the smart phone, set the following shooting options.
Icon Description
Flash option
Timer option
Photo size
Saving location
Zoom ratio
• While using this feature, some buttons are not available on your camera.
• The zoom button and the shutter button on your smart phone will not
function when using this feature.
• Remote Viewfinder mode supports the and photo sizes only.
Using a smart phone as a remote shutter release
The camera connects to a smart phone via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature. The captured photo will display on the
smart phone.
• The Remote Viewfinder feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before
using this feature, check the device’s firmware and update it if needed.
• You should install the Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store,
or the Apple App Store. The Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.
Using a smart phone as a remote shutter release
Wireless network (ST150F/ST151F/ST152F only) 109
7 On the smart phone, touch and hold to focus.
• The focus is automatically set to Multi AF.
8 Release to capture the photo.
• The photo will be resized to 640 X 360 when it is stored to the smart phone.
• When you use this feature, the ideal distance between the camera and the smart
phone may vary, depending on your surroundings.
• The smart phone must be within 7 m of the camera to use this feature.
• It will take some time to capture the photo after you release on the smart
phone.
• The Remote Viewfinder function will deactivate when:
- there is an incoming call on the smart phone
- either the camera or the smart phone turn off
- the memory is full
- either device loses its connection to the WLAN
- the Wi-Fi connection is poor or unstable
Wireless network (ST150F/ST151F/ST152F only) 110
Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC wirelessly.
Sending photos or videos to a PC
1 On the camera's Home screen, scroll to .
2 Select .
• If the the pop-up message that prompts you to download the application
appears, select Next.
• You must configure the backup PC information to use the Auto Backup
feature. For more details, refer to “Installing the program for Auto Backup on
your PC”. If the Auto Backup program is installed on your PC, you can save the
PC information via USB cable or Wi-Fi connection.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 102)
Installing the program for Auto Backup on your PC
1 Install i-Launcher on the PC. (p. 96)
2 Connect the camera to the PC with the USB cable.
3 When the Auto Backup program icon appears, click it.
• The Auto Backup program is installed on the PC and the information about
the PC will be stored to the camera. Follow the on-screen instructions to
complete the installation.
• You can also store the information about the PC to the camera by connecting
the PC and the camera via Wi-Fi.
4 Remove the USB cable.
Before installing the program, ensure that the PC is connected to a network.
Using Auto Backup to send photos or videos
Wireless network (ST150F/ST151F/ST152F only) 111
3 Select a backup PC.
• If you have performed a backup before, skip to step 4.
4 Select OK.
• To cancel sending, select Cancel.
• You cannot select individual files to backup. This function backs up only new
files on the camera.
• The backup's progress will be shown on the PC monitor.
• When the transfer is completed, the camera will turn off automatically in
approximately 30 seconds. Select Cancel to return to the previous screen and
prevent the camera from turning off automatically.
• To turn off your PC automatically after the transfer is complete, press [m],
and then select Shut down PC after backup → On.
• To change the backup PC, select Change PC.
• When you connect the camera to the WLAN, select the AP that is connected to
the PC.
• The camera will search for available access points even if you are connecting to
the same access point again.
• If you turn off the camera or remove the battery while sending files, the file
transfer will be interrupted.
• While you are using this feature, the shutter control is disabled on your camera.
• You can connect only one camera to the PC at a time for sending files.
• The backup may be canceled due to network conditions.
• Photos or videos can be sent to a PC one time only. Files cannot be sent again
even if you reconnect your camera to another PC.
• When there are no files in the camera memory, you cannot use this feature.
• You must turn off Windows Firewall and any other firewalls before using this
feature.
• You can send up to 1,000 recent files.
• On the PC software, the server name must be entered in the Latin alphabet and
can contain no more than 48 characters.
• When multiple file types are created at once, only the image files (JPG) will be
sent to the PC with this feature.
Wireless network (ST150F/ST151F/ST152F only) 112
Changing email settings
In the email menu, you can change settings for storing your information. You can
also set or change the email password. For information about entering text, refer to
"Entering text". (p. 105)
Storing your information
1 On the Home screen, scroll to .
2 Select .
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 102)
3 Press [m].
4 Select Sender Setting.
5 Select the Name box, enter your name, and then select Done.
Name
Email
Back
Save Reset
Sender Setting
6 Select the Email box, enter your email address, and then select
Done.
7 Select Save to save your changes.
• To delete your information, select Reset.
Sending photos or videos via email
You can change settings in the email menu and send photos or videos stored on the camera via email.
Sending photos or videos via email
Wireless network (ST150F/ST151F/ST152F only) 113
Setting an email password
1 On the Home screen, scroll to .
2 Select .
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 102)
3 Press [m].
4 Select Setting Password → On.
• To deactivate the password, select Off.
5 When the pop-up appears, press [o].
• The pop-up disappears automatically even if you do not press [o].
6 Enter a 4-digit password.
7 Enter the password again.
8 When the pop-up appears, press [o].
If you lost your password, you can reset it by selecting Reset on the password
setting screen. When you reset the information the previously saved user’s setting
information, email address, and recently sent email list will be deleted.
Changing the email password
1 On the Home screen, scroll to .
2 Select .
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 102)
3 Press [m].
4 Select Change Password.
5 Enter your current 4-digit password.
6 Enter a new 4-digit password.
7 Enter the new password again.
8 When the pop-up appears, press [o].
Sending photos or videos via email
Wireless network (ST150F/ST151F/ST152F only) 114
Sending photos or videos via email
You can send photos or videos stored on the camera via email. For information
about entering text, refer to "Entering text". (p. 105)
1 On the Home screen, scroll to .
2 Select .
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 102)
3 Select the Sender box, enter your email address, and then select
Done.
• If you have previously saved your information, it will be inserted
automatically. (p. 112)
• To use an address from the list of previous senders, select → an address.
4 Select the Receiver box, enter an email address, and then select
Done.
• To use an address from the list of previous recipients, select → an address.
• Select to add additional recipients. You can input up to 30 recipients.
• Select to delete an address from the list.
5 Select Next.
6 Scroll to files to send, and then press [o].
• You can select up to 20 files. The total size must be 7 MB or less.
7 Select Next.
8 Select the Comment box, enter your comments, and then select
Done.
9 Select Send.
• The camera will send the email.
• Even if a photo appears to have transferred successfully, errors with the
recipient’s email account may cause the photo to be rejected or recognized as
spam.
• You may not be able to send an email if no network connection is available or if
your email account settings are incorrect.
• You cannot send an email if the file size exceeds the limit. The maximum
photo resolution you can send is 2M and the longest video you can send is
30 seconds at resolution or a video recorded using . If the selected
photo resolution is higher than 2M, it will be automatically resized to a lower
resolution.
• If you cannot send an email because of firewall or user authentication settings,
contact your network administrator or network service provider.
• When there are no files in the camera memory, you cannot use this feature.
• You can also send an email in Playback mode by pressing [m], and then
selecting Share(Wi-Fi) → Email.
Wireless network (ST150F/ST151F/ST152F only) 115
Accessing a website
1 On the Home screen, scroll to .
2 Select .
3 Select a website.
• If the pop-up message that prompts you to create an account appears, select
OK.
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 102)
4 Enter your ID and password to log in.
• For information about entering text, refer to "Entering text". (p. 105)
• If you connected to SkyDrive, refer to "Using the login browser". (p. 103)
• To select an ID from the list, select → an ID.
• If you have previously logged in to the website, you may be logged in
automatically.
You must have an existing account on the file sharing website to use this feature.
Uploading photos or videos
1 Access the website with your camera.
2 Select files to upload.
• You can select up to 20 files. The total size must be 10 MB or less.
(On some websites, the total size or number of files may vary.)
3 Select Upload.
• On some websites, you can enter your comments by selecting the Comment
box. For information about entering text, refer to "Entering text". (p. 105)
Using photo or video sharing websites
Upload your photos or videos to file sharing websites. Available websites will be displayed on your camera. To upload files to some websites, you must visit the website and
register before connecting your camera.
Using photo or video sharing websites
Wireless network (ST150F/ST151F/ST152F only) 116
• You can set an upload folder for Facebook by pressing [m], and then selecting Upload Folder (Facebook) on the website's list screen.
• You cannot upload files if the file size exceeds the limit. The maximum photo resolution you can upload is 2M, and the longest video you can upload is 30 seconds at resolution
or a video recorded using . If the selected photo resolution is higher than 2M, it will be automatically resized to a lower resolution. (On some websites, the maximum photo
resolution may vary.)
• The method of uploading photos or videos may differ depending on the selected website.
• If you cannot access a website because of firewall or user authentication settings, contact your network administrator or network service provider.
• Uploaded photos or videos may be automatically titled with the date they were captured.
• The speed of your internet connection may affect how quickly photos upload or web pages open.
• When there are no files in the camera memory, you cannot use this feature.
• You can also upload photos or videos to file sharing websites in Playback mode by pressing [m], and then selecting Share(Wi-Fi) → a desired website.
• You cannot upload videos to some websites.
• When you upload photos to SkyDrive, they will be resized to 2M while maintaining their aspect ratios.
Wireless network (ST150F/ST151F/ST152F only) 117
Uploading photos to online storage
1 On the Home screen, scroll to .
2 Select → Web storage.
• If the guide message appears, press [o].
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 102)
• To change the size for uploaded photos, press [m], and then select
Upload Image Size.
• If you have registered more than two web storage, you can select from the list
by pressing [m], and then selecting Change Web storage.
3 Enter your ID and password, and then select Login → OK.
• For information about entering text, refer to "Entering text". (p. 105)
• To select an ID from the list, select → an ID.
• If you have previously logged in to the website, you may be logged in
automatically.
To use this feature, you must create an AllShare Play account and an account with
an affiliated online storage service using your PC. After finishing creating accounts,
add your online storage account to AllShare Play.
4 Scroll to the files you want to upload, and then press [o].
5 Select Upload.
• If you have registered more than two web storage, select a web storage first.
• You cannot upload video files to AllShare Play online storage.
• When there are no files in the camera memory, you cannot use this feature.
• You can upload up to 20 files.
• You can also upload photos in Playback mode by pressing [m], and then
selecting Share(Wi-Fi) → AllShare Play.
Using AllShare Play to send files
You can upload files from your camera to AllShare Play online storage or view files on an AllShare Play device connected to the same AP.
Using AllShare Play to send files
Wireless network (ST150F/ST151F/ST152F only) 118
Viewing photos or videos on devices that support AllShare
Play
1 On the Home screen, scroll to .
2 Select → Nearby devices.
• If the guide message appears, press [o].
• The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 102)
• You can set to allow only selected devices or all devices to connect by
pressing [m], and then selecting DLNA Access Control on the screen.
• A sharing file list is created. Wait until other devices can find your camera.
3 Connect the AllShare Play device to a network, and then turn on the
AllShare Play feature.
• Refer to your device's user manual for more information.
4 On the camera, allow the AllShare Play device to connect to your
camera.
5 On the AllShare Play device, select a camera to connect.
6 On the AllShare Play device, browse the shared photos or videos.
• For information about searching for the camera and browsing the photos or
videos on the AllShare Play device, refer to the device's user manual.
• Videos may not play smoothly depending on the type of AllShare Play
device or the network condition. If this happens, re-record the video in
or smaller quality and play it again. If videos do not play smoothly on your
device over the wireless connection, try connecting the camera to the device
with an A/V cable.
AP
 A camera is connected to a TV that supports AllShare Play via WLAN.
Using AllShare Play to send files
Wireless network (ST150F/ST151F/ST152F only) 119
• You can share up to 1,000 recent files.
• On an AllShare Play device, you can view only photos or videos captured with your camera.
• The range of the wireless connection between your camera and an AllShare Play device may vary depending on the specifications of the AP.
• If the camera is connected to 2 AllShare Play devices, playback may be slower.
• Photos or videos will be shared in their original sizes.
• You can use this feature only with devices that support AllShare Play.
• Shared photos or videos will not be stored on the AllShare Play device, but they can be stored in the camera to meet the device's specifications.
• Transferring photos or videos to the AllShare Play device may take some time depending on the network connection, the number of files to be shared, or the sizes of the files.
• If you power off the camera abnormally while viewing photos or videos on an AllShare Play device (for example, by removing the battery), the device considers the camera to still be
connected.
• The order of photos or videos on the camera may be different than on the AllShare Play device.
• Depending on the number of photos or videos you want to share, it may take some time to load your photos or videos and complete the initial set-up process.
• While viewing photos or videos on the AllShare Play device, continuously using the device's remote or performing additional operations on the device may prevent this feature from
working properly.
• If you reorder or sort files on the camera while viewing them on an AllShare Play device, you must repeat the initial set-up process to update the list of files on the device.
• When there are no files in the camera memory, you cannot use this feature.
• We recommend you use a network cable to connect your AllShare Play device to your AP. This will minimize any video ‘Stuttering’ you may experience when streaming content.
• To view files on an AllShare Play device using the Nearby devices feature, enable multicast mode on your AP.
Wireless network (ST150F/ST151F/ST152F only) 120
Sending photos using Wi-Fi Direct
When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature may not be supported on some
devices.
5 On the device, allow the camera to connect to the device.
• The photo will be sent to the device.
• You can send up to 20 files at a time.
• When there are no files in the camera memory, you cannot use this feature.
• If you cannot connect to a Wi-Fi Direct device, update the device with the latest
firmware. This feature may not be supported on some devices.
1 On the device, turn on the Wi-Fi Direct option.
2 On the camera, in Playback mode, scroll to a photo.
3 Press [m], and then select Share(Wi-Fi) → Wi-Fi Direct.
• When in the single image view, you can send only one photo at a time.
• When in the thumbnails view, you can select multiple photos by scrolling
to thumbnails, and then pressing [o]. Select Next when you are finished
selecting photos.
4 Select the device from the camera’s list of Wi-Fi Direct devices.
• Ensure that the device's Wi-Fi Direct option is turned on.
• You can also select your camera from the device's list of Wi-Fi Direct devices.
Settings menu ……………………………………… 122
Accessing the settings menu …………………… 122
Sound ……………………………………………… 123
Display …………………………………………… 123
Connectivity ……………………………………… 124
General …………………………………………… 125
Settings
Refer to options to configure your camera’s settings.
Settings 122
4 Select an item.
Back Select
Medium
On Sound 1
Off
On Volume
Beep Sound
Shutter Sound
Start Sound
AF Sound
Sound
5 Select an option.
Back Select
Off
Low
Medium
High
Volume
6 Press [m] to return to the previous screen.
Accessing the settings menu
1 On the Home screen, scroll to .
2 Select .
3 Select a menu.
Settings
Sound
Display
Connectivity
General
Icon Description
Sound: Set various camera sounds and the volume. (p. 123)
Display: Customize the display settings. (p. 123)
Connectivity: Set the connection options. (p. 124)
General: Change the settings for the camera system such as
memory format and default file name. (p. 125)
Settings menu
Learn to configure your camera's settings.
Settings menu
Settings 123
Display
* Default
Item Description
Start Image
Set a start image to display when the camera turns on.
• Off*: Display no start image.
• Logo: Display a default image stored in the internal memory.
• User Image: Select User Image from the photos you captured
in the memory.
• The camera will save only one User Image in the internal
memory at a time.
• If you select a new photo as a User Image or reset your
camera, the camera will delete the current image.
Wallpapers Set wallpaper for the Home screen with the desired image. (Wallpaper Gallery, Album)
Guide Line Select a guide to help you compose a scene. (Off*, 3 X 3, 2 X 2, Cross, Diagonal)
Date/Time
Display
Set whether or not to display the date and time on the camera's
display. (Off*, On)
Help Guide
Display Display a brief description of an option or menu. (Off, On*)
Sound
* Default
Item Description
Volume Set the volume of all sounds. (Off, Low, Medium*, High)
Beep Sound Set the sound the camera emits when you press the buttons or switch modes. (Off, On*)
Shutter Sound Set the sound the camera emits when you press the shutter button. (Off, Sound 1*, Sound 2, Sound 3)
Start Sound Set the sound the camera emits when you turn on your camera. (Off*, Star Flight, Laser Show, Cloud)
AF Sound Set the sound the camera emits when you half-press the shutter button. (Off, On*)
Settings menu
Settings 124
Connectivity
* Default
Item Description
Video Out
Set the video signal output for your region.
• NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
• PAL (supports only BDGHI): Australia, Austria, Belgium, China,
Denmark, England, Finland, France, Germany, Italy, Kuwait,
Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand, etc
i-Launcher Set i-Launcher to launch automatically when you connect your camera to your computer. (Off, On*)
* Default
Item Description
Display
Brightness
Adjust the brightness of the screen. (Auto*, Dark, Normal,
Bright)
Normal is fixed in Playback mode even if you have selected
Auto.
Quick View
Set whether or not to review a captured image before returning
to the Shooting mode. (Off, On*)
This feature does not work in some modes.
Power Save
If you perform no operations for 30 seconds, the camera
automatically switches to Power save mode. (Off*, On)
In Power save mode, press any button other than [X] to
resume using the camera.
Settings menu
Settings 125
* Default
Item Description
File No.
Specify how to name files.
• Reset: Set the file number to start from 0001 when you
insert a new memory card, format a memory card, or
delete all files.
• Series*: Set the file number to resume from the
previous file number when you insert a new memory
card, format a memory card, or delete all files.
• The default name of the first folder is 100PHOTO and
the default name of the first file is SAM_0001.
• The file number increases by one, from SAM_0001 to
SAM_9999, each time you take a picture.
• The folder number increases by one, from 100PHOTO
to 999PHOTO, each time a folder is full.
• The maximum number of files that can be stored in
one folder is 9,999.
• The camera defines file names according to the Design
rule for Camera File system (DCF) standard. If you
intentionally change file names, the camera may not
play back the files.
General
* Default
Item Description
Network Information
(ST150F/ST151F/
ST152F only)
View the Mac address and network certification number
of your camera.
Language Set a language for the display text.
Time Zone
Set the time zone for your location. When you travel
to another country, select Visit, and then select the
appropriate time zone. (Home*, Visit)
Date/Time Set Set the date and time.
Date Type
Set a date format. (YYYY/MM/DD, MM/DD/YYYY,
DD/MM/YYYY)
The default date type may differ depending on the
language selected.
Time Type
Set the time format. (12 Hr, 24 Hr)
The default time type may differ depending on the
language selected.
Settings menu
Settings 126
* Default
Item Description
DIRECT LINK
(Wi-Fi Button)
(ST150F/ST151F/
ST152F only)
Start a preset Wi-Fi function by pressing [x].
(AutoShare*, MobileLink, Remote Viewfinder,
Auto Backup, Email, SNS & Cloud, AllShare Play)
AF Lamp Set a light to automatically turn on in dark places to help you focus. (Off, On*)
Format
Format the internal memory and the memory card.
Formatting will delete all files, including protected files.
(Yes, No)
Errors can occur if you use a memory card formatted by
another brand of camera, a memory card reader, or a
computer. Please format memory cards in the camera
before using them to capture photos.
Reset
Reset menus and shooting options. Date and time,
language, and video output settings will not be reset.
(Yes, No)
Open Source Licenses View open source licenses.
* Default
Item Description
Imprint
Set whether or not to display the date and time on
captured photos. (Off*, Date, Date & Time)
• The date and time will be displayed on the bottom
right corner of the photo.
• Some printer models may not print the date and time
properly.
• The photo will not display the date and time if:
- you select Text in Scene mode
- you select Live Panorama, Motion Photo mode
Auto Power Off
Set the camera to automatically turn off when you
perform no operations for a specified period.
(Off, 1 min, 3 min*, 5 min, 10 min)
• Your settings will not change when you replace the
battery.
• The camera will not automatically turn off when the
camera is connected to a computer or WLAN, and
while you are playing a slide show or videos.
Error messages ……………………………………… 128
Camera maintenance ……………………………… 129
Cleaning your camera …………………………… 129
Using or storing the camera ……………………… 130
About memory cards ……………………………… 131
About the battery ………………………………… 134
Before contacting a service center ……………… 138
Camera specifications ……………………………… 141
Glossary …………………………………………… 145
Index ………………………………………………… 150
Appendixes
Get information about error messages, specifications, and maintenance.
Appendixes 128
Error message Suggested remedies
Card Error
• Turn off your camera, and then turn it on again.
• Remove your memory card, and then insert it again.
• Format your memory card.
Card not supported.
The inserted memory card is not supported by your
camera. Insert a microSD, microSDHC, or microSDXC
memory card.
Connection failed.
• The camera cannot connect to the network using the
selected access point. Select another AP and try again.
• The camera has failed to connect to the other devices.
Try connecting again.
DCF Full Error
File names do not match the DCF standard. Transfer
the files from the memory card to your computer and
format the card. Then, open the Settings menu and
select General → File No. → Reset. (p. 125)
Device disconnected. Network connection disconnected while transferring photos. Reselect a device that supports AllShare Play.
File Error Delete the damaged file or contact a service center.
Error message Suggested remedies
File system not
supported.
Your camera does not support the FAT file structure of
the inserted memory card. Format the memory card on
the camera.
Initialization failed.
The camera has failed to locate a device that supports
AllShare Play. Turn on devices on the network that
support AllShare Play.
Invalid password.
The password for transferring files to another camera is
wrong. Enter the correct password again.
Low Battery Insert a charged battery or recharge the battery.
Memory Full Delete unnecessary files or insert a new memory card.
No Image File
Capture photos or insert a memory card that contains
some photos.
Photo transfer failed.
Network connection disconnected while transferring
photos. Try restarting the AllShare Play feature.
Transfer failed.
• The camera has failed to send a photo to the other
devices. Try sending again.
• The camera has failed to send an email or transfer a
photo to a device that supports AllShare Play. Check
the network connection and try again.
Error messages
When the following error messages appear, try these remedies.
Appendixes 129
Cleaning your camera
Camera lens and display
Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any
dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe
gently.
Camera body
Wipe gently with a soft, dry cloth.
• Never use benzene, thinners, or alcohol to clean the device. These solutions can
damage the camera or cause it to malfunction.
• Do not press on the lens cover or use a blower brush on the lens cover.
Camera maintenance
Camera maintenance
Appendixes 130
Using or storing the camera
Inappropriate places to use or store the camera
• Avoid exposing the camera to very cold or very hot temperatures.
• Avoid using your camera in areas with extremely high humidity, or where the
humidity changes drastically.
• Avoid exposing the camera to direct sunlight and storing it in hot, poorlyventilated areas, such as in a car during summer time.
• Protect your camera and the display from impact, rough handling, and excessive
vibration to avoid serious damage.
• Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated
areas to prevent damage to moving parts and internal components.
• Do not use your camera near fuels, combustibles, or flammable chemicals. Do
not store or carry flammable liquids, gases, or explosive materials in the same
compartment as the camera or its accessories.
• Do not store the camera where there are mothballs.
Using on beaches or shores
• Protect your camera from sand and dirt when you use it on beaches or in similar
areas.
• Your camera is not waterproof. Do not handle the battery, adapter, or memory
card with wet hands. Operating the camera with wet hands may cause damage to
your camera.
Storing for extended period of time
• When you store the camera for an extended period, place it in a sealed container
with an absorbent material, such as silica gel.
• Over time, unused batteries will discharge and must be recharged before use.
• You must reset the date and time when you turn the camera on after the camera
and battery have been separated for a prolonged period.
Using the camera with caution in humid environments
When you transfer the camera from a cold environment to a warm one,
condensation can form on the lens or internal components of the camera. In this
situation, turn off the camera and wait for at least 1 hour. If condensation forms
on the memory card, remove the memory card from the camera and wait until all
moisture has evaporated before reinserting it.
Other cautions
• Do not swing your camera by the strap. This may cause injury to yourself or others
or damage to your camera.
• Do not paint your camera, as paint can clog moving parts and prevent proper
operation.
• Turn off the camera when not using it.
• Your camera contains delicate parts. Avoid impacts to the camera.
Camera maintenance
Appendixes 131
• Protect the display from external force by keeping it in the case when not in
use. Protect the camera from scratches by keeping it away from sand, sharp
implements, or loose change.
• Do not use the camera if the screen is cracked or broken. Broken glass or acrylic
could cause injury to your hands and face. Take the camera to a Samsung service
center to have it repaired.
• Never place cameras, batteries, chargers, or accessories near, on, or in heating
devices, such as microwave ovens, stoves, or radiators. These devices may be
deformed and can overheat and cause a fire or explosion.
• Do not expose the lens to direct sunlight, as this may discolor the image sensor or
cause it to malfunction.
• Protect the lens from fingerprints and scratches. Clean the lens with a soft, clean,
debris-free lens cloth.
• The camera may turn off if struck or dropped. This is to protect the memory card.
Turn on the camera to use it again.
• While you use the camera, it may heat up. This is normal and should not affect
your camera’s lifespan or performance.
• When you use the camera in low temperatures, it may take some time to turn on,
the color of the display may be changed temporarily, or after-images may appear.
These conditions are not malfunctions and they will correct themselves when the
camera is returned to milder temperatures.
• Paint or metal on the outside of the camera may cause allergies, itchy skin,
eczema, or swelling for people with sensitive skin. If you experience any of these
symptoms, stop using the camera immediately and consult a doctor.
• Do not insert foreign objects into any of your camera’s compartments, slots, or
access points. Damage due to improper use may not be covered by your warranty.
• Do not allow unqualified personnel to service the camera or attempt to service
the camera yourself. Any damage that results from unqualified service is not
covered by your warranty.
About memory cards
Supported memory cards
Your camera supports microSD (Secure Digital), microSDHC (Secure Digital High
Capacity), or microSDXC (Secure Digital eXtended Capacity) memory cards.
Memory card adapter
Memory card
To read data with a PC or memory card reader, insert the memory card into a
memory card adapter.
Camera maintenance
Appendixes 132
Memory card capacity
The memory capacity may differ depending on the scenes you shoot or shooting
conditions. These capacities are based on a 2 GB microSD card:
Photo
Size Super Fine Fine Normal
218 430 637
244 481 711
287 564 832
340 666 979
634 1222 1768
1000 1887 2678
1322 2448 3419
2495 4336 5750
Video
Size 30fps
1280 X 720 Approx. 26' 20"
640 X 480 Approx. 46' 55"
320 X 240 Approx. 261' 11"
For Sharing
(ST150F/ST151F/ST152F only)
Approx. 261' 11"
The figures above are measured without using the zoom function. Available recording time
may vary if you use the zoom. Several videos were recorded in succession to determine the
total recording time.
Camera maintenance
Appendixes 133
Cautions when using memory cards
• Avoid exposing memory cards to very cold or very hot temperatures (below
0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can cause memory cards
to malfunction.
• Insert a memory card in the correct direction. Inserting a memory card in the
wrong direction may damage your camera and memory card.
• Do not use memory cards that have been formatted by other cameras or by a
computer. Reformat the memory card with your camera.
• Turn off the camera before you insert or remove the memory card.
• Do not remove the memory card or turn off your camera while the lamp is
blinking, as this may damage your data.
• When the lifespan of a memory card has expired, you cannot store any more
photos on the card. Use a new memory card.
• Do not bend, drop, or subject memory cards to heavy impact or pressure.
• Avoid using or storing memory cards near strong magnetic fields.
• Avoid using or keeping memory cards in areas with high temperatures, high
humidity, or corrosive substances.
• Prevent memory cards from making contact with liquids, dirt, or foreign
substances. If dirty, wipe the memory card clean with a soft cloth before you
insert the memory card into your camera.
• Do not allow liquids, dirt, or foreign substances to come in contact with memory
cards or the memory card slot. Doing so may cause memory cards or the camera
to malfunction.
• When you carry a memory card, use a case to protect the card from electrostatic
discharges.
• Transfer important data to other media, such as a hard disk, CD, or DVD.
• When you use the camera for an extended period, the memory card may become
warm. This is normal and does not indicate a malfunction.
The manufacturer is not responsible for any loss of data.
Camera maintenance
Appendixes 134
About the battery
Use only Samsung-approved batteries.
Battery specifications
Specification Description
Model BP70A
Type Lithium-ion battery
Cell capacity 700 mAh
Voltage 3.7 V
Charging time* (when the camera is
switched off) Approximately 160 min
* Charging the battery by connecting it to a computer may take longer.
Battery life
Average shooting time/
Number of photos Test conditions (when the battery is fully charged)
Photos
Approximately
125 min/
Approximately
250 photos
The battery life was measured under the following
conditions: in Program mode, in darkness,
resolution, Fine quality, DIS on.
1. Set the flash option to Fill in, take a single shot,
and zoom in or out.
2. Set the flash option to Off, take a single shot, and
zoom in or out.
3. Perform steps 1 and 2, waiting 30 seconds
between each step. Repeat the process for
5 minutes, and then turn off the camera for
1 minute.
4. Repeat steps 1 to 3.
Videos Approximately 100 min Record videos at resolution and 30 FPS.
• The figures above are measured by Samsung’s standards. Your results may differ,
depending on your actual usage.
• Several videos were recorded in succession to determine the total recording time.
• When using network functions, the battery will be depleted more quickly.
Camera maintenance
Appendixes 135
Low battery message
When the battery has fully discharged, the battery icon will turn red and the "Low
Battery" message will appear.
Notes about using the battery
• Avoid exposing batteries to very cold or very hot temperatures (below 0 °C/32 °F
or above 40 °C/104 °F). Extreme temperatures can reduce the charging capacity of
your batteries.
• When you use the camera for an extended period, the area around the battery
chamber may become warm. This does not affect the normal use of the camera.
• Do not pull the power supply cord to disconnect the plug from the power outlet,
as this may cause a fire or electric shock.
• In temperatures below 0 °C/32 °F, battery capacity and battery life may decrease.
• Battery capacity may decrease in low temperatures, but will return to normal in
milder temperatures.
• Remove the batteries from your camera when storing it for an extended period.
Installed batteries may leak or corrode over time and cause serious damage
to your camera. Storing the camera for extended periods with the battery
installed causes the battery to discharge. You may not be able to recharge a fully
discharged battery.
• When you do not use the camera for an extended period (3 months or more),
check the battery and recharge it regularly. If you let the battery discharge
continually, its capacity and life may decrease, which can lead to a malfunction,
fire, or explosion.
Cautions about using the battery
Protect batteries, chargers, and memory cards from damage
Prevent batteries from making contact with metal objects, as this can create a
connection between the + and – terminals of your battery and lead to temporary or
permanent battery damage and may cause a fire or electric shock.
Notes about charging the battery
• If the status lamp is off, make sure that the battery is inserted correctly.
• If the camera is on while charging, the battery may not fully charge. Turn off the
camera before charging the battery.
• Do not use your camera when you are charging the battery. This may cause a fire
or electric shock.
• Do not pull the power supply cord to disconnect the plug from the power outlet,
as this may cause a fire or electric shock.
• Let the battery charge for at least 10 minutes before turning on the camera.
• If you connect the camera to an external power source when the battery is
depleted, using high energy-consuming functions will cause the camera to turn
off. To use the camera normally, recharge the battery.
Camera maintenance
Appendixes 136
• If you reconnect the power cable when the battery is fully charged, the status
lamp turns on for approximately 30 minutes.
• Using the flash or recording videos depletes the battery quickly. Charge the
battery until the red status lamp turns off.
• If the status lamp blinks in red, reconnect the cable, or remove the battery and
insert it again.
• If you charge the battery when the cable is overheated or the temperature is too
high, the status lamp may blink in red. Charging will start when the battery cools
down.
• Overcharging batteries may shorten battery life. After charging is finished,
disconnect the cable from your camera.
• Do not bend or place heavy objects on the AC cable. Doing so may damage the
cable.
Notes about charging with a computer connected
• Use only the provided USB cable.
• The battery may not charge when:
- you use a USB hub
- other USB devices are connected to your computer
- you connect the cable to the port on the front side of your computer
- the USB port of your computer does not support the power output standard
(5 V, 500 mA)
Handle and dispose of batteries and chargers with care
• Never dispose of batteries in a fire. Follow all local regulations when you dispose
of used batteries.
• Never place batteries or cameras on or in heating devices, such as microwave
ovens, stoves, or radiators. Batteries may explode when they are overheated.
Camera maintenance
Appendixes 137
Personal injury or death can occur if the battery is handled carelessly
or improperly. For your safety, follow these instructions for proper
battery handling:
• The battery can ignite or explode if not handled properly.
If you notice any deformities, cracks, or other abnormalities in the battery,
immediately discontinue use of the battery and contact a service center.
• Use only authentic, manufacturer-recommend battery chargers and
adapters and charge the battery only by the methods described in this
user manual.
• Do not place the battery near heating devices or expose it to excessively
warm environments, such as the inside of an enclosed car in the
summertime.
• Do not place the battery in a microwave oven.
• Avoid storing or using the battery in hot, humid places, such as spas or
shower enclosures.
• Do not rest the device on flammable surfaces, such as bedding, carpets,
or electric blankets for a prolonged period.
• When the device is switched on, do not leave it in any confined space for
a prolonged period.
• Do not allow battery terminals to come in contact with metallic objects,
such as necklaces, coins, keys, or watches.
• Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries.
• Do not disassemble the battery or puncture it with any sharp object.
• Avoid exposing the battery to high pressure or crushing forces.
• Avoid exposing the battery to major impacts, such as dropping it from
high places.
• Do not expose the battery to temperatures of 60 °C (140 °F) or above.
• Do not allow the battery to come in contact with moisture or liquids.
• Do not expose the battery to sources of excessive heat such as sunshine,
fire or the like.
Disposal guidelines
• Dispose of the battery with care.
• Do not dispose of the battery in a fire.
• Disposal regulations may differ by country or region.Dispose of the
battery in accordance with all local and federal regulations.
Guidelines for charging the battery
Charge the battery only by the methods described in this user manual. The
battery can ignite or explode if not charged properly.
Appendixes 138
Situation Suggested remedies
Cannot turn on the
camera
• Ensure that the battery is inserted.
• Ensure that the battery is inserted correctly. (p. 23)
• Charge the battery.
The power turns off
suddenly
• Charge the battery.
• Your camera may be in Auto Power Off mode. (p. 126)
• The camera may turn off to prevent the memory card
from being damaged due to an impact. Turn on your
camera again.
The camera is losing
battery power quickly
• The battery may lose power more quickly in low
temperatures (below 0 °C/32 °F). Keep the battery warm
by putting it into your pocket.
• Using the flash or recording videos depletes the battery
quickly. Recharge if needed.
• Batteries are consumable parts that must be replaced
over time. Get a new battery if the battery life is
diminishing quickly.
Situation Suggested remedies
Cannot capture
photos
• There is no space on the memory card. Delete
unnecessary files or insert a new card.
• Format the memory card.
• The memory card is defective. Get a new memory card.
• Make sure that the camera is switched on.
• Charge the battery.
• Make sure that the battery is inserted correctly.
The camera freezes Remove the battery and insert it again.
The camera heats up
While you use the camera, it may heat up. This is
normal and should not affect your camera’s lifespan or
performance.
The flash does not
work
• The flash option may be set to Off. (p. 61)
• You cannot use the flash in some modes.
Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still
having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Before contacting a service center
Appendixes 139
Situation Suggested remedies
The flash fires
unexpectedly
The flash may fire due to static electricity. The camera is
not malfunctioning.
The date and time are
incorrect Set the date and time in the display settings. (p. 125)
The display or
buttons do not work Remove the battery, and then insert it again.
The camera display
responds poorly
If you use your camera at very low temperatures, it may
cause the camera screen to malfunction or discolor. For
better performance of your camera screen, use your
camera in moderate temperatures.
The memory card has
an error
• Turn off your camera, and then turn it on again.
• Remove your memory card, and then insert it again.
• Format your memory card.
See "Cautions when using memory cards" for more detail.
(p. 133)
Cannot play back files
If you change the name of a file, your camera may not
play the file (the name of the file should meet the DCF
standard). If you encounter this situation, play back the
files on your computer.
Situation Suggested remedies
The photo is blurry
• Make sure that the focus option you set is suitable for
close-up shots. (p. 64)
• Make sure that the lens is clean. If not, clean the lens.
(p. 129)
• Make sure that the subject is within range of the flash.
(p. 142)
The colors in the
photo do not match
the actual scene
An incorrect White Balance can create unrealistic color.
Select the proper White Balance option to suit the light
source. (p. 71)
The photo is too
bright
Your photo is overexposed.
• Turn off the flash. (p. 61)
• Adjust the ISO sensitivity. (p. 63)
• Adjust the exposure value. (p. 69)
The photo is too dark
Your photo is underexposed.
• Turn on the flash. (p. 61)
• Adjust the ISO sensitivity. (p. 63)
• Adjust the exposure value. (p. 69)
Before contacting a service center
Appendixes 140
Situation Suggested remedies
The TV does not
display your photos
• Make sure that the camera is correctly connected to the
TV with the A/V cable.
• Make sure that your memory card contains photos.
Your computer does
not recognize your
camera
• Make sure that the USB cable is connected correctly.
• Make sure that your camera is switched on.
• Make sure that you are using a supported operating
system.
Your computer
disconnects the
camera while
transferring files
The file transmission may be interrupted by static
electricity. Disconnect the USB cable and connect it again.
Your computer
cannot play videos
Videos may not play on some video player programs.
To play video files captured with your camera, use the
Multimedia Viewer program that you can install with the
i-Launcher program on your computer.
Situation Suggested remedies
i-Launcher is not
functioning properly
• End i-Launcher and restart the program.
• Make sure that i-Launcher is set to On in the settings
menu. (p. 124)
• Depending on your Windows computer's specifications
and environment, the program may not launch
automatically. In this case, click Start → All Programs
→ Samsung → i-Launcher → Samsung i-Launcher on
your computer. (For Windows 8, click Start → All apps
→ Samsung i-Launcher.) Or, click Applications →
Samsung → i-Launcher on your Mac OS computer.
Your TV or computer
cannot display
photos and videos
that are stored on a
microSDXC memory
card.
microSDXC memory cards use the exFAT file system.
Ensure that the external device is compatible with the
exFAT file system before connecting the camera to the
device.
Your computer does
not recognize a
microSDXC memory
card.
microSDXC memory cards use the exFAT file system.
To use microSDXC memory cards on a Windows XP
computer, download and update the exFAT file system
driver from the Microsoft website.
Appendixes 141
Image sensor
Type 1/2.3" (Approximately 7.76 mm) CCD
Effective pixels Approximately 16.2 mega-pixels
Total pixels Approximately 16.5 mega-pixels
Lens
Focal length Samsung Lens f = 4.5–22.5 mm (35 mm film equivalent: 25–125 mm)
F-stop range F2.5 (W)–F6.3 (T)
Zoom
• Still image mode: 1.0–5.0X
(Optical zoom X Digital zoom: 25.0X,
Optical zoom X Intelli zoom: 10.0X)
• Playback mode : 1.0–14.4X (depending on image size)
Display
Type TFT LCD
Feature 3.0" (75.0 mm) 230K
Focusing
Type TTL auto focus (Center AF, Multi AF, Tracking AF, Face Detection AF)
Range
Wide (W) Tele (T)
Normal (AF)
31 in. (80 cm)–
infinity
98 in. (250 cm)–
infinity
Macro
2–31 in.
(5–80 cm)
39–98 in.
(100–250 cm)
Auto Macro
2 in. (5 cm)–
infinity
39 in. (100 cm)–
infinity
Shutter speed
• Auto: 1/8–1/2,000 sec.
• Program: 1–1/2,000 sec.
• Night: 16–1/2,000 sec.
• Fireworks: 2 sec.
Exposure
Control Program AE
Metering Multi, Spot, Center-weighted, Face Detection
Compensation ± 2EV (1/3 EV Step)
ISO equivalent Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200
Camera specifications
Camera specifications
Appendixes 142
Flash
Mode Off, Smart Auto, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix
Range
• Wide: 8-157 in. (0.2-4.0 m) (ISO Auto)
• Tele: 20–63 in. (0.5–1.6 m) (ISO Auto)
Recharging time Approximately 5 sec.
Shake reduction
Digital Image Stabilization (DIS)
Effect
Photo Shooting
mode
• Photo Filter (Smart Filter): Miniature, Vignetting, Ink Painting,
Oil Painting, Cartoon, Cross Filter, Sketch, Soft Focus, Fisheye, Old Film, Half Tone Dot, Classic, Retro, Zooming Shot
• Image Adjust: Sharpness, Contrast, Saturation
Video Shooting
mode
Movie Filter (Smart Filter): Miniature, Vignetting, Half Tone Dot,
Sketch, Fish-eye, Classic, Retro, Palette Effect 1, Palette Effect 2,
Palette Effect 3, Palette Effect 4
White Balance
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set
Date Imprinting
Date & Time, Date, Off
Shooting
Photos
• Modes: Smart Auto (Portrait, Night Portrait, Backlight
Portrait, Night, Backlight, Landscape, White, Natural Green,
Blue Sky, Sunset, Macro, Macro text, Macro Color, Tripod,
Action, Fireworks, Candle, Spotlight, Spotlight (Macro),
Spotlight (Portrait)), Program, Scene (Landscape, Sunset,
Dawn, Backlight, Beach & Snow, Text), Live Panorama,
Beauty Shot, Night Shot, Close-up Shot, Magic Frame,
Photo Filter, Split Shot, Motion Photo
• Burst: Single, Continuous, Motion Capture, AEB
• Timer: Off, 10 Sec, 2 Sec, Double (10 Sec, 2 Sec)
Videos
• Modes: Smart Movie (Landscape, Blue Sky, Natural Green,
Sunset), Movie, Movie Filter
• Format: MP4 (H.264) (Max recording time: 20 min)
• Size: 1280 X 720, 640 X 480, 320 X 240,
For Sharing (ST150F/ST151F/ST152F only)
• Frame Rate: 30 fps
• Sound Alive: Sound Alive On, Sound Alive Off, Mute
• Video editing (embedded): Pause during recording
Camera specifications
Appendixes 143
Playback
Photos
• Type: Single image, Thumbnails, Multi Slide Show with Music
and Effect, Movie clip
• Edit: Resize, Rotate, Smart Filter, Crop
• Effect: Image Adjust (Brightness, Contrast, Saturation, ACB,
Face Retouch, Red-eye Fix), Smart Filter (Normal, Miniature,
Vignetting, Ink Painting, Oil Painting, Cartoon, Cross Filter,
Sketch, Soft Focus, Fish-eye, Old Film, Half Tone Dot, Classic,
Retro, Zooming Shot)
Videos Edit: Still image capture, Time trimming
Storage
Media
• Internal memory: Approximately 9.5 MB
• External memory (Optional):
microSD card (2 GB guaranteed),
microSDHC card (up to 32 GB guaranteed),
microSDXC card (up to 64 GB guaranteed)
Internal memory capacity may not match these specifications.
File format
• Still Image: JPEG (DCF), EXIF 2.21, GIF
• Movie Clip: MP4 (Video: MPEG-4.AVC/H.264, Audio: AAC)
Image size
Icon Size
4608 X 3456
4608 X 3072
4608 X 2592
3648 X 2736
2592 X 1944
1984 X 1488
1920 X 1080
1024 X 768
Wireless network (ST150F/ST151F/ST152F only)
MobileLink, Remote Viewfinder, Auto Backup, Email, SNS & Cloud, AllShare Play,
AutoShare, Wi-Fi Direct, S/W Upgrade Notifier
Camera specifications
Appendixes 144
Interface
Digital output
connector USB 2.0
Audio input/
output Internal speaker (Mono), Microphone (Mono)
Video output A/V: NTSC, PAL (selectable)
DC power input
connector 5.0 V
Power source
Rechargeable
battery Lithium-ion battery (BP70A, 700 mAh)
Connector type Micro USB (5 pin)
The power source may differ depending on your region.
Dimensions (W X H X D)
3.7X2.3X0.7 in. (94.4 X 57.95 X 17.7 mm) (without protrusions)
Weight
• ST150F/ST151F/ST152F: 4 oz. (112 g) (without battery and memory card)
• ST72/ST73: 3.8 oz. (108 g) (without battery and memory card)
Operating Temperature
0–40 °C (32–104 °F)
Operating Humidity
5–85 %
Software
i-Launcher
Specifications may change without notice to improve performance.
Appendixes 145
Glossary
Composition
Composition in photography means arranging objects in a photo. Usually, abiding
by the rule of thirds leads to a good composition.
DCF (Design rule for Camera File system)
A specification to define a file format and file system for digital cameras created by
the Japan Electronics and Information Technology Industries Association (JEITA).
Depth of field
The distance between the nearest and farthest points that can be acceptably
focused in a photograph. Depth of field varies with lens aperture, focal length, and
distance from the camera to the subject. Selecting a smaller aperture, for example,
will increase the depth of field and blur the background of a composition.
Digital zoom
A feature that artificially increases the amount of zoom available with a zoom lens
(Optical zoom). When using the Digital zoom, the image quality will deteriorate as
the magnification increases.
ACB (Auto Contrast Balance)
This feature automatically improves the contrast of your images when the subject is
backlit or when there is a high contrast between your subject and the background.
AEB (Auto Exposure Bracket)
This feature automatically captures several images at different exposures to help
you capture a properly-exposed image.
AF (Auto Focus)
A system that automatically focuses the camera lens on the subject. Your camera
uses the contrast to focus automatically.
Aperture
The aperture controls the amount of light that reaches the camera’s sensor.
Camera shake (Blur)
If the camera is moved while the shutter is open, the entire image may appear
blurred. This occurs more often when the shutter speed is slow. Prevent camera
shake by raising the sensitivity, using the flash, or using a faster shutter speed.
Alternately, use a tripod, the DIS or OIS function to stabilize the camera.
Glossary
Appendixes 146
Exposure
The amount of light allowed to reach the camera’s sensor. Exposure is controlled by
a combination of the shutter speed, the aperture value, and ISO sensitivity.
Flash
A speed light that helps to create adequate exposure in low-light conditions.
Focal length
The distance from the middle of the lens to its focal point (in millimeters). Longer
focal lengths result in narrower angles of view and the subject is magnified. Shorter
focal lengths result in wider angles of view.
H.264/MPEG-4
A high-compression video format established by international standard
organizations ISO-IEC and ITU-T and developed by the Joint Video Team (JVT). This
codec is capable of providing good video quality at low bit rates.
Image sensor
The physical part of a digital camera that contains a photosite for each pixel in
the image. Each photosite records the brightness of the light that strikes it during
an exposure. Common sensor types are CCD (Charge-coupled Device) and CMOS
(Complementary Metal Oxide Semiconductor).
DIS (Digital Image Stabilization)
This feature compensates in real-time for shaking and vibrating while shooting.
There can be a certain amount of image degradation compare to Optical Image
Stabilization.
EV (Exposure Value)
All the combinations of the camera’s shutter speed and lens aperture that result in
the same exposure.
EV Compensation
This feature allows you to quickly adjust the exposure value measured by the
camera, in limited increments, to improve the exposure of your photos. Set the EV
compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step
brighter.
Exif (Exchangeable Image File Format)
A specification to define an image file format for digital cameras created by the
Japan Electronic Industries Development Association (JEIDA).
Glossary
Appendixes 147
MJPEG (Motion JPEG)
A video format which is compressed as a JPEG image.
Noise
Misinterpreted pixels in a digital image that may appear as misplaced or random,
bright pixels. Noise usually occurs when photos are shot with a high sensitivity or
when a sensitivity is automatically set in a dark place.
Optical zoom
This is a general zoom which can enlarge images with a lens and does not degrade
the quality of images.
Quality
An expression of the rate of compression used in a digital image. Higher quality
images have a lower rate of compression, which usually results in a larger file size.
Resolution
The number of pixels present in a digital image. High resolution images contain
more pixels and typically show more detail than low resolution images.
ISO sensitivity
The sensitivity of the camera to light, based on the equivalent film speed used in
a film camera. At higher ISO sensitivity settings, the camera uses a higher shutter
speed, which can reduce blur caused by camera shake and low light. However,
images with high sensitivity are more susceptible to noise.
JPEG (Joint Photographic Experts Group)
A lossy method of compression for digital images. JPEG images are compressed to
reduce their overall file size with minimal deterioration of the image resolution.
LCD (Liquid Crystal Display)
A visual display commonly used in consumer electronics. This display needs a
separate backlight, such as CCFL or LED, to reproduce colors.
Macro
This feature allows you to capture close-up photos of very small objects. When
using the macro feature, the camera can maintain a sharp focus on small objects at
a near life-size ratio (1:1).
Metering
The metering refers to the way in which the camera measures the quantity of light
to set the exposure.
Glossary
Appendixes 148
Shutter speed
Shutter speed refers to the amount of time it takes to open and close the shutter,
and it is an important factor in the brightness of a photo, as it controls the amount
of light which passes through the aperture before it reaches the image sensor. A
fast shutter speed allows less time to let light in and the photo becomes darker and
more easily freezes subjects in motion.
Vignetting
A reduction of an image’s brightness or saturation at the periphery (outer edges)
compared to the center of the image. Vignetting can draw interest to subjects
positioned in the center of an image.
White balance (color balance)
An adjustment of the intensities of colors (typically the primary colors red, green,
and blue), in an image. The goal of adjusting the white balance, or color balance, is
to correctly render the colors in an image.
Appendixes 149
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed
of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can take
these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
PlanetFirst represents Samsung Electronics' commitment to
sustainable development and social responsibility through
eco-driven business and management activities.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in
this product should not be disposed of with other household waste at the end of
their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that
the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can
cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
TA-2012/1717
APPROVED
Appendixes 150
Index
A
AF-assist light
Location 20
Settings 126
AF Lamp 126
AF Sound 123
AllShare Play 117
Auto Backup 110
Auto Contrast Balance (ACB)
Playback mode 91
Shooting mode 70
Auto Exposure Bracket (AEB) 73
AutoShare 106
A/V port 20
B
Battery
Caution 135
Charging 24
Inserting 23
Beauty Shot mode 50
Blink Detection 68
Brightness
Playback mode 91
Shooting mode 69
Burst modes
Auto Exposure Bracket (AEB) 73
Continuous 73
Motion Capture 73
C
Camera maintenance 129
Camera specifications 141
Capturing an image from video 88
Charging 24
Cleaning
Camera body 129
Display 129
Lens 129
Close-up Shot mode 51
Connecting to a computer
Mac 95
Windows 94
Contrast
Playback mode 91
Shooting mode 74
D
Date/Time Set 125
Deleting files 82
Digital Image Stabilization (DIS) 39
Digital zoom 37
Direct Link button 22
Disconnecting the camera 94
Display brightness 124
Display type 34
E
Editing photos 89
Editing videos
Capturing 88
Trimming 88
Enlarging 84
Error messages 128
Exposure 69
Appendixes 151
Index
F
Face Detection 67
Flash
Auto 62
Fill in 62
Off 61
Red-eye 62
Red-eye Fix 62
Slow Sync 62
Focus area
Center AF 65
Multi AF 65
Tracking AF 65
Formatting 126
G
Guide Line 123
H
Half-press shutter 40
Home screen 28
I
Icons
Playback mode 79
Shooting mode 27
i-Launcher 96
Image Adjustment
ACB 91
Brightness
Playback mode 91
Shooting mode 69
Contrast
Playback mode 91
Shooting mode 74
Red-eye 92
Saturation
Playback mode 91
Shooting mode 74
Sharpness 74
Image quality 59
Imprint 126
Intelli zoom 38
ISO sensitivity 63
L
Language settings 125
Live Panorama mode 48
M
Macro 65
Magic Frame mode 52
Memory card
Caution 133
Insert 23
Menu button 21
Metering
Center-weighted 70
Multi 70
Spot 70
Motion Capture 73
Movie Filter mode 54
Movie mode 46
O
Open source licenses 126
Optional accessories 19
Appendixes 152
Start Image 123
Status lamp 21
T
Thumbnails 80
Timer
Shooting mode 60
Timer lamp 20
Time settings 25
Time zone settings 25, 125
Transferring files
Auto Backup 110
Email 112
Mac 95
Windows 94
Tripod mount 20
Shooting portraits
Blink Detection 68
Face Detection 67
Red-eye 62
Red-eye fix 62
Smile Shot 67
Shutter button 20
Slide show 86
Smart Auto mode 43
Smart Filter
Photo shooting mode 53
Playback mode 90
Video recording mode 54
Smart Movie mode 45
Smile Shot 67
Sound settings 35
Split Shot mode 55
Remote Viewfinder 108
Reset 126
Resolution
Playback mode 89
Shooting mode 58
Retouching faces
Playback mode 92
Shooting mode 50
Rotating 89
S
Saturation
Playback mode 91
Shooting mode 74
Scene mode 47
Service center 138
Settings 122
Sharpness 74
P
Photo Filter mode 53
Playback button 21
Playback mode 79
Power button 20
Power save mode 124
Program mode 44
Protecting a file 82
Q
Quick view 124
R
Red-eye
Playback mode 92
Shooting mode 61
Index
Appendixes 153
U
Unpacking 19
USB port 20
V
Video
Playback mode 87
Shooting mode 46
Video out 124
Viewing files
Animated photos 85
Category 81
Panoramic photos 85
Slide show 86
Thumbnails 80
TV 93
W
Website
Accessing 115
Uploading photos or videos 115
White Balance 71
Wireless network (ST150F/ST151F/
ST152F only) 102
Z
Zoom
Using the zoom 37
Zoom button 21
Zoom sound settings 75
Index
Please refer to the warranty that came with your product or
visit our website www.samsung.com for after-sales service or
inquiries.

Online Document Converter

This website help webmasters to achieve a better user experience. Instead of putting a link to download their prices lists and another type of documents, you can simply send a special link to this service, and we will show your document to your users directly without the need of downloading a special application or installing another browsers plugin. Currently, we can read about hundred the most used database files. Moreover, your users can share this document directly on social networks, giving your document additional page views. By using this service, you can save costs by not overloading your own web server, give your users a better way to read documents online without any problems, and allow them to easily download converted copy for offline reading in a format they like.


Previous 10

Next 10